[ Post a Response | The Chevette Forum ]
Posted by Howard
on 9/14/2009, 9:13 pm
69.91.110.78
I removed the rear swaybar and axle mounts/tangs
for the bar from an '86 Isuzu Impulse.
This bar will mount on a Chevette rear end given
welding capability for the endlink tangs. The other brackets mount to flat square shaped spots
on the floor. I drilled holes though then mounted
using reinforcing plates on the other side. They
come through underneath rear seat cushion. Just to
let anyone interested know.
Howard
Message Thread:
« Back to thread