
Posted by McEvoy on 12/3/2006, 11:23 am, in reply to "help in tuning old Fireball w/Hawker de Haviland mast" Regardless of the kind of mast the process for inducing prebend should be the same. There are a number of articles on the Fireball homepage in the Tech Articles section that will give you the basics --Previous Message-- Link: Fireball NA homepage
74.104.29.34
Greg
I suspect the reason that no one has respondedto your request is that no one has heard of this brand of mast. I also suspect that there is a letter missing from your sail and that the original was probably KC 1822 indicating that the boat is Canadian in origin.
: I have a Fireball with a Hawker De
: Haliland mast s/n 2106-175. Having
: issues with getting any mast prebend
: and was looking for information on
: the correct spreader settings for
: this mast. the spreaders measure
: 390mm and 210mm back. The number on
: the sails is C1822, the original
: hull I replaced by building a new
: hull but it's within mm of spec.
: Anyone responding with some info
: would be much appreciated. Also want
: to replace my sails (Bruce Bates).
: Mine I suspect are stretched beyond
: being helped. Anyone want to part
: with a good experienced set of
: sails?
:
Message Thread:
![]()
« Back to thread
Thanks for stopping by!
Phil Locker - CAN14678 - marshall of the message board