FYI FORD - MustangSteve's Ford Mustang Forum: I start with separating................

[ Post an Intelligent Response | FYI FORD - MustangSteve's Ford Mustang Forum ]

If you wish to contribute to support this site, email mustangsteve66@yahoo.com REMEMBER!!! When posting a question about your Mustang or other Ford on this FORD MUSTANG FORUM, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.

I start with separating................

Posted by Mustsed on 11/1/2009, 9:07 am, in reply to "Re: They should ..................."
85.110.241.121

the balljoint from the spindel first then remove it from the UCA by unbolting the 4 bolts.

Never tried it the other way but when the balljoint starts turning with the nut, you will have a place to hold it with a prybar when still attached on the UCA.

If all this is on a fully loaded UCA with everything still attached to it, then you will have to place a support between the framerail bottom lip and the UCA channel right behind the balljoint See pic).

Hope that helps.

Mustsed

Nothing is impossible, some just cost more!!!

www.mustsed.com

Message Thread:

Upper Ball Joints - Billkubi 10/31/2009, 9:24 pm
- They should ................... - Mustsed 11/1/2009, 1:19 am
  - Re: They should ................... - Billkubi 11/1/2009, 8:47 am
    - I start with separating................ - Mustsed 11/1/2009, 9:07 am
      - Re: I start with separating................ - Billkubi 11/1/2009, 10:06 am
      - Re: I start with separating................ - Billkubi 11/1/2009, 12:25 pm
    - Do it in this order... - MustangSteve 11/1/2009, 11:50 am
      - Re: Do it in this order... - Billkubi 11/1/2009, 12:18 pm
        
        Re: Do it in this order... - MustangSteve 11/1/2009, 4:40 pm
        
        Re: Do it in this order... - Billkubi 11/1/2009, 5:27 pm
        
        Re: Do it in this order... - Billkubi 11/2/2009, 8:40 am
« Back to thread

Post an Intelligent Response

Your Name:
Your Email:

Mustang Related Subject:

Message:

Post PIC: (URL from internet hosted picture)

Optional Link Title: (all links require a title)
Mustang Site Link URL: ALSO MUST ENTER TITLE

Notify me by email of all message replies.

By posting, you confirm that you have read and agreed to be bound by the board's usage terms.

REMEMBER!!! When posting a question about your Mustang or other Ford on this FORD MUSTANG FORUM, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.