The Gorilla PVA type supposedly has a higher initial tack. Since I live in Alabama I don't want a high initial tack for my wood glue as I need more time to adjust and clamp things so I have never tried the gorilla PVA.
: The maple syrup type which Ron identifies
: foams as it cures. It is used in
: woodworking for a good tight joint between
: two pieces of wood. The pieces MUST be
: clamped or otherwise secured or the foam
: will displace the two parts. Even then
: there is usually squeeze-out which must be
: cleaned up (chisel and/or acetone).
: The glue is water activated. You need to
: moisten one or both surfaces then apply the
: Gorilla also makes a super glue as well as a
: clear glue for glass surfaces.
: I would not recommend Gorilla wood glue for
: PE. I have also not recommended it for
: resin part assembly due to squeeze-out
: Often Gorilla glue has often been confused
: with Gator glue. The later is a PVA glue
: with quick grab features. Aleene's Tacky
: Glue or DecoArt Triple Thick Glue are craft
: store glues with similar features.