[ Post a Response | BAEN Barter Board ]
Posted by Bitohoneylady
on 10/8/2009, 8:49 am, in reply to "Can you give me info on the power winch?"
67.142.130.40
Here's some info from the manuel
Ground flat pulling rate: 24000 lbs
Installation
MOUNTING
The winch can be mounted on the
trailer in the same position and location
as an existing hand winch. After
re mov ing the hand winch, bolt the
Powerwinch unit using a min i mum of
(2) 3/8” Grade 5 machine bolts and lock
nuts. The Powerwinch Quick Mount Kit
(P7700000AJ) is avail able from the dealer.
The cable hook on the winch and the bow
eye on the boat should be at the same
height when the boat is in the fully loaded
position on the trailer. If the bow eye is
too high, extra pull is required of the winch
and extra stress is exerted on the boat’s
stern and bow eye.
To achieve equal height of the winch and
boat, raise or lower the winch stand. In
most cases, the trailer man u fac tur er will
have an adapter available for use with a
winch.
Responses:
