Posted by don on 6/13/2007, 3:32 pm, in reply to "Generator to Alternator Conversion Bracket" --Previous Message--
72.208.158.9
Well I posted this in the wrong thread but here goes:
The tensioner bracket is available from various Mustang and Falcon suppliers. The mounting bracket to the block is another story.
Check the side of your block and look at the mounting setup. If I remember correctly, early blocks had the flange spread to accomodate the generator bracket whereas 65 and later had the hole closely spaced for the alternator. I actually have a combo bracket that someone possibly made by taking the old generator bracket and welding in another short piece for the alternator. This could be used for both applications using one bracket.
: Are these mounting brackets available
: anywhere? Or is it just something
: that need to be homemade?
:
Message Thread:
« Back to thread