[ Post your Mustang question | MustangSteve.com - click here ]

FYI FORD

MustangSteve's

Ford Mustang Forum

The Internet's Most Knowledgeable Classic Mustang Information

IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE

MustangSteve has over 30 years of Mustang experience, having owned 19 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify (Especially Modify) their Mustang....THERE ARE NO DUMB QUESTIONS!!!!!

Visit MustangSteve's web site to view some of my work and find details for:

FYIFORD Contributors' PICTURES

Power Brake Retrofit Kits for 65-66 Stangs

Classic Mustang FAQ's by MustangSteve

How to wire in a Duraspark Ignition

Mustang Ride Height Pictures and Descriptions

Steel Bushings to fit Granada Spindles to Mustang Tie Rods

BUY or SELL Mustangs and Parts on MustangSteve's SWAP MEET Page

Vist my EBAY store MustangSteve Performance

How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page

FYIFORD Acronyms for guide to all the acronyms used on this page

FYIFORD Important information and upcoming events

Map shows where all the contributors are located - ADD YOURS

MustangSteve's LAW of Automotive Repair and Restoration:

Any automotive repair or restoration will take twice as long and cost twice as much as originally planned, even after careful prior consideration of MustangSteve's LAW

You are not currently logged in.
Login:	Register To Post Messages on FYIFORD
Username:	Password:
Remember me for:

Users active in the last 15 minutes: 2PLUS2, ChrisH IA, F15Falcon, Opentracker, ernest, jerseyjoe 6 total.

Time 11/8/2009, 9:04 pm

Page:

1 2 3 4 5 6 7

Message Archive

Cutting Hurst shifter - Jim Bowie 9/29/2009, 8:53 pm
View all; 2 responses, latest posted 9/30/2009, 8:46 pm
- Re: Cutting Hurst shifter - MustangSteve 9/29/2009, 10:11 pm
  - Re: Cutting Hurst shifter - Jim Bowie 9/30/2009, 8:46 pm
  View all;
PRO 5.0 SHIFTER - MARK 9/30/2009, 7:12 pm
View all; 1 response, posted 9/30/2009, 8:42 pm
- Re: PRO 5.0 SHIFTER - Jim Bowie 9/30/2009, 8:42 pm
  View all;
F-100 progress! - MustangSteve 9/29/2009, 10:17 pm
View all; 8 responses, latest posted 9/30/2009, 7:13 pm
- Thats why IM your helper.. - Ramses 9/30/2009, 12:37 am
  - hummmmmmm - Don 9/30/2009, 8:11 am
- Re: F-100 progress! - Steve69 9/30/2009, 9:18 am
- Re: F-100 progress! - dablack 9/30/2009, 9:56 am
- Got any pictures of the column, I may be interested in it n/m - Daze 9/30/2009, 4:08 pm
  - Sent pics - MustangSteve 9/30/2009, 6:46 pm
  - Re: Got any pictures of the column, I may be interested in it n/m - Greg B 9/30/2009, 6:48 pm
    - I am leaning more towards the Mustang, but either could work well n/m - Daze 9/30/2009, 7:13 pm
  View all;
Rear Brakes Revisited - lowercasesteve 9/23/2009, 5:51 pm
View all; 4 responses, latest posted 9/30/2009, 4:28 pm
- My $.02..... - Al Newman 9/26/2009, 4:34 pm
  - Re: My $.02..... - lowercasesteve 9/28/2009, 1:40 pm
    - R U Sure?... - Al Newman 9/28/2009, 7:47 pm
      - Yes..... - lowercasesteve 9/30/2009, 4:28 pm
  View all;
No more Mustang Steve Radiators - Wes 9/29/2009, 11:54 pm
View all; 2 responses, latest posted 9/30/2009, 12:38 pm
- Re: No more Mustang Steve Radiators - Steve69 9/30/2009, 9:20 am
  - Virginia Classic Mustang has my radiators - MustangSteve 9/30/2009, 12:38 pm
  View all;
RTV...The miracle cure. - Bullet Bob 9/28/2009, 9:07 am
View all; 10 responses, latest posted 9/30/2009, 11:12 am
- Re: RTV...The miracle cure. - Steve69 9/28/2009, 9:42 am
- Re: RTV...The miracle cure. - Greg B 9/28/2009, 9:43 am
- Bullet Bob....you SURE you weren't on subs???..... - 6sally6 9/28/2009, 12:37 pm
  - Tooooooo funny Sal. No boats here.... - Bullet Bob 9/28/2009, 3:14 pm
- Re: RTV...The miracle cure. - Mach1_Ron 9/28/2009, 1:18 pm
  - Re: RTV...The miracle cure. - Lil' Hoss 9/28/2009, 3:40 pm
- It helps keep the aircraft pressurized - Ron68 9/28/2009, 7:54 pm
- Re: RTV...The miracle cure. - Steve69 9/30/2009, 9:21 am
- Bullet Bob...... - jerseyjoe 9/30/2009, 10:47 am
  - Naw, but good try Joe... - Bullet Bob 9/30/2009, 11:12 am
  View all;
New Mustang Mag - 68mustang 9/10/2009, 8:08 pm
View all; 12 responses, latest posted 9/30/2009, 8:50 am
- Methinks... - MustangSteve 9/10/2009, 8:18 pm
  - Ha, I even got a T-shirt in the mail last week....n/m - Toubo.....(Canadian spelling) 9/11/2009, 10:56 pm
    - Re: Ha, I even got a T-shirt in the mail last week....n/m - Lil' Hoss 9/11/2009, 11:15 pm
- Re: New Mustang Mag - Jim Bowie 9/10/2009, 8:24 pm
  - Re: New Mustang Mag????? - bruce n 9/11/2009, 3:07 am
    - Re: New Mustang Mag????? - gjz30075 9/11/2009, 6:56 am
      - Re: New Mustang Mag????? - Ted 9/11/2009, 5:12 pm
- Re: New Mustang Mag - Doug G 9/11/2009, 5:05 pm
- Re: New Mustang Mag - Brent 9/14/2009, 12:33 pm
  - Re: New Mustang Mag - 68mustang 9/14/2009, 11:22 pm
    - Re: New Mustang Mag - BrandonPatterson 9/30/2009, 8:24 am
      - Re: New Mustang Mag - ultrastang 9/30/2009, 8:50 am
  View all;
Thanks Ron68! The mag has arrived and... - Hakan 9/27/2009, 6:58 am
View all; 3 responses, latest posted 9/30/2009, 8:14 am
- Re: Thanks Ron68! The mag has arrived and... - Ron68 9/27/2009, 9:50 pm
  - Re: Thanks Ron68! The mag has arrived and... - Lil' Hoss 9/27/2009, 10:49 pm
    - Re: Thanks Ron68! The mag has arrived and... - Brandon 9/30/2009, 8:14 am
  View all;
DID I MENTION I LOVE DRIVING MY MUSTANG AS THE WEATHER IS COOLING DOWN - BILLY WALTON from GEORGIA 9/22/2009, 7:15 pm
View all; 7 responses, latest posted 9/30/2009, 5:53 am
- Re: DID I MENTION I LOVE DRIVING MY MUSTANG AS THE WEATHER IS COOLING DOWN - Rudi 9/22/2009, 7:17 pm
- You got water wings on that thing, BILLY? - MustangSteve 9/22/2009, 8:22 pm
- Re: DID I MENTION I LOVE DRIVING MY MUSTANG AS THE WEATHER IS COOLING DOWN - Jeff in GA 9/23/2009, 12:32 pm
- Re: DID I MENTION I LOVE DRIVING MY MUSTANG AS THE WEATHER IS COOLING DOWN - MTSteve 9/23/2009, 4:15 pm
  - Yeah BILLY, What MTSteve sez........ - 6sally6 9/23/2009, 9:55 pm
    - IT HAS BEEN IN THE 80'S YES LOTS OF RAIN ....I PUT SOME NEW BLADES ON THE WIPERS - BILLY WALTON from GEORGIA 9/24/2009, 7:18 pm
      - IT IS GETTIN COOL IN GEORGIA!!!!! YIPEEEE - BILLY WALTON from GEORGIA 9/30/2009, 5:53 am
  View all;
Rally pac clock shaft replace? - Chris Vadnais 9/26/2009, 3:33 pm
View all; 5 responses, latest posted 9/30/2009, 1:31 am
- Re: Rally pac clock shaft replace? - Ted 9/26/2009, 7:24 pm
  - Oval Industries - Greg B 9/26/2009, 7:42 pm
    - Re: Oval Industries - Chris Vadnais 9/26/2009, 11:49 pm
      - Re: Oval Industries - Greg B 9/27/2009, 12:15 am
        
        Re: Oval Industries - Chris Vadnais 9/30/2009, 1:31 am
  View all;
Which is the right Pitman Arm.... - Ramses 9/28/2009, 10:07 pm
View all; 10 responses, latest posted 9/30/2009, 12:34 am
- You got it right - stanger53 9/29/2009, 9:01 am
  - Re: You got it right - Ramses 9/29/2009, 1:52 pm
    - Re: You got it right - TimC 9/29/2009, 2:58 pm
      - I think I can Figure it out - Ramses 9/29/2009, 3:49 pm
        
        Pitman arm connects to steering drag link , aka center link - MarkinNJ 9/29/2009, 4:41 pm
        
        Re: Pitman arm connects to steering drag link , aka center link - Ramses 9/29/2009, 6:10 pm
        
        This is the center link I have... - Ramses 9/29/2009, 6:14 pm
        
        The center link you need... - MustangSteve 9/29/2009, 8:24 pm
        
        Thanks you guys.. - Ramses 9/30/2009, 12:34 am
        
        You have the wrong center link, thats for a later year - MarkinNJ 9/29/2009, 8:32 pm
  View all;
engine placement - Vern Lee 9/28/2009, 11:09 am
View all; 14 responses, latest posted 9/29/2009, 5:16 pm
- Vern-Vern-Vern-Vern-Vern!!!!!....... - 6sally6 9/28/2009, 12:15 pm
  - Re: Vern-Vern-Vern-Vern-Vern!!!!!....... - Vern Lee 9/28/2009, 12:27 pm
    - Re: Vern-Vern-Vern-Vern-Vern!!!!!....... - 6sally6 9/28/2009, 12:39 pm
      - Re: Vern-Vern-Vern-Vern-Vern!!!!!....... - Vern Lee 9/28/2009, 12:52 pm
        
