Posted by Jim Erke
on 6/1/2009, 2:52 am, in reply to "Re: 63 falcon con. frame"
66.51.188.165
please send me pictures at erke_@live.com
--Previous Message--
:
: Jim,
:
: I measured from the front spring
: bushing bolt hole to end of the
: frame where it is welded to the back
: panel (66 1/2") I also measured
: from front spring bushing hole to
: rear shackle hole (49"). I
: noticed that the shackle on this
: wagon frame rail has a mount and the
: shackle is then bolted to it as
: apposed to a bushing bolt hole like
: on sedans and convertibles. I
: believe that with exception of total
: length the basic configuration is
: the same. I can send you a picture
: but please research further so as
: not waste time and money if this
: isn't right. The rail is in
: excellent condition. i would want
: 50.00 plus shipping. I can send
: pictures if you would like.
:
: Tony
: --Previous Message--
:
:
: --Previous Message--
: I have on side from a 1962 wagon. I
: know that it is a little longer than
: the convertible. If you are
: inteested I will measure and compare
: dimensions of my convertible and let
: you. I parted a car out a few years
: ago and saved because it was so
: clean and rust free.
: Tony D
:
: --Previous Message--
: I am looking for frame rear rails
: for
: a 63 falcon convertible does anyone
: know where i can get them
:
:
:Yes Tony if you like to measure them
: and let me know and how much you
: want for them
:
:
:
:
Message Thread:
« Back to thread