[ Post your Mustang question | MustangSteve.com - click here ]

FYI FORD

MustangSteve's

Ford Mustang Forum

The Internet's Most Knowledgeable Classic Mustang Information

IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE

MustangSteve has over 30 years of Mustang experience, having owned 19 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify (Especially Modify) their Mustang....THERE ARE NO DUMB QUESTIONS!!!!!

Visit MustangSteve's web site to view some of my work and find details for:

FYIFORD Contributors' PICTURES

Power Brake Retrofit Kits for 65-66 Stangs

Classic Mustang FAQ's by MustangSteve

How to wire in a Duraspark Ignition

Mustang Ride Height Pictures and Descriptions

Steel Bushings to fit Granada Spindles to Mustang Tie Rods

BUY or SELL Mustangs and Parts on MustangSteve's SWAP MEET Page

Vist my EBAY store MustangSteve Performance

How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page

FYIFORD Acronyms for guide to all the acronyms used on this page

FYIFORD Important information and upcoming events

Map shows where all the contributors are located - ADD YOURS

MustangSteve's LAW of Automotive Repair and Restoration:

Any automotive repair or restoration will take twice as long and cost twice as much as originally planned, even after careful prior consideration of MustangSteve's LAW

Time 10/7/2008, 5:45 pm

Page: 1 2 3 4 5 6 7 8 ; Message Archive

WHY ARE RACK & PINION KITS SO MUCH? - MIKE 9/12/2008, 8:11 pm
View all; 20 responses, latest posted 9/15/2008, 11:59 am
- Try building your own. Post back. - CraigMBA 9/12/2008, 8:53 pm
  - I agree its tough. But racks are on rear steer cars too. - darren 9/12/2008, 9:33 pm
  - Re: Try building your own. Post back. - JKeys 9/12/2008, 9:54 pm
    - Re: Try building your own. Post back. - Richard 9/12/2008, 10:11 pm
      - Re: Try building your own. Post back. - MIKE 9/12/2008, 10:41 pm
      - Concerning cost of brake parts - MustangSteve 9/13/2008, 5:12 pm
        
        Mustang stuff is often more expensive - Pete September 9/15/2008, 10:00 am
    - Tell us more about this power steering pump. I have to - JerryM 9/13/2008, 5:17 am
      - It's all been posted before - JKeys 9/13/2008, 11:24 am
  - Please explain Rear Steer and Front Steer.... - Mach1_Ron 9/15/2008, 11:03 am
    - Describing where the steering arm is on the spindle... - Tubo 9/15/2008, 11:59 am
- Re: WHY ARE RACK & PINION KITS SO MUCH? - Tubo 9/12/2008, 9:27 pm
- Well. the ones at Autozone are rebuilt from mass produced items - MustangSteve 9/12/2008, 11:09 pm
  - Re: Well. the ones at Autozone are rebuilt from mass produced items - mike 9/13/2008, 8:52 am
    - The Mustang racks are mostly low-volume production items - MustangSteve 9/13/2008, 4:01 pm
- Re: WHY ARE RACK & PINION KITS SO MUCH? - David in GA 9/13/2008, 12:02 pm
- Re: WHY ARE RACK & PINION KITS SO MUCH? - Doug G 9/13/2008, 12:03 pm
- Re: WHY ARE RACK & PINION KITS SO MUCH? - lowercasesteve 9/13/2008, 12:28 pm
  - Re: WHY ARE RACK & PINION KITS SO MUCH? - MIKE 9/13/2008, 1:20 pm
- Re: WHY ARE RACK & PINION KITS SO MUCH? - John Harvey 9/13/2008, 2:57 pm
  View all;
1965 Rear End ?? - A.J. 9/12/2008, 2:49 am
View all; 7 responses, latest posted 9/15/2008, 11:07 am
- Well... - Al Newman 9/12/2008, 6:43 am
  - also - Don 9/12/2008, 3:24 pm
  - Thanks - A.J. 9/13/2008, 11:22 am
    - Well.... - Al Newman 9/14/2008, 7:24 am
- Rear replacement - MustangSteve 9/14/2008, 11:50 am
  - Good Luck... - Al Newman 9/14/2008, 2:38 pm
    - Re: Good Luck... - ultrastang 9/15/2008, 11:07 am
  View all;
Bullet rim question - R.W. 9/14/2008, 11:58 pm
View all; 2 responses, latest posted 9/15/2008, 9:59 am
- Re: Bullet rim question - MustangSteve 9/15/2008, 7:23 am
  - Re: Bullet rim question - R.W. 9/15/2008, 9:59 am
  View all;
granada brake swap issue - Rick 9/15/2008, 9:56 am
0 responses
Great Video/Great song.... - JamesW 9/14/2008, 8:52 pm
View all; 1 response, posted 9/14/2008, 9:54 pm
- yeah that was a 66 - BILLY WALTON from GEORGIA 9/14/2008, 9:54 pm
  View all;
TKO-600 pictures in a 66 mustang - Tonie 9/14/2008, 4:57 am
View all; 4 responses, latest posted 9/14/2008, 4:22 pm
- Re: TKO-600 pictures in a 66 mustang - MustangSteve 9/14/2008, 11:50 am
  - Re: TKO-600 pictures in a 66 mustang - Tonie 9/14/2008, 12:48 pm
    - Tonie... judging by those pictures ............ - jersey joe 9/14/2008, 1:18 pm
    - Re: TKO-600 pictures in a 66 mustang - JKeys 9/14/2008, 4:22 pm
  View all;
The good news and the bad news - Daze 9/13/2008, 10:48 am
View all; 11 responses, latest posted 9/14/2008, 12:01 pm
- Praying for a quick and complete recovery - Lil' Hoss 9/13/2008, 11:01 am
- We will be praying for her - MustangSteve 9/13/2008, 11:17 am
- You both are in our thoughts and prayers. n/m - BobC 9/13/2008, 11:46 am
- Our prayers are with you.............. - Iron maiden 9/13/2008, 11:57 am
- Re: The good news and the bad news - lowercasesteve 9/13/2008, 12:32 pm
  - still thinking about yall - BILLY WALTON from GEORGIA 9/13/2008, 12:36 pm
- Keep your chin up - things will work out for you both - Ron68 9/13/2008, 12:57 pm
  - Re: Keep your chin up - things will work out for you both - John 9/13/2008, 5:15 pm
- Re: The good news and the bad news - glenns66 9/13/2008, 5:38 pm
  - Thanks for the support every one, I will keep you posted!!!!!!!!n/m - Daze 9/13/2008, 8:08 pm
- Man I don't read for a few days and I miss Hurricanes, wiped cams and this - Phil 9/14/2008, 12:01 pm
  View all;
Happy Birthday Glen Buzek - ultrastang 9/12/2008, 1:03 am
View all; 15 responses, latest posted 9/13/2008, 8:33 pm
- Wauuuuu, one more ...................... - Mustsed 9/12/2008, 1:21 am
  - Re: Wauuuuu, one more ...................... - ultrastang 9/12/2008, 1:43 am
    - Happy Birthday to the NEW GLEN - MustangSteve 9/12/2008, 7:50 am
      - Re: Happy Birthday GLEN - Lou 9/12/2008, 8:32 am
        
