Posted by Jeff on 3/28/2007, 7:11 pm, in reply to "Re: 64 disc brake conversion"
75.128.85.21
Thx for the help
--Previous Message--
: Yes, the '65-67 Mustang rotors and
: calipers will bolt right on to the
: V8 spindles. You can buy a
: changeover kit from Stainless Steel
: Brake Corp in New York that includes
: all the pieces you'll need including
: an adjustable proportioning valve.
: First class stuff.
:
: For a manual disc brake master
: cylinder use one from a manual disc
: Mustang II or Maverick - it will
: bolt right in if you use your
: original pushrod.
:
: The early Mustang brakes make a nice
: swap - no mods needed to the
: steering linkage or spindles, and
: the 4 piston calipers make for easy
: stopping without power assist. JL
:
: --Previous Message--
: I have a 64 Falcon v8 w/4 way drums.
: I
: want to switch it to front disc. Can
: I just order 65 mustang rotors and
: put them on my spindles? what about
: the calipers and mounting plates?
: Also waht master cylinder should I
: use? I just want manual brakes and I
: don't want to cut up the firewall.
: any help would be great thx
:
:
:
Message Thread:
« Back to thread