Posted by Bitohoneylady on 10/8/2009, 8:49 am, in reply to "Can you give me info on the power winch?"
67.142.130.40

Here's some info from the manuel Ground flat pulling rate: 24000 lbs Installation MOUNTING The winch can be mounted on the trailer in the same position and location as an existing hand winch. After re mov ing the hand winch, bolt the Powerwinch unit using a min i mum of (2) 3/8” Grade 5 machine bolts and lock nuts. The Powerwinch Quick Mount Kit (P7700000AJ) is avail able from the dealer. The cable hook on the winch and the bow eye on the boat should be at the same height when the boat is in the fully loaded position on the trailer. If the bow eye is too high, extra pull is required of the winch and extra stress is exerted on the boat’s stern and bow eye. To achieve equal height of the winch and boat, raise or lower the winch stand. In most cases, the trailer man u fac tur er will have an adapter available for use with a winch.

 Post a Response