        Who�s Ike? - H�kan 9/12/2008, 1:08 pm
        
        Thanks All... - Glen's 1965 5.0 9/12/2008, 4:24 pm
        
        See????????? - MustangSteve 9/12/2008, 5:25 pm
        
        Love the graphics, Hakan! - MustangSteve 9/12/2008, 5:25 pm
        
        Thanks MS! Yes, that�s pretty much... - H�kan 9/12/2008, 6:41 pm
        
        Hmmmm - where have I seen that car before - Ron68 9/13/2008, 1:14 pm
        
        Image shack - whats up with that?? - Ron68 9/13/2008, 1:18 pm
        
        Re: Love the graphics, H�kan! - ultrastang 9/13/2008, 7:20 am
        
        HAPPY BIRTHDAY GLEN - BILLY WALTON from GEORGIA 9/13/2008, 8:20 am
        
        Yep, that�s the pic I used to make the graphic... - H�kan 9/13/2008, 4:14 pm
        
        H�kan, note one.............. - T.McG/393 9/13/2008, 8:33 pm
  View all;
break line dual exhaust clearance issue - kurt 9/10/2008, 9:56 pm
View all; 9 responses, latest posted 9/13/2008, 6:39 pm
- Try this... - Lee D. 9/11/2008, 7:14 am
  - thanks Lee D. helps a lot...NM - kurt 9/11/2008, 9:05 am
- There is a special hose for dual exhaust equipped cars - MustangSteve 9/11/2008, 7:28 am
  - Re: There is a special hose for dual exhaust equipped cars - kurt 9/11/2008, 9:02 am
    - that special hose for dual exhaust cars moves down on the axle - MarkinNJ 9/11/2008, 10:31 am
      - Re: that special hose for dual exhaust cars moves down on the axle - MustangSteve 9/11/2008, 12:40 pm
        
        Yes it does, but there is a metal peice now attached to that brass block - MarkinNJ 9/11/2008, 3:22 pm
        
