Posted by Ned on September 3, 2007, 12:55 pm, in reply to "looking for parts"
121.44.255.57

Wayne, The inlet hose from a Holden VX commodore is a pretty good size. It has different size each end and has a bend in it too. If the manifolds are only a mm or two out, you can take them to an engineering shop with a linisher. It's like a belt sander for metal. Ned --Previous Message-- : Hi guys I am looking for a pair of : exhaust manifold for a 3-9, as mine : have warped and the gasket won't take : up, also looking for a good second hand : hose that goes from the Airflow meter : to the Plenium chamber its a tapered : hose so an after market model won't go : on it , nor can you get one from a hose : specialist. : : any help in this would help. : : wayne : : :