[ Post a Response | The Chevette Forum ]
Posted by Shawn
on 9/7/2009, 4:44 pm, in reply to "Re: Chevy Van Gauges for Chevette"
24.61.70.112
Jody,
You can leave the wire connected at the ignition switch, GM did from the factory on most older gauge equipped products with no ill ramifications. You will see the gauge peg full hot while cranking.
For the sender, get the one for the van for both temperature and oil pressure and you should be OK.
Good luck.
-Shawn
Message Thread:
« Back to thread