        I had the same problem about a year ago - CraigMBA 9/13/2008, 1:10 am
  - 69 hose question for Steve - kurt 9/13/2008, 6:39 pm
  View all;
Bullitt rims - Jeff Starkell 9/13/2008, 9:06 am
View all; 1 response, posted 9/13/2008, 5:21 pm
- Re: Bullitt rims - MustangSteve 9/13/2008, 5:21 pm
  View all;
wiring problem - andy 9/10/2008, 9:55 pm
View all; 4 responses, latest posted 9/13/2008, 3:52 pm
- Re: wiring problem - T.McG/393 9/11/2008, 6:29 am
- stuck solenoid? or short? - MarkinNJ 9/11/2008, 4:03 pm
- heres what those color wires go to - MarkinNJ 9/11/2008, 10:20 pm
- Re: wiring problem - andy 9/13/2008, 3:52 pm
  View all;
Upper Radiator Hose Question - steve69 9/12/2008, 11:16 am
View all; 5 responses, latest posted 9/13/2008, 2:51 pm
- Re: Upper Radiator Hose Question - T.McG/393 9/12/2008, 4:59 pm
  - Re: Upper Radiator Hose Question - JamesW 9/13/2008, 11:54 am
- Re: Upper Radiator Hose Question - MustangSteve 9/12/2008, 5:23 pm
  - Re: Upper Radiator Hose Question - Mike 9/13/2008, 10:06 am
    - Re: Upper Radiator Hose Question - steve69 9/13/2008, 2:51 pm
  View all;
Hope you folks in Texas are OK. - Loosenut 9/13/2008, 5:05 am
0 responses
HEY!!! WHERE's BILLY??????????? - MustangSteve 9/9/2008, 10:16 pm
View all; 15 responses, latest posted 9/12/2008, 10:12 pm
- im here....i just hate looking for new post - BILLY WALTON from GEORGIA 9/10/2008, 6:59 am
  - I'm with ya BILLY........n/m - Mach1_Ron 9/10/2008, 7:29 am
  - The new posts are always at the top of the page. - JerryM 9/10/2008, 8:26 am
    - DO YOU HAVE MORE TRAFFIC TO THE SITE SINCE THE CHANGE?? - BILLY WALTON from GEORGIA 9/11/2008, 12:40 am
      - ALSO DID YOU FIND ROXANNE????? - BILLY WALTON from GEORGIA 9/11/2008, 12:40 am
        
        Never found Roxanne... - MustangSteve 9/11/2008, 7:29 am
      - Yes, I have been seeing some new names posting here - MustangSteve 9/11/2008, 7:39 am
- Re: HEY!!! WHERE's BILLY??????????? - ultrastang 9/11/2008, 4:06 am
  - i dont guess i will get the award for the most post again - BILLY WALTON from GEORGIA 9/11/2008, 9:22 am
    - BILLY... - MustangSteve 9/11/2008, 12:44 pm
      - HEY BILLY!!!!!!!!! - 6sally6 9/11/2008, 6:39 pm
- The changes really arent the end of the world, you know... - darren 9/11/2008, 10:18 am
  - I NEVER SAID THEY WERE...I AM A PIONEER TO THIS SITE - BILLY WALTON from GEORGIA 9/11/2008, 10:33 pm
    - you just seemed a little down to me....... - darren 9/11/2008, 10:46 pm
      - thanks the lottery is about the only thing could cheer me up lately... - BILLY WALTON from GEORGIA 9/12/2008, 10:12 pm
  View all;
Hey...Did I tell you guyz about the"cool" 49 coupe I saw..... - 6sally6 9/11/2008, 7:59 pm
View all; 9 responses, latest posted 9/12/2008, 10:04 pm
- ive seen one of those before, or eerily similar... - darren 9/11/2008, 10:50 pm
  - Re: ive seen one of those before, or eerily similar... - R.W. 9/11/2008, 11:19 pm
- Re: Hey...Did I tell you guyz about the"cool" 49 coupe I saw..... - lowercasesteve 9/11/2008, 11:53 pm
  - What also amazing.......... - 6sally6 9/12/2008, 9:49 am
- Re: Hey...Did I tell you guyz about the"cool" 49 coupe I saw..... - hmartin025 9/12/2008, 2:40 pm
- Company is called EasyRods. They make the - JerryM 9/12/2008, 5:16 pm
  - Re: Company is called EasyRods. They make the - BakoBob 9/12/2008, 5:29 pm
  - Can't even get the web site correct. www.easyrods.com - JerryM 9/12/2008, 8:45 pm
    - went to the website, don't really like chebbies, but - darren 9/12/2008, 10:04 pm
  View all;
On Battery #3... - Marlon 9/11/2008, 5:55 pm
View all; 10 responses, latest posted 9/12/2008, 8:59 pm
- Re: On Battery #3... - hmartin025 9/11/2008, 6:37 pm
- Re: On Battery #3... - T.McG/393 9/11/2008, 6:56 pm
  - Re: On Battery #3... - Marlon 9/12/2008, 8:54 am
    - I see, you are getting back fed from the coil through the brown wire in run mode. - T.McG/393 9/12/2008, 1:27 pm
      - Re: I see, you are getting back fed from the coil through the brown wire in run mode. - hmartin025 9/12/2008, 2:29 pm
        
