Posted by don on 5/10/2007, 3:39 pm, in reply to "1960-removing lock cylinders" The lock is also attached to a rod inside of the door. You will need to remove your door panel and use a light to view. --Previous Message--
72.208.158.9
There is one fork clip on each door that holds the lock assembly in place. It is hidden behind your weather stripping on the side of your door. These can be a problem with corrosion over the years so you may need to use some WD 40 or similar. Grab ahold of the tab on the clip and rock back and forth while pulling out. This will take some time depending on the condition.
: I need to remove the lock cylinders on
: my 1960 Falcon so that I can take it
: in to have some keys made. How is
: this done on this car? Any help on
: this issue will be greatly
: appreciated!
:
Message Thread:
« Back to thread