        Re: Vern-Vern-Vern-Vern-Vern!!!!!....... - lowercasesteve 9/28/2009, 1:37 pm
        
        Re: Vern-Vern-Vern-Vern-Vern!!!!!....... - Vern Lee 9/28/2009, 2:07 pm
        
        Re: Vern-Vern-Vern-Vern-Vern!!!!!....... - Lil' Hoss 9/28/2009, 3:45 pm
- Sounds like you want to move the engine forward.... - Bullet Bob 9/28/2009, 4:05 pm
  - Re: Sounds like you want to move the engine forward.... - MustangSteve 9/28/2009, 5:17 pm
    - Re: Sounds like you want to move the engine forward.... - Vern Lee 9/29/2009, 6:39 am
      - The right engine tilt could be determined by .............. - Mustsed 9/29/2009, 12:22 pm
        
        Re: The right engine tilt could be determined by .............. - Vern Lee 9/29/2009, 12:37 pm
        
        One thing I always kept in mind.... - Bullet Bob 9/29/2009, 1:30 pm
        
        What Musted said... - MustangSteve 9/29/2009, 5:16 pm
  View all;
Motor Mounts - Billkubi 9/25/2009, 12:02 pm
View all; 5 responses, latest posted 9/29/2009, 5:09 pm
- One way.......I mean two ways....... - 6sally6 9/25/2009, 3:14 pm
  - Re: One way.......I mean two ways....... - Lil' Hoss 9/25/2009, 3:39 pm
    - Put one foot on the brake... REAL HARD - MustangSteve 9/25/2009, 8:12 pm
- Re: Motor Mounts is the left mount the same as the right? - Brent 9/29/2009, 3:47 pm
  - You WANT more vibration? - MustangSteve 9/29/2009, 5:09 pm
  View all;
Fuel injectors - hmartin025 9/29/2009, 2:28 pm
View all; 2 responses, latest posted 9/29/2009, 4:29 pm
- Re: Fuel injectors - TimC 9/29/2009, 2:50 pm
- If you clean them with something other than gas.... - Bullet Bob 9/29/2009, 4:29 pm
  View all;
My (Mustang parts runner) truck..... - 6sally6 9/28/2009, 7:03 pm
View all; 4 responses, latest posted 9/29/2009, 3:40 pm
- Re: My (Mustang parts runner) truck..... - TJ 9/28/2009, 7:10 pm
  - Re: My (Mustang parts runner) truck..... - MustangSteve 9/28/2009, 9:34 pm
- You'd have loss of bladder control! - josh 9/29/2009, 7:38 am
  - My bladder! is functioning REALLY well now......... - 6sally6 9/29/2009, 3:40 pm
  View all;
67/68 Fastback Ribbed Tail Light Finish Panel - Brent 9/16/2009, 2:32 pm
View all; 6 responses, latest posted 9/29/2009, 3:11 pm
- yep - Don 9/16/2009, 3:39 pm
  - Tail Light panel - Brian 9/24/2009, 5:44 pm
    - Re: Tail Light panel - PJ Moran 9/29/2009, 12:32 pm
  - Re: yep - Al Newman 9/26/2009, 4:20 pm
- Re: 67/68 Fastback Ribbed Tail Light Finish Panel - Brent 9/29/2009, 2:50 pm
- NPD Part Number is 40584 309 dollars eom - Brent 9/29/2009, 3:11 pm
  View all;
HOW MANY MILES DOSE YOU MUSTANG HAVE ON IT LIST YEAR MODEL AND MILAGE IN SUBJECT... - BILLY WALTON from GEORGIA 9/19/2009, 2:48 pm
View all; 27 responses, latest posted 9/29/2009, 1:41 pm
- 1966 COUPE....119,746....ORIGINAL OWNER SAID IT HAD JUST TURNED OVER - BILLY WALTON from GEORGIA 9/19/2009, 2:52 pm
- 1968 Coupe 262,457, Hasn't been driven last 3 years - 2PLUS2 9/19/2009, 3:49 pm
- Well lets see...1 trip 1875..+37 local miles, total this year=1917.. - Tubo 9/19/2009, 3:53 pm
  - I AM TALKING ABOUT TOTAL ORIGINAL MILES FROM THE DAY IT WAS MADE - BILLY WALTON from GEORGIA 9/19/2009, 4:07 pm
- Mine had 89,000 when I got it in 1985. - CraigMBA 9/19/2009, 4:32 pm
  - 1965 coupe with 193000, 293000, or more. Who knows. - CraigMBA 9/20/2009, 3:19 pm
- Re: HOW MANY MILES DOSE YOU MUSTANG HAVE ON IT LIST YEAR MODEL AND MILAGE IN SUBJECT... - Mr Secretary 9/19/2009, 6:33 pm
  - 1970 Sportsroof, 246,000 miles mostly mine. - Mr Secretary 9/19/2009, 6:35 pm
- 119201.6 '69 fastback - tim42 9/19/2009, 7:51 pm
- Re: HOW MANY MILES DOSE YOU MUSTANG HAVE ON IT LIST YEAR MODEL AND MILAGE IN SUBJECT... - TJ 9/19/2009, 7:57 pm
  - 1965 GT Coupe 57,000 original miles - 737IP 9/20/2009, 1:07 pm
    - Re: 1966 Coupe 51,000 miles"showing" - 6sally6 9/20/2009, 8:27 pm
- Re: HOW MANY MILES DOSE YOU MUSTANG HAVE ON IT LIST YEAR MODEL AND MILAGE IN SUBJECT... - gary 9/20/2009, 1:39 pm
- 1966 Coupe Absolutely No Idea - Jim Bowie 9/20/2009, 6:37 pm
  - 1966 Coupe - Pete M 9/20/2009, 7:57 pm
- Re: HOW MANY MILES DOSE YOU MUSTANG HAVE ON IT LIST YEAR MODEL AND MILAGE IN SUBJECT... - mark w 9/20/2009, 7:30 pm
  - 66 Coupe 93000 miles.... - TimC 9/20/2009, 8:31 pm
- 1966 Fastback 48,000 Miles since I built it in 1993 - MustangSteve 9/20/2009, 9:13 pm
- Re: HOW MANY MILES DOSE YOU MUSTANG HAVE ON IT LIST YEAR MODEL AND MILAGE IN SUBJECT... - Lil' Hoss 9/20/2009, 11:02 pm
- You don't want to know - lowercasesteve 9/21/2009, 3:59 am
- 66 Fastback 52K original miles 75 miles in last24 years - John 9/21/2009, 6:53 am
- 69 Fastback 57,238mi - Owen Francis 9/23/2009, 10:41 pm
- Re: 67 cougar xr7 432K miles 2 rebuilds - cougrnut 9/24/2009, 5:04 am
  - 2007 GT convertible 7500 miles - Loosenut 9/25/2009, 4:10 am
- 68 coupe - Total miles unknown - 6350 since major overhaul - - Ron68 9/27/2009, 9:59 pm
- 103,000 - Preston 9/29/2009, 8:00 am
- 66 Hardtop; 64305 on the clock; 5173 since rebuild June 2008. nm - Bullet Bob 9/29/2009, 1:41 pm
  View all;
posting pictures - 6568 9/29/2009, 1:36 am
View all; 1 response, posted 9/29/2009, 12:40 pm
- Re: posting pictures - MTSteve 9/29/2009, 12:40 pm
  View all;
surpentine & late model water pump - Preston 9/23/2009, 5:00 pm
View all; 8 responses, latest posted 9/29/2009, 12:05 am
- Re: surpentine & late model water pump - MustangSteve 9/23/2009, 8:26 pm
- Re: surpentine & late model water pump - BobN 9/24/2009, 9:08 am
  - got any pics, BobN?? - darren 9/24/2009, 1:54 pm
    - Re: got any pics, BobN?? - preston 9/24/2009, 2:08 pm
    - inprogress pic... - BobN 9/25/2009, 9:13 am
- Re: surpentine & late model water pump - JamesW 9/25/2009, 6:14 am
  - Serpentine & late model water pump w/PS - Tubo 9/25/2009, 8:37 am
    - Re: Serpentine & late model water pump w/PS - Superdave 9/29/2009, 12:05 am
  View all;
harmonic balancer timing marks - 65coop 9/28/2009, 7:23 pm
View all; 4 responses, latest posted 9/28/2009, 10:10 pm
- What is the question? - MustangSteve 9/28/2009, 9:32 pm
  - Re: What is the question? - 65coop 9/28/2009, 9:46 pm
    - I would "go by"....... - 6sally6 9/28/2009, 10:10 pm
- Re: harmonic balancer timing marks - mark w 9/28/2009, 9:51 pm
  View all;
uca shims - Jimmy G 9/24/2009, 5:29 pm
View all; 5 responses, latest posted 9/28/2009, 9:12 pm
- Re: uca shims - FASFRED 9/25/2009, 9:24 pm
- Re: uca shims - FASFRED 9/25/2009, 9:33 pm
- Re: uca shims - FASFRED 9/26/2009, 11:24 am
  - Re: uca shims - kurts65coupe 9/26/2009, 12:59 pm
- Re: uca shims - Jimmy G 9/28/2009, 9:12 pm
  View all;
Hey Infected Mushroom! - Hakan 9/28/2009, 1:59 pm
View all; 1 response, posted 9/28/2009, 7:56 pm
- Great idea! - Ron68 9/28/2009, 7:56 pm
  View all;
Door Skins - TJ 9/24/2009, 6:25 pm
View all; 5 responses, latest posted 9/28/2009, 6:23 pm
- Re: Door Skins - MustangSteve 9/24/2009, 7:21 pm
  - Re: Door Skins - Ramses 9/26/2009, 10:25 pm
    - Re: Door Skins - TJ 9/27/2009, 10:28 am
      - I've got a pair of skins for sale now, check swap page - DC 9/27/2009, 8:00 pm
        
        Dang it I have a 69! - TJ 9/28/2009, 6:23 pm
  View all;
power steering hoses - 1fststang 9/28/2009, 10:25 am
View all; 1 response, posted 9/28/2009, 5:16 pm
- Re: power steering hoses - Dan Wilcox 9/28/2009, 5:16 pm
  View all;
Passenger floor pan in - matts67coupe 9/27/2009, 10:38 pm
View all; 6 responses, latest posted 9/28/2009, 4:45 pm
- Re: Passenger floor pan in - hmartin025 9/28/2009, 8:07 am
- Good for you Matt, I'm encouraged... - Bullet Bob 9/28/2009, 8:48 am
  - Re: Good for you Matt, I'm encouraged... - Dave K 9/28/2009, 10:27 am
    - way to go Matt - Ted 9/28/2009, 12:10 pm
- WOOOOO-WEEE!!! That boy's a welder!!! - 6sally6 9/28/2009, 12:20 pm
- Great Job!! - MTSteve 9/28/2009, 4:45 pm
  View all;
EFI donor? - Rudi 9/22/2009, 11:44 am
View all; 17 responses, latest posted 9/28/2009, 12:40 pm
- Re: EFI donor? - TimC 9/22/2009, 11:59 am
- Re: EFI donor? - Tubo 9/22/2009, 12:02 pm
  - Re: EFI donor? - Rudi 9/22/2009, 1:11 pm
    - Honestly - Tubo 9/22/2009, 1:33 pm
      - Re: Honestly - Rudi 9/22/2009, 2:06 pm
        