        Re: I see, you are getting back fed from the coil through the brown wire in run mode. - Marlon 9/12/2008, 2:58 pm
  - Re: On Battery #3... - MarkinNJ 9/12/2008, 1:46 pm
    - Your correct. Electric choke should be hooked up to - JerryM 9/12/2008, 5:05 pm
- Have you had your stuff checked - John Ha 9/12/2008, 1:39 pm
- Here's what Holley says about wiring choke, ............ - T.McG/393 9/12/2008, 8:59 pm
  View all;
Booster & MC Cobra brakes - John 9/12/2008, 6:12 pm
View all; 1 response, posted 9/12/2008, 8:32 pm
- Yes - email for details - MustangSteve 9/12/2008, 8:32 pm
  View all;
Hmm that's a mustang wheel cover but - John Z 9/12/2008, 8:12 pm
View all; 7 responses, latest posted 9/12/2008, 8:25 pm
- a little closer view? - John Z 9/12/2008, 8:14 pm
  - Re: a little closer view? - John Z 9/12/2008, 8:16 pm
    - Sure wish there was an edit function - John Z 9/12/2008, 8:18 pm
      - Yep. that's a mustang - John Z 9/12/2008, 8:20 pm
        
        I haven't seen anything like this before - John Z 9/12/2008, 8:22 pm
    - Rotary Mustang - MustangSteve 9/12/2008, 8:20 pm
      - Re: Rotary Mustang - John Z 9/12/2008, 8:25 pm
  View all;
Try Again - R.W. 9/11/2008, 11:08 pm
View all; 5 responses, latest posted 9/12/2008, 8:15 pm
- It could happen butt....... - 6sally6 9/12/2008, 9:53 am
  - Re: It could happen butt....... - BakoBob 9/12/2008, 5:11 pm
- Really can't afford to take the chance, ya gotta leave. - JerryM 9/12/2008, 5:21 pm
  - Re: Really can't afford to take the chance, ya gotta leave. - R.W. 9/12/2008, 8:09 pm
- Everythings bigger in Texas, even hurricanes. I would heed thier warnings. - MarkinNJ 9/12/2008, 8:15 pm
  View all;
Solid State Voltage Regulator - gary 9/11/2008, 9:53 pm
View all; 2 responses, latest posted 9/12/2008, 7:28 pm
- Re: Solid State Voltage Regulator - waynep712 9/12/2008, 1:11 am
- Re: Solid State Voltage Regulator - gary 9/12/2008, 7:28 pm
  View all;
Lets try this again, Not car related but I wanted to let everyone know... - Daze 9/11/2008, 10:33 am
View all; 20 responses, latest posted 9/12/2008, 5:26 pm
- Re: Lets try this again, Not car related but I wanted to let everyone know... - Lou 9/11/2008, 11:13 am
- ditto, I hope things go well for you and your wife! - jason 5.0 EFI 9/11/2008, 12:03 pm
- Godspeed Daze - CraigMBA 9/11/2008, 12:09 pm
- She's got my prayers............ - jersey joe 9/11/2008, 12:38 pm
- Re: Lets try this again, Not car related but I wanted to let everyone know... - Kenny Bryson 9/11/2008, 12:42 pm
- Best Wishes! - John Ha 9/11/2008, 4:38 pm
  - Re: Best Wishes! - LoosenutLoosenut 9/11/2008, 5:35 pm
    - Re: Best Wishes! - Kevin,M 9/11/2008, 5:57 pm
      - Re: Best Wishes! - Greg B. 9/11/2008, 6:02 pm
- We'll be thinking about ya, hang in there. - T.McG/393 9/11/2008, 6:45 pm
- Re: Lets try this again, Not car related but I wanted to let everyone know... - gordon 9/11/2008, 8:05 pm
- Re: Lets try this again, Not car related but I wanted to let everyone know... - deb 9/11/2008, 9:13 pm
  - Re: Lets try this again, Not car related but I wanted to let everyone know... - charlie's68-6 9/11/2008, 9:18 pm
- With you before, still with Ya now. - Tubo 9/11/2008, 9:16 pm
- THINKING ABOUT YA DAZE.... - BILLY WALTON from GEORGIA 9/11/2008, 10:30 pm
- Best wishes for both of you ! - Mustsed 9/12/2008, 1:42 am
- Re: Lets try this again, Not car related but I wanted to let everyone know... - steve69 9/12/2008, 9:58 am
  - Look for a miracle to happen........ - 6sally6 9/12/2008, 2:25 pm
    - Re: Look for a miracle to happen........ - BakoBob 9/12/2008, 5:20 pm
- Re: Lets try this again, Not car related but I wanted to let everyone know... - Ron68 9/12/2008, 5:26 pm
  View all;
Went to pick up some Craigslist fenders - MustangSteve 9/11/2008, 10:21 pm
View all; 9 responses, latest posted 9/12/2008, 5:24 pm
- I had a perfect unwelded no bondo no rust fender on Craiglist - CraigMBA 9/11/2008, 10:25 pm
  - Re: I had a perfect unwelded no bondo no rust fender on Craiglist - MustangSteve 9/11/2008, 10:47 pm
    - The OE Ford Tooling ones are made here and worth the price - CraigMBA 9/12/2008, 12:42 am
    - Re: I had a perfect unwelded no bondo no rust fender on Craiglist - P J Moran 9/12/2008, 1:17 pm
    - Re: I had a perfect unwelded no bondo no rust fender on Craiglist - Don 9/12/2008, 3:15 pm
      - Re: I had a perfect unwelded no bondo no rust fender on Craiglist - BakoBob 9/12/2008, 4:10 pm
        
