Re: need some basic info
Proceedure as follows remove the screws on the top of the dash which you can see. the 2 screws one on each side of the pad.9open the doors. There are teo screws holding the pad above glove box. Open the door you will see 2 holes. remove radio bezel and the bezel light assay. remove the headlight bezel one screw be careful removing the pad as there are 2 metal clips that hold the pad in place. gently pull towards you. the screws have either phillps head or 7mm hex head. If your pad is bad and you need a replacement I have some. rd@chevette.biz
|