[ Post a Response | Airbrush Tattoos Message Board ]
Posted by MGDARTIST the sticky trigger is often a sign they need a more thorough cleaning as some errant paint may have leaked back into and down into the valve area, causing them to stick.
Link: mgdartist.com
on 7/5/2005, 7:12 am, in reply to "sticky trigger"
they sometimes need oil.
remove airhose, put a few drops of oil in bottom at the valve. (airbrush oil or 3in1 ive used without problems so far) you may also need some in the top hole at the trigger. then work it loose.
Responses: