[ Post an Intelligent Response | FYI FORD - MustangSteve's Ford Mustang Forum ]
If you wish to contribute to support this site, email mustangsteve66@yahoo.com REMEMBER!!! When posting a question about your Mustang or other Ford on this FORD MUSTANG FORUM, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.
Posted by Mustsed
www.mustsed.com
on 10/20/2009, 11:26 pm, in reply to "Re: KICK DOWN CABLE 68 mustang"
85.110.234.178 | Message modified by user mustsed 10/20/2009, 11:42 pm
on this setup and that is the one on the accelerator lever end.
When going from the 2 hole side towards the lever side it will have to be;
- First hole for return spring on transmission
- Second hole goes on transmission lever pin and held in place by a ordinary "c" clip in proper size
- Nut with pin goes on the accelerator lever with the special clip which you can buy from any major parts vendor like MU;
http://www.mustangsunlimited.com/keyword.asp?Keywords=3611
Hope that helps
Mustsed 
Nothing is impossible, some just cost more!!!
Message Thread:
« Back to thread
REMEMBER!!! When posting a question about your Mustang or other Ford on this FORD MUSTANG FORUM, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.