        I have two original welded, bondoed slightly rusted fenders - Greg B. 9/12/2008, 4:30 pm
        
        I went to Arlington Swap Meet today - MustangSteve 9/12/2008, 5:05 pm
        
        Re: I went to Arlington Swap Meet today - BakoBob 9/12/2008, 5:24 pm
  View all;
What is the stock rear ride height of a ......... - Craig Mitchell 9/12/2008, 5:04 pm
View all; 2 responses, latest posted 9/12/2008, 5:21 pm
- Re: What is the stock rear ride height of a ......... - MustangSteve 9/12/2008, 5:07 pm
  - But my car raised by the air shocks........... - Craig Mitchell 9/12/2008, 5:21 pm
  View all;
68 Shelby upper scoops - Craig Mitchell 9/12/2008, 4:45 pm
0 responses
I hope everyone in Texas is ready for IKE! - R.W. 9/11/2008, 11:04 pm
View all; 1 response, posted 9/12/2008, 4:05 pm
- Re: I hope everyone in Texas is ready for IKE! - BakoBob 9/12/2008, 4:05 pm
  View all;
The verdict is in.......................... - Iron maiden 9/11/2008, 8:52 pm
View all; 21 responses, latest posted 9/12/2008, 3:33 pm
- Hey Iron - Jim 9/11/2008, 9:12 pm
  - Re: Yo Iron - Greg P. 9/11/2008, 9:35 pm
- Re: The verdict is in.......................... - Skip 9/11/2008, 9:36 pm
  - Been there, too - MustangSteve 9/11/2008, 10:15 pm
- Please read this before you redo the cam again - CraigMBA 9/11/2008, 10:26 pm
  - Good instruction manual! - MustangSteve 9/11/2008, 10:36 pm
- Is anyone here really done working on thier mustang? - MarkinNJ 9/11/2008, 10:42 pm
- Be Patient - ultrastang 9/12/2008, 12:44 am
- That is just one more .................... - Mustsed 9/12/2008, 1:31 am
- After the fact... - Al Newman 9/12/2008, 6:38 am
  - Dating Game ....................... - jersey joe 9/12/2008, 7:13 am
- Re: The verdict is in.......................... - Craig 9/12/2008, 8:12 am
- Don't trow in the towl! - TJ 9/12/2008, 9:01 am
  - Here's my sympathic story....... - 6sally6 9/12/2008, 9:43 am
    - Re: Here's my sympathic story....... - steve69 9/12/2008, 9:57 am
      - Re: Here's my sympathic story....... - Mike 9/12/2008, 10:34 am
    - Re: Here's my sympathic story....... - Kristang 9/12/2008, 2:35 pm
      - Re: Here's my sympathic story....... - BakoBob 9/12/2008, 3:33 pm
  - TJ - I think you mean .................. - Lou 9/12/2008, 11:41 am
  - Why won't it work like it is - John Ha 9/12/2008, 1:30 pm
    - Re: Why won't it work like it is - Lil' Hoss 9/12/2008, 1:55 pm
  View all;
What Kind of Fly wheel 1970 mustang 302 - Dolphiedog 9/12/2008, 1:43 pm
View all; 2 responses, latest posted 9/12/2008, 3:09 pm
- the weight will be 28 oz... - Daze 9/12/2008, 2:08 pm
- Re: What Kind of Fly wheel 1970 mustang 302 - Dolphiedog 9/12/2008, 3:09 pm
  View all;
Wheel Stud problem. - Chris 9/12/2008, 5:43 am
View all; 6 responses, latest posted 9/12/2008, 1:50 pm
- Looks like someone put wrong studs in there before - MustangSteve 9/12/2008, 7:49 am
  - Re: Looks like someone put wrong studs in there before - Chris 9/12/2008, 9:24 am
- Re: Wheel Stud problem. - Rudi 9/12/2008, 9:38 am
  - Re: Wheel Stud problem. - Chris 9/12/2008, 11:05 am
    - Nope! - Rudi 9/12/2008, 1:50 pm
- here is a link to dorman catalog to look up wheel studs by size - waynep712 9/12/2008, 11:17 am
  View all;
HEY BILLY WALTON...... - 6sally6 9/11/2008, 8:01 pm
View all; 3 responses, latest posted 9/12/2008, 1:11 pm
- SOUNDS LIKE A GOOD PLAN....GET ME A DATE UP - BILLY WALTON from GEORGIA 9/11/2008, 10:31 pm
  - O YEAH....I NEVER PUT TACH IN...IT SEEMS LIKE IT IS REVING PRETTY GOOD THOUGH - BILLY WALTON from GEORGIA 9/11/2008, 10:32 pm
    - How's the clutch pedal?? - jerryF 9/12/2008, 1:11 pm
  View all;
provigil sale - provig 9/12/2008, 11:26 am
View all; 1 response, posted 9/12/2008, 12:01 pm
- Get Out the Bread and Miracle Whip - ultrastang 9/12/2008, 12:01 pm
  View all;
Electric Fan and Shroud for 66 Coupe - Skip 9/9/2008, 9:10 pm
View all; 22 responses, latest posted 9/12/2008, 10:02 am
- Re: Electric Fan and Shroud for 66 Coupe - MustangSteve 9/9/2008, 9:15 pm
  - Re: Electric Fan and Shroud for 66 Coupe - Skip 9/9/2008, 9:32 pm
    - Since you asked... - MustangSteve 9/9/2008, 10:10 pm
      - I agree with Steve's theory...................... - T.McG/393 9/9/2008, 10:43 pm
        
