Posted by Ashley on November 6, 2004, 6:46 am, in reply to "Re: Ultra 16 Imagineering pabx" --Previous Message--
In Australia, the NTS London 8 and 16 systems were known as the Ultra 8 and 16, and were distributed by Imagineering who later were absorbed into Telepacific. There was a larger system using one or two cabinets as required for 64 or 128 extensions that was supplied by Telecom Australia as the Telecom 9400 PABX. This was supported in Australia by Exicom Ltd, who went bankrupt and were liquidated in 1997.
: : --Previous Message--
: Hi all,
: I hope some one can help me with a programing
: manual for a Ultra 16 pabx built in the UK by
: Imagineering in the 1980's please.
: Kind Regards
: Anthony
: anthony4acre@hotmail.com
:
: :Since checking the net for data on the Ultra
: 16 I have found out that this PABX was also
: sold in the UK as the London 16. The original
: manufacture was National Telephone Systems in
: the UK & STC ( Standard Telephones &
: Cables) were also involved with the larger
: systems. there were also other models called
: London 8,32 & 64. I have found a site
: that is dedicated to programing old
: PABX'including this one.
: I have found a picture of the inside of a
: London 8 PABX the other 4 models use the same
: trunk & extention circuit cards as the
: ones shown in the Ultra 8.
:
:
Message Thread:
« Back to thread