Posted by Hamish on September 13, 2007, 4:15 pm, in reply to "Re: What Lucas/Rover HEI Dizzy?? Never heard of one. N/M to RR. Sorry - long post!" Because I have never been able to make a Lucas dizzy work anywhere near water, I'm not going to fit another Lucas product. I've had botha standard points dizzy and a lumenition modified dizzy in it, and deep puddles are enough to cause either to misfire. Round here, landcruisers with Chev V8 & HEI seem to cope with water a metre or more deep with no hassles at all. So - after reading this... http://www.offroadexpress.co.nz/modules.php?name=Forums&file=viewtopic&p=818&highlight=#818 And a few other websites, plus talking to two local RR owners, I decided on the Chev HEI. Hamish
203.97.106.223
Thanks Max
--Previous Message--
: Have a look at the dizzy set up in any
: EFI rover...
:
: It is HEI ....
:
: It users a coil and a reluctor in the
: dizzy and a HEI module in that box
: below the coil.
:
: It is just a 4 pin HEI module that
: dosn't do retart on cranking. There is
: no reason why you could not use any
: other of the HEI modules and just add
: the extra bits.
:
: The later dizzy used on the 3.9 with
: the HEI on the side has a different set
: of problems to the early, but it is
: still HEI...
:
: So why is the chevy so good .....
:
: Max
:
:
| 722 |