Posted by retyler
on 11/23/2007, 7:24 pm, in reply to "Re: Falcon Seat /Tire Question"
208.103.180.15
I have the later model Escort seats. I picked them because the backs flip forward even though they came out of a 4dr car. They have removal head rest. They are much more comfortable than the originals, but are close in appearance. I had them covered,along with the rear seat, locally to match original but in velor. Don't like vinyl. They weren't that hard to install.
I have 225X60X15 tires on 15X7 wheels with a 3.75 inch back set on the front. On the rear I have 235X60X15 on 15X7 wheels with a 4.5 inch back set. I am pleased with this setup.
Go to fordmuscle.com and register. There is a great Falcon forum on there and you will find a lot of good information. tell them retyler sent you. LOL BTW there is no such thing as Sh@t block Cheby in a Ford on that site.
Good Luck
--Previous Message--
: With the stock fender well 205X14 are
: about the biggest. However you can
: tub the fender wells up to the
: "frame" and mount 245X14
: tires. 15" wheels will also fit
: but sometimes the clearance on the
: front of the opening is real close.
: The small dodge pickup bench seat
: also fits quite well.
:
: --Previous Message--
: Anybody out there had any luck
: experimenting with different bench
: seat options (preferably with
: folding arm rest)for your 64-65
: Falcon? Also wondering what the
: largest wheel / tire combination
: (including offset)that anybody has
: sucessfully installed in a stock
: Falcon wheel well? I am removing
: leaf springs so I should pick up
: about 3 inches tire clearence on
: each side. Any help will be greatly
: appreciated.Thanks
:
:
:
Message Thread:
« Back to thread