        Re: I agree with Steve's theory...................... - Skip 9/9/2008, 11:10 pm
        
        Hey Skip.... - Tubo 9/10/2008, 7:47 am
        
        Amen, Tubo... - MustangSteve 9/10/2008, 12:30 pm
      - Re: Since you asked... - ultrastang 9/9/2008, 11:11 pm
        
        Yes, I have power windows AND locks - MustangSteve 9/10/2008, 12:34 pm
    - I'm with the KISS group - Lou 9/10/2008, 8:18 am
      - Lou, I was gonna ask you... - jerryF 9/10/2008, 10:26 pm
        
        Re: Lou, I was gonna ask you... - Lou 9/11/2008, 7:19 am
  - Re: Electric Fan and Shroud for 66 Coupe - hmartin025 9/10/2008, 1:46 am
  - Re: Electric Fan and Shroud for 66 Coupe - steve69 9/10/2008, 9:29 am
    - Make your own - stanger53 9/10/2008, 10:26 am
      - I got a "lectric" one on mine.......... - 6sally6 9/10/2008, 4:56 pm
        
        Re: I got a "lectric" one on mine.......... - Richard 9/10/2008, 7:32 pm
        
        Re: I got a "lectric" one on mine.......... - Skip 9/10/2008, 8:19 pm
        
        Re: I got a "lectric" one on mine.......... - ultrastang 9/10/2008, 9:32 pm
        
        Electric Fan In An Early Mustang - ultrastang 9/11/2008, 7:32 pm
        
        WOW!!! That really sucks!!! - 6sally6 9/11/2008, 8:04 pm
        
        Re: WOW!!! That really sucks!!! - steve69 9/12/2008, 10:02 am
  View all;
1966 Mustang Rear Spoiler - David in GA 9/5/2008, 7:25 pm
View all; 19 responses, latest posted 9/12/2008, 9:57 am
- where you at in GEORGIA??? NOT FAMILAR WITH A REAR SPOILER THAT LOOKS GOOD ON 66>>> - BILLY WALTON 9/5/2008, 10:34 pm
  - Re: where you at in GEORGIA??? NOT FAMILAR WITH A REAR SPOILER THAT LOOKS GOOD ON 66>>> - David in GA 9/6/2008, 9:22 am
    - I HVENT SEEN ONE THAT LOOKS GOOD.... - BILLY WALTON 9/6/2008, 10:17 am
      - Re: I HVENT SEEN ONE THAT LOOKS GOOD.... - tom kennedy 9/6/2008, 10:59 pm
        