        Re: Honestly - TimC 9/22/2009, 4:10 pm
        
        Once carb is set like that, it will remain trouble-free - MustangSteve 9/22/2009, 7:35 pm
        
        Unless it's a Holley - Tubo 9/22/2009, 8:14 pm
        
        Mine is a Holley... - MustangSteve 9/22/2009, 9:36 pm
        
        Here ya go..... - Al Newman 9/26/2009, 4:51 pm
        
        Re: Here ya go..... - Rudi 9/28/2009, 12:40 pm
      - Re: Honestly - Bullet Bob 9/22/2009, 10:37 pm
- Re: EFI donor? - Bullet Bob 9/22/2009, 11:08 pm
  - Re: EFI donor? - steve69 9/23/2009, 9:19 am
    - Thank you Steve butt like I said in another post.... - Bullet Bob 9/23/2009, 12:10 pm
      - Ya'know Bullet Bob......... - 6sally6 9/27/2009, 8:35 pm
        
        Re: Ya'know Bullet Bob......... - Bullet Bob 9/27/2009, 10:03 pm
  View all;
Here are a few more pic's of the new paint. - Preston 9/27/2009, 7:08 pm
View all; 8 responses, latest posted 9/28/2009, 10:25 am
- Re: Here are a few more pic's of the new paint. - Pete M 9/27/2009, 7:19 pm
- Re: Here are a few more pic's of the new paint. - 65james 9/27/2009, 7:39 pm
  - Re: Here are a few more pic's of the new paint. - Preston 9/28/2009, 10:04 am
- Very Nice - MTSteve 9/27/2009, 7:43 pm
  - Re: Very Nice - Preston 9/28/2009, 10:06 am
    - Re: Very Nice - Dave K 9/28/2009, 10:25 am
- panel fit looks fantastic. - darren 9/27/2009, 7:48 pm
- Preston - ricks_rod_shop 9/27/2009, 9:52 pm
  View all;
331 help? - dandog 9/27/2009, 12:54 pm
View all; 3 responses, latest posted 9/28/2009, 8:32 am
- Uuh Ooo! - Tubo 9/27/2009, 4:21 pm
  - Re: Uuh Ooo! too! - 6sally6 9/27/2009, 8:14 pm
    - Time for... - Al Newman 9/28/2009, 8:32 am
  View all;
Painting in side of truck lid. - Ted 9/25/2009, 10:37 am
View all; 10 responses, latest posted 9/28/2009, 7:40 am
- Re: Painting in side of truck lid. - Elvis 9/25/2009, 11:05 am
  - Re: Painting in side of truck lid. - Ted 9/25/2009, 12:32 pm
    - Re: Painting in side of truck lid. - Elvis 9/25/2009, 1:31 pm
      - If you paint inside of a TRUCK its gonna get "stuffy"!!!.... - 6sally6 9/25/2009, 2:42 pm
        
        Found another surprise on my trunk lid - Ted 9/25/2009, 2:56 pm
        
        Hey Elvis - Ted 9/25/2009, 3:02 pm
        
        Re: Found another surprise on my trunk lid - 6sally6 9/25/2009, 3:09 pm
        
        Re: Found another surprise on my trunk lid - Ted 9/25/2009, 6:02 pm
        
        IF it is a 65-68, find another lid - MustangSteve 9/25/2009, 7:49 pm
        
        Re: Found another surprise on my trunk lid - Lstar 9/28/2009, 7:40 am
  View all;
Route 66 Festival; Springfield IL - Rey 9/23/2009, 12:04 am
View all; 4 responses, latest posted 9/28/2009, 6:59 am
- Re: Route 66 Festival; Springfield IL - Brent 9/23/2009, 8:48 am
- Re: Route 66 Festival; Springfield IL - T.McG/393 9/23/2009, 8:38 pm
- Re: Route 66 Festival; Springfield IL - Rey 9/27/2009, 11:38 pm
  - Re: Route 66 Festival; Springfield IL - T.McG/393 9/28/2009, 6:59 am
  View all;
Great Day! Paint - Have pics NO DIAL UP - PRESTON 9/27/2009, 2:49 am
View all; 11 responses, latest posted 9/27/2009, 10:34 pm
- Re: Great Day! Paint - Have pics NO DIAL UP - Loosenut 9/27/2009, 5:58 am
- Beautiful.....Love the ghost stripes, and the color combo - MarkinNJ 9/27/2009, 6:20 am
- Re: Great Day! Paint - Have pics NO DIAL UP - Terry M 9/27/2009, 6:49 am
- Preston, could you keep a list of the order you take in reassembly? - MarkinNJ 9/27/2009, 6:59 am
- Re: Great Day! Paint - Have pics NO DIAL UP - Steve69 9/27/2009, 7:45 am
- Can't wait to show these pix to Jean... - Bullet Bob 9/27/2009, 7:54 am
  - Re: Can't wait to show these pix to Jean... - Preston 9/27/2009, 6:54 pm
    - Thanks for the color Preston... - Bullet Bob 9/27/2009, 10:34 pm
- Fantastic! Color, Ghost Stripes..& Ya gotta good hood too. - Tubo 9/27/2009, 9:14 am
  - Re: Fantastic! Color, Ghost Stripes..& Ya gotta good hood too. - Preston 9/27/2009, 6:58 pm
- WOW! - MustangSteve 9/27/2009, 9:27 am
  View all;
67 convertible mustang top frame - MLR67STANG 9/27/2009, 12:50 am
View all; 4 responses, latest posted 9/27/2009, 6:43 pm
- Re: 67 convertible mustang top frame - MLR67STANG 9/27/2009, 1:48 pm
- Re: 67 convertible mustang top frame - Rudi 9/27/2009, 2:48 pm
  - Re: 67 convertible mustang top frame - MLR67STANG 9/27/2009, 6:02 pm
    - Re: 67 convertible mustang top frame - Rudi 9/27/2009, 6:43 pm
  View all;
Bullet wheels with wider axle - O 9/24/2009, 8:55 pm
View all; 6 responses, latest posted 9/27/2009, 9:32 am
- Re: Bullet wheels with wider axle - JOHNATHAN 9/24/2009, 9:38 pm
  - Re: Bullet wheels with wider axle - MustangSteve 9/24/2009, 10:19 pm
    - Re: Bullet wheels with wider axle - O 9/26/2009, 7:43 pm
      - Re: Bullet wheels with wider axle - MustangSteve 9/26/2009, 9:58 pm
        
        Re: Bullet wheels with wider axle - O 9/26/2009, 10:32 pm
        
        Re: Bullet wheels with wider axle - MustangSteve 9/27/2009, 9:32 am
  View all;
Power brakes on 67 Mustang - Tim 9/27/2009, 3:00 am
View all; 1 response, posted 9/27/2009, 9:30 am
- Re: Power brakes on 67 Mustang - MustangSteve 9/27/2009, 9:30 am
  View all;
Steve ? "...CALENDAR PICTURES READY..." - Don 9/25/2009, 7:35 am
View all; 14 responses, latest posted 9/27/2009, 9:10 am
- Could have a pic of.......... - 6sally6 9/25/2009, 2:51 pm
  - Anything goes... MustangSteve annual calendar project. - MustangSteve 9/25/2009, 8:01 pm
    - Example of a good picture... - MustangSteve 9/25/2009, 8:11 pm
    - Re: Anything goes... MustangSteve annual calendar project. - ultrastang 9/25/2009, 8:39 pm
      - Only YOU can finish it, ultra... - MustangSteve 9/26/2009, 9:49 am
        
        Re: Only YOU can finish it, ultra... - ultrastang 9/26/2009, 11:36 am
        
        Action shots ARE encouraged! - MustangSteve 9/26/2009, 3:05 pm
        
        lol... n/m - Ramses 9/26/2009, 10:18 pm
- Re: Steve ? "...CALENDAR PICTURES READY..." - dodgestang 9/26/2009, 1:46 pm
  - 2nd pic is great. - darren 9/26/2009, 3:02 pm
    - Re: 2nd pic is great. - ultrastang 9/26/2009, 5:17 pm
      - an optimist would have a car half done - darren 9/26/2009, 6:57 pm
        
        Re: an optimist would have a car half done - ultrastang 9/27/2009, 9:10 am
    - Re: 2nd pic is great. - dodgestang 9/26/2009, 7:19 pm
  View all;
Hey, Loosenut, I finally got the top fixed on the 07 convertible - MustangSteve 9/26/2009, 10:27 am
View all; 3 responses, latest posted 9/27/2009, 5:54 am
- Re: Hey, Loosenut, I finally got the top fixed on the 07 convertible - Bullet Bob 9/26/2009, 1:47 pm
- Re: Hey, Loosenut, I finally got the top fixed on the 07 convertible - Greg B 9/26/2009, 2:48 pm
- Re: Hey, Loosenut, I finally got the top fixed on the 07 convertible - Loosenut 9/27/2009, 5:54 am
  View all;
Well, now I know where 192 degrees is.... - Bullet Bob 9/26/2009, 7:16 pm
0 responses
hydraulic clutch brkt. - etc. - ol'hoss 9/24/2009, 1:38 pm
View all; 2 responses, latest posted 9/26/2009, 6:23 pm
- Re: hydraulic clutch brkt. - etc. - Glen's 1965 5.0 9/25/2009, 6:47 am
  - Re: hydraulic clutch brkt. - etc. - ol'hoss 9/26/2009, 6:23 pm
  View all;
t5 - 351c 9/21/2009, 9:23 am
View all; 5 responses, latest posted 9/26/2009, 2:52 pm
- Re: t5 - Lil' Hoss 9/21/2009, 9:57 am
- Re: t5 - lowercasesteve 9/21/2009, 1:15 pm
  - My T5 is behind a weak 10psi turbo 2.3 - Phil 9/21/2009, 3:38 pm
- Re: t5 - Glen's 1965 5.0 9/21/2009, 8:43 pm
- Re: t5 - ponyboy 9/26/2009, 2:52 pm
  View all;
Electric Fan Clearance Question (sorry MS) - FriscoSteve 9/22/2009, 7:29 pm
View all; 14 responses, latest posted 9/26/2009, 1:32 pm
- Re: Electric Fan Clearance Question (sorry MS) - MustangSteve 9/22/2009, 8:04 pm
  - Re: Electric Fan Clearance Question (sorry MS) - 6sally6 9/22/2009, 9:07 pm
    - Re: Electric Fan Clearance Question (sorry MS) - Ron 9/22/2009, 11:15 pm
      - Picture of my SPAL install - CraigMBA 9/22/2009, 11:21 pm
    - check my mounting - Ted 9/23/2009, 9:29 am
  - Re: Electric Fan Clearance Question (sorry MS) - steve69 9/23/2009, 9:09 am
    - Re: Electric Fan Clearance Question (sorry MS) - 6sally6 9/23/2009, 9:21 am
      - Re: Electric Fan Clearance Question (sorry MS) - FriscoSteve 9/23/2009, 10:09 am
        
        Re: Electric Fan Clearance Question (sorry MS) - hmartin025 9/23/2009, 10:21 am
        
        Re: Electric Fan Clearance Question (sorry MS) - FriscoSteve 9/23/2009, 10:36 am
        
        Buy/steal/build/make...a proper shroud with that flex fan & you'll be happy. nm - Bullet Bob 9/23/2009, 11:16 am
        
        Offset fan to get more clearence! - DC 9/25/2009, 8:28 am
        
        That is a great idea, DC. - Bullet Bob 9/25/2009, 8:58 am
- I would hate to ....................... - Mustsed 9/26/2009, 1:32 pm
  View all;
door glass how to replace?? - Dave K 9/25/2009, 6:22 pm
View all; 2 responses, latest posted 9/26/2009, 11:08 am
- Re: door glass how to replace?? - MustangSteve 9/26/2009, 9:52 am
  - Re: door glass how to replace?? - Dave K 9/26/2009, 11:08 am
  View all;
Engine change over - arcticlighting 9/26/2009, 10:10 am
View all; 2 responses, latest posted 9/26/2009, 11:05 am
- Re: Engine change over - MustangSteve 9/26/2009, 10:28 am
- Re: Engine change over - Lil' Hoss 9/26/2009, 11:05 am
  View all;
I am happy to report my daughters surgury was 100% sucessfull - Greg B 9/25/2009, 10:16 am
View all; 7 responses, latest posted 9/26/2009, 10:08 am
- Re: I am happy to report my daughters surgury was 100% sucessfull - Bullet Bob 9/25/2009, 10:21 am
  - Re: I am happy to report my daughters surgury was 100% sucessfull - hmartin025 9/25/2009, 10:46 am
    - I have four baby teeth still in my head - CraigMBA 9/25/2009, 4:03 pm
      - Re: I have four baby teeth still in my head - FriscoSteve 9/25/2009, 4:22 pm
        
        Kids are amazingly resilient - MustangSteve 9/25/2009, 8:15 pm
- Re: I am happy to report my daughters surgury was 100% sucessfull - MarkinNJ 9/25/2009, 10:23 pm
  - God gives us kids as tests of our faith. - Loosenut 9/26/2009, 10:08 am
  View all;
1967 Mustang - Rick Johnson 9/23/2009, 6:15 pm
View all; 7 responses, latest posted 9/26/2009, 10:01 am
- Re: 1967 Mustang - TimC 9/23/2009, 6:29 pm
  - Actually... - MustangSteve 9/24/2009, 7:29 pm
- An 8.8 out of a Fox body is just right fer a 1967 Mustang - Tubo 9/24/2009, 8:18 pm
  - Re: An 8.8 out of a Fox body is just right fer a 1967 Mustang - ultrastang 9/25/2009, 9:02 pm
    - How come all the Fox body forums say short side?? - Tubo 9/25/2009, 9:47 pm
      - Re: How come all the Fox body forums say short side?? - ultrastang 9/26/2009, 6:58 am
        
        Alles Klar, - Tubo 9/26/2009, 10:01 am
  View all;
A fine Texas Howdy Do! - Stangster 9/25/2009, 4:24 pm
View all; 8 responses, latest posted 9/26/2009, 9:43 am
- Re: A fine Texas Howdy Do! - FriscoSteve 9/25/2009, 5:32 pm
  - Re: A fine Texas Howdy Do! - Ted 9/25/2009, 5:51 pm
    - I live in SoCal and I don't even lock my front door - CraigMBA 9/25/2009, 7:47 pm
      - Sorry you got a bad Texas welcome - MustangSteve 9/25/2009, 7:51 pm
- You're in Texas - Phil 9/25/2009, 8:52 pm
- Go to LIFELOCK and have them watch your credit - MarkinNJ 9/25/2009, 10:17 pm
  - Re: Thanks for the recommendations guys - Stangster 9/26/2009, 8:37 am
    - It's OK in TEXAS... - MustangSteve 9/26/2009, 9:43 am
  View all;
Oil Pressure - George Pezzolo 9/21/2009, 8:36 am
View all; 21 responses, latest posted 9/26/2009, 12:20 am
- Re: Oil Pressure - 6sally6 9/21/2009, 9:14 am
  - 25 lbs on the drill don't sound too good to me... - Bullet Bob 9/21/2009, 9:21 am
    - Re: 25 lbs on the drill don't sound too good to me... - hmartin025 9/21/2009, 12:31 pm
      - Re: 25 lbs on the drill don't sound too good to me... - Kristang 9/21/2009, 1:10 pm
        
        Re: 25 lbs on the drill don't sound too good to me... - ultrastang 9/21/2009, 1:25 pm
        
        Re: 25 lbs on the drill don't sound too good to me... - George Pezzolo 9/21/2009, 2:35 pm
        
        Re: 25 lbs on the drill don't sound too good to me... - Al Newman 9/21/2009, 5:24 pm
        
        Hey Al......... - 6sally6 9/21/2009, 7:09 pm
        
        Probably.... - Al Newman 9/22/2009, 5:57 am
        
        Al...that explains how...... - Bullet Bob 9/22/2009, 8:05 am
        
        Re: 25 lbs on the drill don't sound too good to me... - George Pezzolo 9/22/2009, 8:35 am
        
        Rockers..... - Al Newman 9/22/2009, 10:00 am
        
        Re: Rockers..... - George Pezzolo 9/22/2009, 2:43 pm
- Re: Oil Pressure - fasfred 9/22/2009, 11:39 am
- Re: Oil Pressure - George Pezzolo 9/23/2009, 11:19 pm
  - Ya know, George.... - Al Newman 9/24/2009, 6:25 am
    - Al, now if - Don 9/24/2009, 8:29 am
      - Proper Break-in oil - Kristang 9/24/2009, 9:15 am
        
        WAY TO GO AL!!! - MustangSteve 9/24/2009, 7:27 pm
    - Al, George and all - hmartin025 9/24/2009, 10:29 am
      - Re: Al, George and all - George Pezzolo 9/26/2009, 12:20 am
  View all;
Hipo exhaust manifold - whos fit? - WI Jeff 9/25/2009, 9:58 am
View all; 3 responses, latest posted 9/25/2009, 8:06 pm
- Disregard this, nm - Bullet Bob 9/25/2009, 10:06 am
- I used a set from NPD, item # 9430-1-1A.... - Bullet Bob 9/25/2009, 10:11 am
  - Sweet looking engine, Bullet.. - MustangSteve 9/25/2009, 8:06 pm
  View all;
Talking green - Ivy Green that is. - WI Jeff 9/25/2009, 10:14 am
View all; 1 response, posted 9/25/2009, 12:48 pm
- Re: Talking green - Ivy Green that is. - T.McG/393 9/25/2009, 12:48 pm
  View all;
Another Snag,, Radiator Shroud this time - Billkubi 9/24/2009, 6:44 pm
View all; 7 responses, latest posted 9/25/2009, 12:01 pm
- Re: Another Snag,, Radiator Shroud this time - zakdaddy99 9/24/2009, 6:58 pm
- What year car, what engine, what radiator, what shroud? - MustangSteve 9/24/2009, 7:14 pm
  - Re: What year car, what engine, what radiator, what shroud? - Billkubi 9/24/2009, 7:54 pm
    - Re: What year car, what engine, what radiator, what shroud? - cugman 9/24/2009, 8:24 pm
      - Re: What year car, what engine, what radiator, what shroud? - MustangSteve 9/24/2009, 10:22 pm
        
        Re: What year car, what engine, what radiator, what shroud? - Billkubi 9/25/2009, 7:28 am
      - Re: What year car, what engine, what radiator, what shroud? - Billkubi 9/25/2009, 12:01 pm
  View all;
I did my own front end alignment. - BobC 9/22/2009, 5:43 pm
View all; 27 responses, latest posted 9/25/2009, 9:43 am
- Re: I did my own front end alignment. - Steve57 9/22/2009, 6:46 pm
- Re: I did my own front end alignment. - Richard 9/22/2009, 6:48 pm
  - Re: I did my own front end alignment. - BobC 9/22/2009, 7:05 pm
- Re: I did my own front end alignment. - KeithP 9/22/2009, 7:06 pm
  - Re: I did my own front end alignment. - Ron 9/22/2009, 11:34 pm
    - Hey Ron - KeithP 9/23/2009, 9:26 am
      - Re: Hey Ron - Ron 9/23/2009, 12:07 pm
- Way to go BobC - MustangSteve 9/22/2009, 7:20 pm
  - Re: Way to go BobC - steve69 9/23/2009, 9:13 am
    - Re: Way to go BobC - KeithP 9/23/2009, 9:35 am
    - Re: Way to go BobC - Ron 9/23/2009, 12:34 pm
    - Re: Way to go BobC - BobC 9/23/2009, 12:52 pm
  - Re: Way to go BobC - BobC 9/23/2009, 12:50 pm
    - Re: Way to go BobC - hmartin025 9/23/2009, 1:23 pm
      - Re: Way to go BobC - steve69 9/23/2009, 4:03 pm
        
        Re: Way to go BobC - steve69 9/23/2009, 4:14 pm
        
        Re: Way to go BobC - BobC 9/23/2009, 4:42 pm
        
        I completely agree...loaner tool for Dallas? - FriscoSteve 9/23/2009, 4:54 pm
- Hey Daze - MTSteve 9/23/2009, 4:19 pm
  - It's a little less convenient...Butt (thanks Sal).... - Bullet Bob 9/23/2009, 4:33 pm
    - That looks like it would work just fine. - BobC 9/23/2009, 7:01 pm
      - I'll even make you a better deal... - Bullet Bob 9/23/2009, 7:44 pm
    - Re: It's a little less convenient...Butt (thanks Sal).... - steve69 9/24/2009, 9:47 am
      - No charge for use, Steve. Just take care of shipping... - Bullet Bob 9/24/2009, 11:35 am
- Re: I did my own front end alignment. - Lil' Hoss 9/24/2009, 11:34 am
  - You Tube videos on alignment - Ron 9/24/2009, 5:51 pm
    - Re: You Tube videos on alignment - steve69 9/25/2009, 9:43 am
  View all;
New Pony Pix - MTSteve 9/24/2009, 1:55 pm
View all; 11 responses, latest posted 9/25/2009, 9:22 am
- very nice, Steve. As I said once before...you and you Dad are very lucky. nm - Bullet Bob 9/24/2009, 3:02 pm
- Re: New Pony Pix - Mach1_Ron 9/24/2009, 3:16 pm
  - Re: New Pony Pix - steve69 9/25/2009, 9:22 am
- Re: New Pony Pix - FriscoSteve 9/24/2009, 3:57 pm
- Re: New Pony Pix - Jimmy G 9/24/2009, 5:36 pm
- Very nice car! - BobC 9/24/2009, 5:54 pm
  - Nice looking convertable, but I have a ?........ - T.McG/393 9/24/2009, 6:11 pm
    - Re: Nice looking convertable, but I have a ?........ - hmartin025 9/24/2009, 6:48 pm
      - Re: Nice looking convertable, but I have a ?........ - MTSteve 9/25/2009, 8:50 am
  - Re: Very nice car! - MTSteve 9/25/2009, 8:48 am
- NICE!!! And that reminds me...GET YOUR CALENDAR PICTURES READY !!! - MustangSteve 9/24/2009, 7:17 pm
  View all;
I'm about to weld in the new floor pan and I was wondering - matts67coupe 9/24/2009, 6:13 pm
View all; 3 responses, latest posted 9/25/2009, 6:43 am
- Well, you sure don;t want Por 15 on anything that will get welded! - MustangSteve 9/24/2009, 7:24 pm
- Matt you're not planning on......... - 6sally6 9/24/2009, 10:18 pm
  - Re: Matt you're not planning on......... - Glen's 1965 5.0 9/25/2009, 6:43 am
  View all;
suggestions for a cheap shipper or truck driver - cougrnut 9/23/2009, 4:34 pm
View all; 7 responses, latest posted 9/25/2009, 4:04 am
- CRATE??? - MustangSteve 9/23/2009, 8:30 pm
  - Re: CRATE??? - Paul 9/23/2009, 10:49 pm
  - FedEX ground IS cheaper - Jeff in GA 9/23/2009, 11:10 pm
    - Re: FedEX ground IS cheaper - cougrnut 9/24/2009, 5:02 am
      - The only way to be COMPLETELY safe - Greg B 9/24/2009, 9:57 am
        
        Re: The only way to be COMPLETELY safe - cougrnut 9/24/2009, 7:16 pm
        
        You can send it insured - Loosenut 9/25/2009, 4:04 am
  View all;
69 fender badge - Owen Francis 9/23/2009, 10:33 pm
View all; 6 responses, latest posted 9/24/2009, 10:31 pm
- Re: 69 fender badge - xrracer 9/24/2009, 3:12 pm
- Are you hoping to replace these? The one in the photo looks pretty good... - Bullet Bob 9/24/2009, 4:04 pm
  - I agree Bullet Bob.......... - 6sally6 9/24/2009, 6:01 pm
    - Fender badge - hmartin025 9/24/2009, 6:50 pm
      - That is not where those are supposed to go... - MustangSteve 9/24/2009, 7:16 pm
        
        Re: That is not where those are supposed to go... - Owen Francis 9/24/2009, 10:31 pm
  View all;
Carb Question - billkubi 9/13/2009, 3:15 pm
View all; 27 responses, latest posted 9/24/2009, 6:51 pm
- Re: Carb Question - MustangSteve 9/13/2009, 3:18 pm
  - Re: Carb Question - billkubi 9/13/2009, 4:03 pm
    - To set the holley - jerseyjoe 9/13/2009, 5:00 pm
      - Re: To set the holley - billkubi 9/13/2009, 5:05 pm
        
        Re: To set the holley - jerseyjoe 9/13/2009, 5:08 pm
        
        Re: To set the holley - Fasfred 9/13/2009, 6:19 pm
        
        Re: To set the holley - Al Newman 9/13/2009, 7:38 pm
        
        Re: To set the holley - billkubi 9/14/2009, 12:53 pm
        
        Just my opinion - jerseyjoe 9/14/2009, 1:41 pm
        
        Re: Just my opinion - Billkubi 9/14/2009, 2:41 pm
        
        Well then....lets start with - jerseyjoe 9/14/2009, 3:22 pm
        
        Re: To set the holley - MustangSteve 9/14/2009, 7:22 pm
        
        Re: To set the holley - Billkubi 9/15/2009, 11:30 am
        
        Re: To set the holley - MustangSteve 9/15/2009, 12:30 pm
        
        Re: To set the holley - Billkubi 9/15/2009, 8:39 pm
        
        Re: To set the holley - Billkubi 9/17/2009, 9:05 am
        
        Hey,Bill.....Steve said he - jerseyjoe 9/17/2009, 9:43 am
        
        Re: Hey,Bill.....Steve said he - Billkubi 9/17/2009, 10:17 am
        
        80457 Holley - MustangSteve 9/20/2009, 1:58 pm
        
        Re: 80457 Holley - Billkubi 9/21/2009, 9:40 am
        
        Re: 80457 Holley - MustangSteve 9/21/2009, 6:42 pm
        
        Re: 80457 Holley - Billkubi 9/24/2009, 8:47 am
        
        You followed those instructions........... - 6sally6 9/24/2009, 9:13 am
        
        Re: You followed those instructions........... - Billkubi 9/24/2009, 6:51 pm
        
        Why don't you send the carb back to Holley - jerseyjoe 9/15/2009, 12:38 pm
- Re: Carb Question - gordon 9/13/2009, 7:44 pm
  - Re: Carb Question - ralph 9/14/2009, 10:38 pm
  View all;
Rear Spring Question - Billkubi 9/23/2009, 2:31 pm
View all; 5 responses, latest posted 9/24/2009, 6:37 pm
- Sounds like an add-on "overload" spring...used to be popular. nm - Bullet Bob 9/23/2009, 3:23 pm
  - Re: Sounds like an add-on "overload" spring...used to be popular. nm - Billkubi 9/23/2009, 3:40 pm
    - Re: Sounds like an add-on "overload" spring...used to be popular. nm - Al Newman 9/24/2009, 7:31 am
    - Rear springs - hmartin025 9/24/2009, 2:56 pm
      - Re: Rear springs - Billkubi 9/24/2009, 6:37 pm
  View all;
Where are all the shows in the South East? - Ted 9/23/2009, 7:56 pm
View all; 10 responses, latest posted 9/24/2009, 6:10 pm
- cruisin the coast mississippi gulf coast oct. 4-11 2009 - arthur 9/23/2009, 8:58 pm
  - Show schedules - Ted 9/24/2009, 6:29 am
    - Re: Show schedules - gjz30075 9/24/2009, 6:54 am
      - Re: Show schedules - arthur 9/24/2009, 7:18 am
        
        Re: Show schedules - Ted 9/24/2009, 1:04 pm
    - Ted what part of the SE?? - Tubo 9/24/2009, 9:45 am
      - Re: Ted what part of the SE?? - Ted 9/24/2009, 1:03 pm
        
        Ok here's a few; - Tubo 9/24/2009, 1:27 pm
        
        And a nuther one.......... - 6sally6 9/24/2009, 6:10 pm
- classiccarbug.com - glenns66 9/24/2009, 3:00 pm
  View all;
What do you like about your timing light? - Kevin 9/23/2009, 8:38 pm
View all; 6 responses, latest posted 9/24/2009, 1:04 pm
- Re: What do you like about your timing light? - 6sally6 9/23/2009, 9:37 pm
- Re: What do you like about your timing light? - Jeff in GA 9/23/2009, 11:12 pm
- Re: What do you like about your timing light? - Mach1_Ron 9/24/2009, 7:15 am
  - Re: What do you like about your timing light? - Kevin 9/24/2009, 10:24 am
    - I also have a Craftsman with the advance - jerseyjoe 9/24/2009, 11:11 am
      - I have a relic Ctraftsman - Rudi 9/24/2009, 1:04 pm
  View all;
tire\wheel opinions needed - John 9/18/2009, 5:01 pm
View all; 8 responses, latest posted 9/24/2009, 6:14 am
- 15" or 16" tires - CraigMBA 9/18/2009, 10:55 pm
  - Re: 15" or 16" tires - John 9/19/2009, 5:46 am
    - Re: 15" or 16" tires - art 9/19/2009, 8:10 pm
- Not a 67, but 16's - JamesW 9/19/2009, 8:37 pm
- Re: tire\wheel opinions needed - Rick Johnson 9/23/2009, 6:23 pm
- Re: tire\wheel opinions needed - Terry 9/23/2009, 8:32 pm
- Re: tire\wheel opinions needed - John 9/23/2009, 9:21 pm
  - Re: tire\wheel opinions needed - JamesW 9/24/2009, 6:14 am
  View all;
Got the shaft - MustangSteve 9/22/2009, 7:16 pm
View all; 7 responses, latest posted 9/23/2009, 8:50 pm
- Sorry man... - FriscoSteve 9/22/2009, 7:34 pm
  - Good idea! - MustangSteve 9/22/2009, 7:58 pm
    - Re: Good idea! - JOHNATHAN 9/22/2009, 9:59 pm
      - Re: Good idea! - KevinM 9/23/2009, 6:29 pm
    - If you are serious... - Bullet Bob 9/22/2009, 10:13 pm
      - Bullet... - MustangSteve 9/23/2009, 7:45 pm
        
        Ah, well, yeah...most likely. Had to offer though. nm - Bullet Bob 9/23/2009, 8:50 pm
  View all;
Hinge kits? - TJ 9/23/2009, 6:28 pm
View all; 3 responses, latest posted 9/23/2009, 8:32 pm
- Re: Hinge kits? - tim42 9/23/2009, 7:51 pm
  - I still sell them - MustangSteve 9/23/2009, 8:23 pm
  - Re: Hinge kits? - TJ 9/23/2009, 8:32 pm
  View all;
power brake retro fit - spg639 9/23/2009, 3:36 pm
View all; 3 responses, latest posted 9/23/2009, 8:20 pm
- Re: power brake retro fit - MustangSteve 9/23/2009, 7:30 pm
  - Re: power brake retro fit - spg639 9/23/2009, 8:09 pm
    - Thanks - MustangSteve 9/23/2009, 8:20 pm
  View all;
Odometer reset - Mike Walters 9/18/2009, 5:51 pm
View all; 11 responses, latest posted 9/23/2009, 7:44 pm
- Re: speedometer reset - Ron68 9/19/2009, 1:39 am
- Re: speedometer reset - Pete M 9/19/2009, 1:56 am
- Mike,It's not legal...although - jerseyjoe 9/19/2009, 5:01 am
  - Just wondering - Mike Walters 9/19/2009, 9:42 am
    - Re: Just wondering - jerseyjoe 9/19/2009, 10:55 am
      - Rubics Cube - Mike Walters 9/19/2009, 2:31 pm
        
