Posted by J B Long on 3/20/2007, 8:43 pm, in reply to "64 disc brake conversion" For a manual disc brake master cylinder use one from a manual disc Mustang II or Maverick - it will bolt right in if you use your original pushrod. The early Mustang brakes make a nice swap - no mods needed to the steering linkage or spindles, and the 4 piston calipers make for easy stopping without power assist. JL --Previous Message--
206.40.42.83
Yes, the '65-67 Mustang rotors and calipers will bolt right on to the V8 spindles. You can buy a changeover kit from Stainless Steel Brake Corp in New York that includes all the pieces you'll need including an adjustable proportioning valve. First class stuff.
: I have a 64 Falcon v8 w/4 way drums. I
: want to switch it to front disc. Can
: I just order 65 mustang rotors and
: put them on my spindles? what about
: the calipers and mounting plates?
: Also waht master cylinder should I
: use? I just want manual brakes and I
: don't want to cut up the firewall.
: any help would be great thx
:
Message Thread:
« Back to thread