        Re: I HVENT SEEN ONE THAT LOOKS GOOD.... - BakoBob 9/8/2008, 2:13 pm
        
        Re: I HVENT SEEN ONE THAT LOOKS GOOD.... - tom kennedy 9/8/2008, 7:17 pm
        
        PLEASE !!!! Send me a picture of that when you get it installed!!!! - MustangSteve 9/8/2008, 7:50 pm
        
        Re: PLEASE !!!! Send me a picture of that when you get it installed!!!! - ultrastang 9/9/2008, 7:37 am
        
        Re: PLEASE !!!! Send me a picture of that when you get it installed!!!! - Rudi 9/9/2008, 8:04 am
        
        I believe that you would have to give your Mustang - Ron68 9/9/2008, 8:31 am
        
        Re: I believe that you would have to give your Mustang - tom kennedy 9/9/2008, 10:37 am
- you can combine your decklid and the fiberglass spoiler - Jeffro 9/9/2008, 3:55 pm
  - Re: Early Mustang rear spoiler - Greg P. 9/11/2008, 10:41 am
    - Re: Early Mustang rear spoiler - Marlon 9/11/2008, 11:04 am
      - they didn't make them anymore as far as I found when I did it... - Jeffro 9/11/2008, 7:15 pm
- Re: 1966 Mustang Rear Spoiler - nathan 9/11/2008, 8:30 pm
  - Re: 1966 Mustang Rear Spoiler - David in GA 9/11/2008, 8:56 pm
    - Re: 1966 Mustang Rear Spoiler - nathan 9/11/2008, 9:40 pm
- Re: 1966 Mustang Rear Spoiler - Mach1_Ron 9/12/2008, 9:57 am
  View all;
master cylinder... - omar 9/11/2008, 11:44 pm
View all; 2 responses, latest posted 9/12/2008, 9:43 am
- Re: master cylinder... - MustangSteve 9/12/2008, 7:52 am
  - Re: master cylinder... - Rudi 9/12/2008, 9:43 am
  View all;
I have a cooling problem I haven't read about much... - Lance 9/11/2008, 8:03 pm
View all; 9 responses, latest posted 9/12/2008, 9:40 am
- Well..... - Al Newman 9/11/2008, 8:14 pm
  - Re: Well..... - Greg B. 9/11/2008, 9:48 pm
    - You need a new T-stat - MustangSteve 9/11/2008, 10:11 pm
      - I thought that.......... - Mr. Tim 9/12/2008, 9:40 am
  - Re: Cold not Hot, thats different ! - Greg P. 9/11/2008, 9:50 pm
    - I have a set of World Products, Rousch cast-iron heads. N/M - Lance 9/12/2008, 7:07 am
- Re: I have a cooling problem I haven't read about much... - waynep712 9/12/2008, 1:33 am
  - I can't use a clutch fan setup because... - Lance 9/12/2008, 7:19 am
    - Re: I can't use a clutch fan setup because... - hmartin025 9/12/2008, 9:35 am
  View all;
Glen or any one on the TX cost my thoughts are with you... - Daze 9/11/2008, 7:54 pm
View all; 1 response, posted 9/12/2008, 8:35 am
- enjoying the day off - Bob N 9/12/2008, 8:35 am
  View all;
1969 deluxe seats...buttons??? - Deb 9/9/2008, 4:16 pm
View all; 4 responses, latest posted 9/11/2008, 9:59 pm
- Im a far cry (hellooooooo) from being an expert but - John Ha 9/9/2008, 5:43 pm
- Thanks, John. looks like - Deb 9/9/2008, 10:34 pm
- Re: 1969 deluxe seats...buttons??? - Greg P. 9/10/2008, 9:33 am
  - Re: 1969 deluxe seats...buttons??? - Greg P. 9/11/2008, 9:59 pm
  View all;
08 Bashers, Remember your beach??(large photo) - Tubo 9/11/2008, 9:10 pm
View all; 2 responses, latest posted 9/11/2008, 9:28 pm
- Re: 08 Bashers, Remember your beach??(large photo) - Greg P. 9/11/2008, 9:20 pm
  - Re: 08 Bashers, Remember your beach??(large photo) - Tubo 9/11/2008, 9:28 pm
  View all;
Upper Control Arm Shaft Installation - Matt 9/11/2008, 5:28 pm
View all; 2 responses, latest posted 9/11/2008, 8:12 pm
- Re: Upper Control Arm Shaft Installation - MustangSteve 9/11/2008, 5:35 pm
  - Re: Upper Control Arm Shaft Installation - 6sally6 9/11/2008, 8:12 pm
  View all;
is this strong enough looking? PIC - terelli 9/11/2008, 12:52 pm
View all; 1 response, posted 9/11/2008, 5:37 pm
- Looks like the right stuff to me! - MustangSteve 9/11/2008, 5:37 pm
  View all;
Leaf Spring Rebound Clip Spacers - Matt 9/11/2008, 11:04 am
View all; 1 response, posted 9/11/2008, 5:07 pm
- Re: Leaf Spring Rebound Clip Spacers - Matt 9/11/2008, 5:07 pm
  View all;
OT- MS Fox Ave Car Show - Greg P. 9/10/2008, 8:10 am
View all; 10 responses, latest posted 9/11/2008, 4:10 pm
- I plan on missing it if it looks rainy... - MustangSteve 9/10/2008, 9:45 am
  - There's a Day Show in Denton on Saturday Also.. - Mach1_Ron 9/11/2008, 8:06 am
    - Also a show/swap meet/craft show in Reno, TX this - JerryM 9/11/2008, 8:21 am
      - 1/4 mile past the stoplight.......... - darren 9/11/2008, 8:23 am
        
