[ FYI FORD - MustangSteve's Ford Mustang Forum ]
If you wish to contribute to support this site, email mustangsteve66@yahoo.com
REMEMBER!!! When posting a question about your Mustang or other Ford on this FORD MUSTANG FORUM, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.
- 4 to 5 lug swap
Posted by Clay Smith   on 10/21/2009, 8:21 am
173.16.49.113|
I have a 66 mustang with a 200 6 cyl. all factory. I am wanting to change the rear axles out so they are five lug. Wondering what axle will fit in my rear end. It is stock and not an 8" or a 9" it's small and rear loading. Any help would be appreciated.
|
Post an Intelligent Response
|
- Re: 4 to 5 lug swap
Posted by josh on 10/21/2009, 8:52 am, in reply to "4 to 5 lug swap"
132.13.10.26
Clay
Best bet is to locate a complete 5 lug rear from a 65 or 66 as it bolts up fine. There are other years that fit and i suggest you do a search of the archives here. Others more knowledgeable will also add posts with additional info.
Why are you wanting to swap? If it's because you are converting to a V-8, you must upgrade your front suspension as well.
If you reply, update your post describing your complete upgrade intentions and where you are located.
Hope this helps.
|
Post an Intelligent Response
|
- Re: 4 to 5 lug swap
Posted by Clay Smith on 10/21/2009, 9:22 am, in reply to "Re: 4 to 5 lug swap"
173.16.49.113|
my goal is to upgrade the brake system with power brakes and front disc brakes. also to open up more wheel options. No V-8 at this time. I live in Oak Grove, KY. Thanks again
|
Post an Intelligent Response
|
[ FYI FORD - MustangSteve's Ford Mustang Forum ]
REMEMBER!!! When posting a question about your Mustang or other Ford on this FORD MUSTANG FORUM, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.
