Put it in and let fluid dribble out of the line screws on the master to fill the void and let any air escape before tightening and sealing it up.
Had a pretty good pedal at this point amazingly but started bleeding the brakes anyways - crack right rear open attached rubber line and magic bottle, got in and started slowly pumping.
Checked after a few pumps and didnt see any air in the clear line so closed up bleeder removed hose and went to other side and did same thing.
Pedal was at the floor now... Thinking WTF HOW so attached rubber hose to right rear again and of course more air found but just let it gravity bleed for awhile. Went to other side and did the same thing.
Walla! pedal has returned! thinking im not gonna screw with it anymore till I figure out how to build a pressure bleeder so I can crack each corner and let fluid come out wherever the hell it wants as I close the bleeder...
Need to look into the weed sprayer setup or find a cheap regulator...
I have NEVER had this many issues trying to bleed frigging brakes on any other car.