        Re: Rubics Cube - ultrastang 9/19/2009, 5:09 pm
- Totally legal, if... - BobN 9/19/2009, 4:13 pm
- It's not a problem in Indiana - Mike Walters 9/19/2009, 5:19 pm
- Re: Odometer reset - Lil' Hoss 9/23/2009, 12:10 pm
  - Re: Odometer reset - KeithP 9/23/2009, 7:44 pm
  View all;
Buy new carb or go EFI - Mark 9/22/2009, 4:31 pm
View all; 14 responses, latest posted 9/23/2009, 7:41 pm
- Re: Buy new carb or go EFI - John 9/22/2009, 5:31 pm
- Re: Buy new carb or go EFI - hmartin025 9/22/2009, 6:57 pm
  - Re: Buy new carb or go EFI - MustangSteve 9/22/2009, 7:26 pm
- Re: Buy new carb or go EFI - robby 13 9/22/2009, 8:54 pm
  - You didn't say how old the carb was........... - 6sally6 9/22/2009, 9:00 pm
- Re: Buy new carb or go EFI - JamesW 9/22/2009, 8:58 pm
  - I don't buy that argument... about easy to start after a month - MustangSteve 9/22/2009, 9:39 pm
    - Just personal experience - JamesW 9/22/2009, 10:01 pm
      - Re: Just personal experience - ultrastang 9/22/2009, 10:26 pm
        
        Re: Just personal experience - Bullet Bob 9/22/2009, 10:58 pm
- Re: Buy new carb or go EFI - Mark 9/23/2009, 4:45 pm
  - Re: Buy new carb or go EFI - John 9/23/2009, 6:21 pm
- Re: Buy new carb or go EFI - JohnS 9/23/2009, 6:47 pm
  - Re: Buy new carb or go EFI - MustangSteve 9/23/2009, 7:41 pm
  View all;
New Hydraulic Clutch bracket for a Tremec 3550, TKO 500/600 What do you think??? - Daze 9/23/2009, 1:25 pm
View all; 7 responses, latest posted 9/23/2009, 7:31 pm
- Re: New Hydraulic Clutch bracket for a Tremec 3550, TKO 500/600 What do you think??? - Mach1_Ron 9/23/2009, 1:58 pm
  - sent you a PM n/m - Daze 9/23/2009, 2:13 pm
    - Really nice Daze - jerseyjoe 9/23/2009, 3:15 pm
      - Like I said in my post, Glen had more to do with the design than I did. - Daze 9/23/2009, 4:33 pm
        
        Re: I like the idea, my input - cougrnut 9/23/2009, 4:38 pm
        
        I have been trying to design a bracket to mount a push type SC on the front of... - Daze 9/23/2009, 4:47 pm
- Re: New Hydraulic Clutch bracket for a Tremec 3550, TKO 500/600 What do you think??? - MustangSteve 9/23/2009, 7:31 pm
  View all;
Water Temp Sender HELP - Billkubi 9/21/2009, 9:31 am
View all; 6 responses, latest posted 9/23/2009, 2:29 pm
- Re: Water Temp Sender HELP - MustangSteve 9/21/2009, 12:43 pm
- Re: Water Temp Sender HELP - Ron 9/21/2009, 2:25 pm
- Re: Water Temp Sender HELP - Ron 9/21/2009, 2:41 pm
  - Re: Water Temp Sender HELP - Billkubi 9/22/2009, 8:36 am
- Re: Water Temp Sender HELP - gary 9/21/2009, 9:39 pm
  - Re: Water Temp Sender HELP - Billkubi 9/23/2009, 2:29 pm
  View all;
DRILLING MOTOR MOUNT - mark 9/19/2009, 6:35 am
View all; 2 responses, latest posted 9/23/2009, 12:16 pm
- Re: DRILLING MOTOR MOUNT - Jason 9/19/2009, 7:14 am
  - Re: DRILLING MOTOR MOUNT - Lil' Hoss 9/23/2009, 12:16 pm
  View all;
Rare prototype? Weird 63(!) mustang - Phil 9/21/2009, 10:02 am
View all; 10 responses, latest posted 9/23/2009, 11:42 am
- Re: Rare prototype? Weird 63(!) mustang - MustangSteve 9/21/2009, 12:40 pm
  - While we�re on the subject... - Hakan 9/21/2009, 1:52 pm
    - Wow, Hakan, you guys get a totally different internet over there - Phil 9/21/2009, 2:18 pm
      - Gross! - Rudi 9/21/2009, 3:56 pm
        
        IT LOOKS LIKE THE 63 LINCOLN THE WAY THE FENDERS AND NOSE ARE TOGETHER - BILLY WALTON from GEORGIA 9/21/2009, 6:41 pm
- LOOKING AT AGAIN THE TOP IS REMOVEABLE - BILLY WALTON from GEORGIA 9/21/2009, 6:45 pm
- When I saw 63 Mustang (prototype), I was thinkin NO WAY!! - Tubo 9/21/2009, 7:57 pm
  - Yeah Tube.....I remember those!!!!!.......... - 6sally6 9/21/2009, 10:12 pm
    - Re: Yeah Tube.....I remember those!!!!!.......... - hmartin025 9/23/2009, 10:19 am
      - Just tells Ya how far in advance, some of the trim had been settled. - Tubo 9/23/2009, 11:42 am
  View all;
Hey Glenns66 do you want to come cook these bugs for me - Daze 9/22/2009, 7:42 pm
View all; 4 responses, latest posted 9/23/2009, 9:16 am
- Nice....just add corn and potato - FriscoSteve 9/22/2009, 7:46 pm
- LMAO, looks like you need to keep fishing - glenns66 9/22/2009, 9:38 pm
  - I will send you a PM with my address. I have 18 of the little buggers... - Daze 9/23/2009, 9:16 am
- Where ever you are catching them - glenns66 9/22/2009, 9:43 pm
  View all;
Went to the Ft Worth show today - MustangSteve 9/19/2009, 10:32 pm
View all; 7 responses, latest posted 9/22/2009, 10:42 pm
- dang it - Don 9/20/2009, 7:58 am
  - Re: dang it - JamesW 9/20/2009, 8:01 am
    - Cruizin for a Cure. - MustangSteve 9/20/2009, 12:10 pm
      - Re: Cruizin for a Cure. - Lstar 9/22/2009, 10:57 am
        
        Re: Cruizin for a Cure. - Ed Pitts 9/22/2009, 11:14 am
        
        How wierd is that - JamesW 9/22/2009, 9:05 pm
        
        Re: How wierd is that - Lstar 9/22/2009, 10:42 pm
  View all;
Rear end Swap advice - Dave 9/22/2009, 1:51 pm
View all; 7 responses, latest posted 9/22/2009, 10:31 pm
- Re: Rear end Swap advice - TimC 9/22/2009, 4:30 pm
  - Re: Rear end Swap advice - MustangSteve 9/22/2009, 7:31 pm
- Re: Rear end Swap advice - ultrastang 9/22/2009, 7:27 pm
  - Hey, ultra... - MustangSteve 9/22/2009, 9:44 pm
    - Re: Hey, ultra... - ultrastang 9/22/2009, 10:03 pm
      - Re: Hey, ultra... - Josh 9/22/2009, 10:22 pm
        
        Re: Hey, ultra... - ultrastang 9/22/2009, 10:31 pm
  View all;
T5 THROW OUT BEARING QUESTION - MARK 9/21/2009, 6:39 pm
View all; 1 response, posted 9/22/2009, 7:45 pm
- Re: T5 THROW OUT BEARING QUESTION - MustangSteve 9/22/2009, 7:45 pm
  View all;
oil pan question for Mustang Steve - dpohlm 9/22/2009, 6:53 am
View all; 1 response, posted 9/22/2009, 7:39 pm
- Re: oil pan question for Mustang Steve - MustangSteve 9/22/2009, 7:39 pm
  View all;
New member intro - Chris Turner 9/21/2009, 4:21 pm
View all; 5 responses, latest posted 9/22/2009, 5:24 pm
- Welcome, Chris.... - Al Newman 9/21/2009, 4:45 pm
  - Welcome to FYI - MustangSteve 9/21/2009, 6:38 pm
- WELCOME THIS IS AN AWESOME BOARD...ASK ABOUT THE BASH - BILLY WALTON from GEORGIA 9/21/2009, 6:37 pm
- Welcome Chris, this board will help keep the juices flowing...nm - Bullet Bob 9/21/2009, 9:06 pm
- Welcome to FYI Chris n/m - BobC 9/22/2009, 5:24 pm
  View all;
Need Guage for dialing in AOD TV Cable - goldberg 9/17/2009, 8:29 pm
View all; 7 responses, latest posted 9/22/2009, 8:29 am
- Re: Need Guage for dialing in AOD TV Cable - Greg B 9/17/2009, 8:50 pm
  - Ramses, are you paying attention to this? - MustangSteve 9/17/2009, 9:48 pm
    - Yes sir!! - Ramses 9/17/2009, 10:48 pm
      - Re: Yes sir!! - Greg B 9/18/2009, 9:05 am
        
        Re: Yes sir!! - goldberg 9/20/2009, 12:19 pm
- Re: Need Guage for dialing in AOD TV Cable - PJ Moran 9/22/2009, 8:17 am
  - FWIW...I haven't used a gauge... - Bullet Bob 9/22/2009, 8:29 am
  View all;
I Pulled The Trigger - John Bergstrom 9/19/2009, 11:38 am
View all; 9 responses, latest posted 9/21/2009, 11:09 pm
- Re: I Pulled The Trigger - Ron68 9/19/2009, 1:12 pm
  - Re: I Pulled The Trigger - John Bergstrom 9/19/2009, 1:27 pm
    - Everybody forgets how hard it was to get wheels with the right offset - CraigMBA 9/19/2009, 4:37 pm
      - Yep...The wheels back in the 60's did not have proper backspacing - MustangSteve 9/19/2009, 6:40 pm
- Hey! Check out the Unimog in the background! - CraigMBA 9/20/2009, 4:48 pm
  - Re: Hey! Check out the Unimog in the background! - Jeff in GA 9/20/2009, 10:39 pm
    - Re: Hey! Check out the Unimog in the background! - John Bergstrom 9/21/2009, 10:52 pm
- whats going on with the 70-72 ranger in the background? - dablack 9/21/2009, 1:25 pm
  - Re: whats going on with the 70-72 ranger in the background? - John Bergstrom 9/21/2009, 11:09 pm
  View all;
power steering doesn't work turning right - Dylan Casey 9/21/2009, 2:43 pm
View all; 2 responses, latest posted 9/21/2009, 9:14 pm
- Re: power steering doesn't work turning right - Al Newman 9/21/2009, 5:02 pm
  - Don't start the engine and operate the PS.... - Bullet Bob 9/21/2009, 9:14 pm
  View all;
T5 questions, I think mine's junk - Phil 9/20/2009, 11:44 pm
View all; 5 responses, latest posted 9/21/2009, 8:41 pm
- Points to check - jerseyjoe 9/21/2009, 7:32 am
  - You can't put heavier fluid in a T5, a T5 uses ATF n/m - Daze 9/21/2009, 8:57 am
    - Re: You can't put heavier fluid in a T5, a T5 uses ATF n/m - jerseyjoe 9/21/2009, 10:14 am
      - World class 4cyl trans? - BobN 9/21/2009, 11:33 am
        
