Posted by Simon Burns on June 3, 2007, 10:36 pm, in reply to "Re: Philips SBX18 pabx" --Previous Message--
: can you post some on this site?
:
: http://groups.msn.com/PhilipsMicronetSBX12/_whatsnew.msnw
:
: --Previous Message--
: I have a SBX 18 Series 2 installation &
: Mantenance manual this is the Australian
: version.
: I can email parts of the manual to anyone
: that request it.( The manual has no
: schematics or circuits )
: Common faults I have found with the system
: are: 1. noise on all extentions which turns
: out to be dried up electo's in the switching
: regulator in the main unit that produces all
: the system voltages.
: 1.I replaced capacitors around the heatsinks
: & other parts that run hot. I used
: 105deg
: C temp rated capacitors.
: 2. I had a problem also with one tant
: capacitor go short circuit on an exten &
: replaced it.
: The only problems the system has now is the
: plastic cases the system is starting to get
: real yellowish & brittle with old age.
: email anthony4acre@hotmail.com
:
:
:
:
:
Hi my name is Smon, we have a phillips sbx18 series 2 at work and recently experienced a power outage. Upon restoration, the system has lost its programming and we are back to default data. I am looking for programming instructions s as to put back categories for the stations involved. We are a little paralysed at present and would appreciate the help from anyone. Many thanks, Simon.0403009278 0398197365
Message Thread:
« Back to thread