 |
|
Posted by Ste I too am having the same problems. I too feel like pulling my hair out. I bought all this gear and wanted to use the RM1x to sequence tracks from my external gear. I've midi daisy-chained all my external synths together and it seems every day I have new problems. Programs change, banks reset, modulation wheels stop functioning, notes drop from chords (even though maximum polyphony hasn't been reached). Turning the RM1x off and therefore breaking the midi chain...and the problems stop. My creativity has taken a nose-dive because I've had to sort out all the technical problems by going online or reading the manuals. Would using a patch bay sort out any of the problems? I used to use Cubase and had a USB patch bay which was a breeze to use, and I NEVER had a problem. Can I get one for just hardware (there's no computer in my setup). If it would help me in this situation, where could I get one? Any help would be appreciated. Ste. --Previous Message--
on May 27, 2005, 3:49 am, in reply to "Re: Sequencing a Roland SH32 with my RM1x!"
80.177.117.50
Hi,
: Hi MDee, cheers for your help, I have tried this i must admit
: (plus a few other things) and now it 'seems' to have stopped
: sending reset messages when i press record, but still does it
: when i exit the utility menu?
:
: I checked the software version and its 1.02 so i reckon it may
: be related to that, but tbh i can cope as long as i remember to
: save any sounds i like.
:
: The Yamaha does seem to 'change' each time i use it though
: (different quirks etc) are they quite robust or are they know to
: have problems in later life? (it looks to have been quite well
: looked after btw).
:
: Simon
:
: --Previous Message--
: At first the RM1x can appear to do strange preset changes to
: external midi equip. The solution is to get rid of the
: "phrase" term in the bank section of voice mode &
: this should stop it.
:
:
:
: --Previous Message--
: Hi, i'm new to the rm1x scene having just picked up a 2nd hand
: one.
: My primary use was to sequence my Roland SH32 which is working
: well. I.e i can play sounds through the yamaha, record etc!
: However, when i exit the utility menu or press record or back,
: the sequencer sends a signal to the sh32 and the display of the
: sh32 changes from for example A11 to --- and no noise is heard
: until i manually change pattern on my sh32 where all my preset
: sounds are lost unless i've written them beforehand!
:
: I've tried to stop the yamaha sending any midi messages via the
: utility & set up menus but the problem persists! I've also
: played with the local settings on the sh32 eg turn off or mid1
: or mid2 but again the problem persists! Has anyone any idea
: whats happening here?
:
: Does the yamaha clash with the Roland? Please, please advise of
: any tips cause i'm pulling my hair out here!!!
:
: Simon
:
:
:
:
:
Message Thread:
« Back to thread
|