[ Post a Response | The SteelNavy.Com Message Board ]
Every one I've built has been warped to buggery
Posted by Don Murphy on September 17, 2017, 10:10:50, in reply to "Not really"
For no real reason either. I removed the molded on railing and even those are different thicknesses depending. As I'm using Matty Models update sets, I knew I had to add shims anyway. The shimming hasn't been too bad. But yeah...its not a quick building process.
: Seems pretty straight but even if it were
: twisted that would not effect the fore-aft
: fit of the side inserts that don't match the
: horizontal contour of the hull or the fact
: that they are taller or shorter than the cut
: outs in the hull sides where they are
: supposed to fit.
SteelNavy.Com Home Page