        Re: World class 4cyl trans? - Glen's 1965 5.0 9/21/2009, 8:41 pm
  View all;
65 FASTBACK TRAPDOOR PAINT - RICK 9/21/2009, 1:30 pm
View all; 4 responses, latest posted 9/21/2009, 8:00 pm
- Re: 65 FASTBACK TRAPDOOR PAINT - jerryF 9/21/2009, 2:56 pm
  - ...According to A.K. Helm - jerseyjoe 9/21/2009, 3:41 pm
- Re: 65 FASTBACK TRAPDOOR PAINT - 2PLUS2 9/21/2009, 4:24 pm
  - Interior color on Mine too - Tubo 9/21/2009, 8:00 pm
  View all;
This guys is nuts! - Steve69 9/18/2009, 11:43 am
View all; 7 responses, latest posted 9/21/2009, 7:06 pm
- He'll have that for a LONG time longer I think - CraigMBA 9/18/2009, 7:16 pm
  - NADA - Loosenut 9/19/2009, 6:48 am
- I have the first 79 Turbo COBRA delivered in San Antonio - MustangSteve 9/19/2009, 6:43 pm
  - I DID NOT REALIZE THEY MADE A MUSTANG AFTER 70 - BILLY WALTON from GEORGIA 9/20/2009, 9:47 pm
- Re: This guys is nuts! - steve69 9/21/2009, 10:33 am
  - CENTERLINES....I HAD SOME OF THEM ON MY 85 GT....MY BUDDY HAD SOME HAMMERS...REMEMBER THEM...LOL - BILLY WALTON from GEORGIA 9/21/2009, 6:48 pm
    - Re: CENTERLINES....I HAD SOME OF THEM ON MY 85 GT....MY BUDDY HAD SOME HAMMERS...REMEMBER THEM...LOL - steve69 9/21/2009, 7:06 pm
  View all;
KING COBRA PRESSURE PLATE - mark 9/21/2009, 12:27 pm
View all; 1 response, posted 9/21/2009, 3:19 pm
- Re: KING COBRA PRESSURE PLATE - Jeff in GA 9/21/2009, 3:19 pm
  View all;
Had a Run In with the Law Today - Terry M 9/11/2009, 8:30 pm
View all; 11 responses, latest posted 9/21/2009, 2:45 pm
- Long answer backatcha..... - Al Newman 9/12/2009, 6:30 am
- Re: Had a Run In with the Law Today - don 9/12/2009, 7:34 am
- Terry, don't let the law put the cuffs on you - jerseyjoe 9/12/2009, 8:14 am
  - Re: Terry, don't let the law put the cuffs on you - Terry M 9/12/2009, 7:45 pm
- Iam using the clipster headers.... - Carm 9/12/2009, 8:28 am
  - I would not move the engine - MustangSteve 9/12/2009, 8:47 am
    - Re: I would not move the engine - Terry M 9/13/2009, 1:48 am
      - Here's what I Ended Up With for Now (Pic) - Terry M 9/14/2009, 8:58 pm
        
        Re: Here's what I Ended Up With for Now (Pic) - MustangSteve 9/14/2009, 10:03 pm
        
        Re: Here's what I Ended Up With for Now (Pic) - Dylan Casey 9/21/2009, 12:17 am
        
        Re: Here's what I Ended Up With for Now (Pic) - Dylan Casey 9/21/2009, 2:45 pm
  View all;
'68 Cougar brake and clutch pedal question - stangwires 9/21/2009, 10:30 am
View all; 2 responses, latest posted 9/21/2009, 12:35 pm
- Re: '68 Cougar brake and clutch pedal question - hmartin025 9/21/2009, 12:26 pm
  - Re: '68 Cougar brake and clutch pedal question - MustangSteve 9/21/2009, 12:35 pm
  View all;
End of the season Pics of my Fairlane - Phil 9/19/2009, 8:21 pm
View all; 9 responses, latest posted 9/20/2009, 11:40 pm
- Phil...that is a beautiful car and - Bullet Bob 9/19/2009, 8:38 pm
  - Been offline lately Bob - Phil 9/19/2009, 8:46 pm
    - I was thinking of you and Murffman when I posted that, Phil.... - Bullet Bob 9/19/2009, 9:39 pm
  - Nice looking - Jim Bowie 9/20/2009, 6:41 pm
    - Phil, I gotta admit......... - 6sally6 9/20/2009, 8:38 pm
    - Not one poop - Phil 9/20/2009, 11:40 pm
- I like the gull-wing doors............:) - T.McG/393 9/20/2009, 6:58 am
- I love the old buildings......sort of. - Greg B 9/20/2009, 11:16 am
  - lots of empty bldgs here, that one is the old pwr plant - Phil 9/20/2009, 12:33 pm
  View all;
Well, I finished changing out 4 of the 8 coils on the TBird - MustangSteve 9/13/2009, 6:08 pm
View all; 15 responses, latest posted 9/20/2009, 7:26 pm
- Hey, I resemble that falcon comment... - jerryF 9/13/2009, 9:04 pm
- I know it would prolly cost a bunch, butt (thanks Sal)... - Bullet Bob 9/13/2009, 10:26 pm
- Re: Well, I finished changing out 4 of the 8 coils on the TBird - mike 9/16/2009, 10:18 pm
  - Mike, that recall only covers 2003 to 2005 models - MustangSteve 9/17/2009, 7:34 pm
    - Re: Mike, that recall only covers 2003 to 2005 models - mike 9/17/2009, 8:49 pm
      - Steve, did changing the other 4 coils fix the problem? - CraigMBA 9/19/2009, 4:52 pm
        
        Re: Steve, did changing the other 4 coils fix the problem? - MustangSteve 9/19/2009, 6:35 pm
        
        You could buy an OBD-2 scanner for around a hundred bucks - CraigMBA 9/19/2009, 11:37 pm
        
        I have an OBD II scanner - MustangSteve 9/20/2009, 12:09 pm
        
        You had a misfire and no check engine light? - CraigMBA 9/20/2009, 1:25 pm
        
        Re: You had a misfire and no check engine light? - Greg B 9/20/2009, 5:46 pm
        
        These engines are well known to have shorting out coils - MustangSteve 9/20/2009, 5:55 pm
        
        Read This - Greg B 9/20/2009, 6:39 pm
        
        I have read that before - MustangSteve 9/20/2009, 7:26 pm
        
        I have a pretty good OBD II scanner I'll loan ya... - Bullet Bob 9/20/2009, 8:53 am
  View all;
Smoken' hot show today! - tim42 9/19/2009, 8:25 pm
View all; 3 responses, latest posted 9/20/2009, 4:18 pm
- Re: Smoken' hot show today! - TJ 9/19/2009, 9:32 pm
  - Re: Smoken' hot show today! - tim42 9/19/2009, 9:40 pm
- Re: Smoken' hot show today! - Brent 9/20/2009, 4:18 pm
  View all;
what body filler do you guys use - matts67coupe 9/20/2009, 11:18 am
View all; 2 responses, latest posted 9/20/2009, 3:49 pm
- Re: what body filler do you guys use - Ron 9/20/2009, 11:44 am
- Re: what body filler do you guys use - fasfred 9/20/2009, 3:49 pm
  View all;
disc brake swap - art 9/19/2009, 7:56 pm
View all; 3 responses, latest posted 9/20/2009, 12:11 pm
- Re: disc brake swap - MustangSteve 9/19/2009, 10:18 pm
  - Re: disc brake swap - art 9/19/2009, 11:16 pm
    - Re: disc brake swap - MustangSteve 9/20/2009, 12:11 pm
  View all;
anyone have 67/68 drum spindles and hubs dirt cheap or free? - cougrnut 9/17/2009, 4:29 pm
View all; 18 responses, latest posted 9/20/2009, 9:38 am
- Will these spindles work? - MarkinNJ 9/17/2009, 9:10 pm
  - Those are the right ones - MustangSteve 9/17/2009, 9:45 pm
  - Re: Will these spindles work? - cougrnut 9/18/2009, 5:01 am
  - Re: Will these spindles work? - cougrnut 9/18/2009, 5:07 am
- Re: anyone have 67/68 drum spindles and hubs dirt cheap or free? - ultrastang 9/18/2009, 12:20 am
  - I know of no failures of stock original spindles - MustangSteve 9/18/2009, 7:05 am
    - 68 4 lug spindles free - arthur 9/18/2009, 7:22 am
    - Re: I know of no failures of stock original spindles - ultrastang 9/18/2009, 7:46 am
      - I do not have any problem with having spindles checked... - MustangSteve 9/18/2009, 10:14 am
        
        Re: I do not have any problem with having spindles checked... - ultrastang 9/18/2009, 6:19 pm
        
        The fuel cell is the safest thing you can put in your street car - CraigMBA 9/18/2009, 10:58 pm
- Re: anyone have 67/68 drum spindles and hubs dirt cheap or free? - Lil' Hoss 9/18/2009, 9:09 am
  - Re: anyone have 67/68 drum spindles and hubs dirt cheap or free? - ultrastang 9/18/2009, 6:22 pm
  - Re: spindles located. thanks to all for help!!!!! - cougrnut 9/18/2009, 8:58 pm
  - Lil'Hoss...Whats wrong with that fast back - jerseyjoe 9/18/2009, 9:13 pm
    - Re: Lil'Hoss...Whats wrong with that fast back - Lil' Hoss 9/18/2009, 10:13 pm
      - Lil'Hoss...That will be a real challenge on a 70 - MustangSteve 9/19/2009, 10:29 pm
        
        Re: Lil'Hoss...That will be a real challenge on a 70 - Lil' Hoss 9/20/2009, 9:38 am
  View all;
66 cluch chatter 4 speed 289 gt - dennisdalton 9/19/2009, 7:05 pm
View all; 2 responses, latest posted 9/19/2009, 10:23 pm
- Re: 66 cluch chatter 4 speed 289 gt - glenns66 9/19/2009, 7:29 pm
  - Re: 66 cluch chatter 4 speed 289 gt - MustangSteve 9/19/2009, 10:23 pm
  View all;
Tire/Rim Question (new member!) - The Dave 9/19/2009, 4:10 pm
View all; 2 responses, latest posted 9/19/2009, 10:17 pm
- Re: Tire/Rim Question (new member!) - art 9/19/2009, 8:01 pm
  - Re: Tire/Rim Question (new member!) - MustangSteve 9/19/2009, 10:17 pm
  View all;
T5 SWAP QUESTIONS - MARK 9/19/2009, 8:04 pm
View all; 1 response, posted 9/19/2009, 10:15 pm
- Re: T5 SWAP QUESTIONS - MustangSteve 9/19/2009, 10:15 pm
  View all;
68 cougar t-5............new/old starter? - justin 9/18/2009, 8:28 pm
View all; 5 responses, latest posted 9/19/2009, 10:13 pm
- Re: 68 cougar t-5............new/old starter? - 6sally6 9/18/2009, 11:20 pm
  - My '65 C4 starter wouldn't fit - CraigMBA 9/19/2009, 4:45 pm
    - Sal, I think you are wrong here. - MustangSteve 9/19/2009, 6:38 pm
      - Re: Sal, I think you are wrong here. - Justin 9/19/2009, 8:07 pm
        
