Posted by Alan on October 12, 2004, 6:45 am, in reply to "Philips SBX18 pabx" --Previous Message--
can you post some on this site?
http://groups.msn.com/PhilipsMicronetSBX12/_whatsnew.msnw
: I have a SBX 18 Series 2 installation &
: Mantenance manual this is the Australian
: version.
: I can email parts of the manual to anyone
: that request it.( The manual has no
: schematics or circuits )
: Common faults I have found with the system
: are: 1. noise on all extentions which turns
: out to be dried up electo's in the switching
: regulator in the main unit that produces all
: the system voltages.
: 1.I replaced capacitors around the heatsinks
: & other parts that run hot. I used 105deg
: C temp rated capacitors.
: 2. I had a problem also with one tant
: capacitor go short circuit on an exten &
: replaced it.
: The only problems the system has now is the
: plastic cases the system is starting to get
: real yellowish & brittle with old age.
: email anthony4acre@hotmail.com
:
:
:
Message Thread:
« Back to thread