Posted by simon on September 28, 2007, 8:01 pm, in reply to "P76 adaptors to ZF and 3.9EFI"
58.7.145.211

The manifold adapters are NOT angled the 2 bolt type are about 13mm thick and the second type are 25-30mm thick and are just spacers with slotted bolt holes to allow you to use 1 set of longer manifold bolts but people seem to have vacume leak problems with these but there was a guy in perth on the outerlimits forum who modified the 3.5 efi inlet manifold to bolt directly to the leyland. The adapter for the zf to leyland is just a copy of the rover crank spacer with a leyland bolt pattern the bellhousing will bolt straight up with no mods.