        Re: Sal, I think you are wrong here. - MustangSteve 9/19/2009, 10:13 pm
  View all;
Instrument gauge problems - billkubi 9/7/2009, 8:51 pm
View all; 42 responses, latest posted 9/19/2009, 9:54 pm
- Re: Instrument gauge problems - Ray 9/7/2009, 10:50 pm
- There is a schematic on changing the cvu to a solid - JerryM 9/8/2009, 8:40 am
- Re: Instrument gauge problems - gary 9/8/2009, 11:46 am
  - Re: Instrument gauge problems - billkubi 9/9/2009, 12:14 pm
    - Re: Instrument gauge problems - Ron 9/9/2009, 1:46 pm
    - Water temp question - billkubi 9/10/2009, 11:19 am
      - Re: Water temp question - Ron 9/10/2009, 12:03 pm
        
        Re: Water temp question - billkubi 9/10/2009, 12:22 pm
        
        Re: Water temp question - billkubi 9/10/2009, 1:05 pm
        
        Re: Water temp question - Ron 9/10/2009, 2:02 pm
        
        Re: Water temp question - billkubi 9/10/2009, 2:18 pm
        
        Re: Water temp question - Ron 9/10/2009, 2:33 pm
        
        removing ignition switch - billkubi 9/10/2009, 5:47 pm
        
        Re: removing ignition switch - Ron 9/10/2009, 6:06 pm
        
        Re: removing ignition switch - billkubi 9/10/2009, 8:10 pm
        
        Re: removing ignition switch - Ron 9/10/2009, 8:30 pm
        
        I just did a Falcon....maybe I can remember a little - Bullet Bob 9/10/2009, 8:53 pm
        
        Re: I just did a Falcon....maybe I can remember a little - billkubi 9/10/2009, 9:33 pm
        
        You just push it in, in the ACC position, then turn it to Off... - Bullet Bob 9/10/2009, 11:13 pm
        
        Re: I just did a Falcon....maybe I can remember a little - billkubi 9/11/2009, 8:08 am
        
        Re: I just did a Falcon....maybe I can remember a little - Bullet Bob 9/11/2009, 8:20 am
        
        Re: I just did a Falcon....maybe I can remember a little - billkubi 9/11/2009, 8:54 am
        
        Re: I just did a Falcon....maybe I can remember a little - Ron 9/11/2009, 9:27 am
        
        Re: I just did a Falcon....maybe I can remember a little - billkubi 9/11/2009, 10:19 am
        
        Re: I just did a Falcon....maybe I can remember a little - billkubi 9/11/2009, 10:26 am
        
        Thank you Ron, for straightening this out...I also thought it was a 66. nm - Bullet Bob 9/11/2009, 10:34 am
        
        temp sender question - mark z 9/10/2009, 1:37 pm
        
        Re: temp sender question - Ron 9/10/2009, 2:06 pm
        
        Teflon tape - MustangSteve 9/11/2009, 5:38 pm
        
        Re: Teflon tape - Billkubi 9/16/2009, 10:30 am
        
        Re: Teflon tape - Ron 9/16/2009, 10:55 am
        
        Re: Teflon tape - hmartin025 9/16/2009, 1:19 pm
        
        Re: Teflon tape - Billkubi 9/16/2009, 1:30 pm
        
        Wrong temp sender - Ron 9/16/2009, 6:06 pm
        
        Re: Wrong temp sender - Billkubi 9/17/2009, 2:29 pm
        
        I get the correct senders from OReillys - MustangSteve 9/17/2009, 6:15 pm
        
        Re: I get the correct senders from OReillys - Billkubi 9/18/2009, 8:52 pm
        
        Re: I get the correct senders from OReillys - Billkubi 9/19/2009, 9:37 pm
        
        Re: I get the correct senders from OReillys - Billkubi 9/19/2009, 9:54 pm
        
        Wrong temp sender - Ron 9/16/2009, 6:18 pm
        
        I'm jumping in late here - darren 9/17/2009, 3:26 pm
- Re: Instrument gauge problems - Elvis 9/17/2009, 4:22 pm
  View all;
mustang steve clutch cable conversion - gary 9/11/2009, 8:39 am
View all; 4 responses, latest posted 9/19/2009, 2:44 pm
- Sent instructions via email - MustangSteve 9/11/2009, 5:42 pm
  - Re: Sent instructions via email - gary 9/17/2009, 6:31 pm
    - Re: Sent instructions via email - MustangSteve 9/17/2009, 7:16 pm
      - I HAD IT SOMEWHERE - BILLY WALTON from GEORGIA 9/19/2009, 2:44 pm
  View all;
third member leaking - ernest 9/16/2009, 10:02 pm
View all; 8 responses, latest posted 9/19/2009, 11:06 am
- Can you pin point where the leak is coming from - glenns66 9/16/2009, 11:51 pm
  - You can change the pinion seal and o-ring seal - MustangSteve 9/17/2009, 7:29 pm
    - Re: You can change the pinion seal and o-ring seal - ultrastang 9/17/2009, 8:14 pm
      - Re: You can change the pinion seal and o-ring seal - Al Newman 9/19/2009, 5:48 am
        
        Earnest.... - Loosenut 9/19/2009, 6:57 am
        
        Re: You can change the pinion seal and o-ring seal - ultrastang 9/19/2009, 7:57 am
        
        Ultrastang. you are saying - glenns66 9/19/2009, 10:19 am
        
        Re: Ultrastang. you are saying - ultrastang 9/19/2009, 11:06 am
  View all;
Ignition Switch - Ben 9/18/2009, 6:56 pm
View all; 4 responses, latest posted 9/19/2009, 9:19 am
- Re: Ignition Switch - fasfred 9/18/2009, 7:52 pm
- Re: Ignition Switch - MarkinNJ 9/18/2009, 10:41 pm
  - Re: Ignition Switch - Ben 9/19/2009, 8:10 am
    - That pink wire doesn't start out pink from the ign switch - MarkinNJ 9/19/2009, 9:19 am
  View all;
GT40-P heads - JOHNATHAN 9/18/2009, 10:50 am
View all; 6 responses, latest posted 9/19/2009, 8:46 am
- Re: GT40-P heads - 6sally6 9/18/2009, 11:10 am
- Intake or exhaust?? - Tubo 9/18/2009, 11:12 am
  - Re: Intake or exhaust?? - Kevin,M 9/18/2009, 5:15 pm
- Re: GT40-P heads - JohnS 9/18/2009, 5:48 pm
  - Re: GT40-P heads - cougrnut 9/18/2009, 9:05 pm
    - Fox headers in a classic stang don't fit. - Tubo 9/19/2009, 8:46 am
  View all;
Brakes finally bled.... - Al Newman 9/18/2009, 6:23 pm
View all; 7 responses, latest posted 9/19/2009, 5:37 am
- I was very interested. Thanks for posting n/m - Mike Walters 9/18/2009, 7:35 pm
- Re: Brakes finally bled.... - fasfred 9/18/2009, 7:48 pm
  - Can't fool Al..... - jerseyjoe 9/18/2009, 8:52 pm
    - Re: Can't fool Al..... - cougrnut 9/18/2009, 9:01 pm
- I can finally go to sleep now. - MarkinNJ 9/18/2009, 10:43 pm
  - You know Al........ - 6sally6 9/18/2009, 11:13 pm
    - Sal old pal..... - Al Newman 9/19/2009, 5:37 am
  View all;
Stupidest good idea Ive had in a while. Off topic. - Greg B 9/17/2009, 2:30 pm
View all; 15 responses, latest posted 9/18/2009, 10:10 pm
- good for you. - darren 9/17/2009, 3:09 pm
- Re: Stupidest good idea Ive had in a while. Off topic. - MarkinNJ 9/17/2009, 3:24 pm
  - Re: Stupidest good idea Ive had in a while. Off topic. - 6sally6 9/17/2009, 4:07 pm
- Greg, have you considered stomping the walls - glenns66 9/17/2009, 6:44 pm
- Go to Menards and get a sanding pad made to run with a shop vac........ - T.McG/393 9/17/2009, 8:03 pm
  - Re: Go to Menards and get a sanding pad made to run with a shop vac........ - Greg B 9/17/2009, 8:39 pm
    - yep there is dust evertwhere - glenns66 9/17/2009, 9:01 pm
    - Re: Go to Menards and get a sanding pad made to run with a shop vac........ - Greg B 9/17/2009, 9:20 pm
    - Re: Go to Menards and get a sanding pad made to run with a shop vac........ - T.McG/393 9/17/2009, 9:33 pm
      - everyone is offering advice on how to accomplish this - darren 9/18/2009, 7:43 am
        
        Re: everyone is offering advice on how to accomplish this - Pete M 9/18/2009, 8:18 am
        
        LOL But I have a new problem concerning the floor - Greg B 9/18/2009, 8:53 am
        
        Re: LOL But I have a new problem concerning the floor - 6sally6 9/18/2009, 11:08 am
        
        Forget the ceramic tile, it's another thing you will regret doing. - MarkinNJ 9/18/2009, 10:10 pm
        
        Re: everyone is offering advice on how to accomplish this - T.McG/393 9/18/2009, 8:44 pm
  View all;

Page:

1 2 3 4 5 6 7

Message Archive

Post your Mustang question

Your Name:
Your Email:

Mustang Related Subject:

Message:

Post PIC: (URL from internet hosted picture)

Optional Link Title: (all links require a title)
Mustang Site Link URL: ALSO MUST ENTER TITLE

Notify me by email of all message replies.
Post a Poll
Question to ask:

Enter up to 10 possible answers for your question:

Answer 1:

Answer 2:

Answer 3:

Answer 4:

Answer 5:


Answer 6:

Answer 7:

Answer 8:

Answer 9:

Answer 10:

By posting, you confirm that you have read and agreed to be bound by the board's usage terms.

Users active in the last 15 minutes: , 2PLUS2, ChrisH IA, F15Falcon, Opentracker, ernest, jerseyjoe 6 total.

REMEMBER!!! When posting a question about your Mustang or other Ford on this FORD MUSTANG FORUM, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.