        Re: Sat. / Up coming shows and events - Greg P. 9/11/2008, 10:08 am
        
        Hmmmmmm.........what have you been up to Darren? - JerryM 9/11/2008, 12:46 pm
      - OT * Paris, TX - Lou 9/11/2008, 11:47 am
        
        Got a name?? - JerryM 9/11/2008, 12:44 pm
        
        Re: Got a name?? - Lou 9/11/2008, 1:26 pm
        
        We're talking a young guy ain't we? If he's under 50 - JerryM 9/11/2008, 4:10 pm
  View all;
1969 Heater Delete - Ron Barkowski 9/11/2008, 12:54 pm
0 responses
69 mustang - joe hermanek 9/7/2008, 9:48 pm
View all; 1 response, posted 9/11/2008, 12:49 pm
- Re: 69 mustang - MustangSteve 9/11/2008, 12:49 pm
  View all;
Carburetor problem - Bruno 9/8/2008, 2:24 pm
View all; 10 responses, latest posted 9/11/2008, 12:47 pm
- Whats been done to your engine... - jersey joe 9/8/2008, 2:43 pm
  - You would be happier with 570 or 600 CFM - MustangSteve 9/9/2008, 7:20 am
    - Re: You would be happier with 570 or 600 CFM - Bruno 9/9/2008, 12:48 pm
- OK, Bruno I'll meet you and Steve at the next Red Light - jersey joe 9/9/2008, 1:56 pm
  - I'd like to show you my stop lights but... - Bruno 9/9/2008, 4:01 pm
    - Holley!! - MustangSteve 9/10/2008, 2:55 pm
      - Re: Holley!! - Bruno 9/11/2008, 2:54 am
- Re: Carburetor problem - steve69 9/10/2008, 9:41 am
  - Re: Carburetor problem - Greg P. 9/11/2008, 10:18 am
    - Re: Carburetor problem - MustangSteve 9/11/2008, 12:47 pm
  View all;
Interesting Lower Control Arm Dilemma - Matt 9/10/2008, 3:35 pm
View all; 6 responses, latest posted 9/11/2008, 10:57 am
- Sounds like you MIGHT have Versailles front spindles - MustangSteve 9/10/2008, 8:42 pm
  - I don't think they are Versailles spindles... - Matt 9/11/2008, 7:22 am
    - Re: I don't think they are Versailles spindles... - MustangSteve 9/11/2008, 7:41 am
      - Re: I don't think they are Versailles spindles... - Matt 9/11/2008, 8:37 am
        
        Re: I don't think they are Versailles spindles... - John Harvey 9/11/2008, 10:00 am
        
        Re: I don't think they are Versailles spindles... - Matt 9/11/2008, 10:57 am
  View all;
Electrical - Graeme Reynolds 9/10/2008, 10:03 pm
View all; 2 responses, latest posted 9/11/2008, 10:49 am
- Re: Electrical - MustangSteve 9/11/2008, 7:37 am
  - Re: Electrical - Graeme Reynolds 9/11/2008, 10:49 am
  View all;
Third try still no windshield in my Galaxie!!!!! :( - Daze 9/9/2008, 6:44 pm
View all; 7 responses, latest posted 9/11/2008, 8:50 am
- Pilkington glass is not the greatest ! - MustangSteve 9/9/2008, 6:59 pm
  - Re: Pilkington glass is not the greatest ! - Loosenut 9/10/2008, 3:13 am
    - Re: Pilkington glass is not the greatest ! - Greg B. 9/10/2008, 9:15 am
  - Re: Pilkington glass is not the greatest ! - cougrnut 9/10/2008, 3:25 pm
    - Daze...was there ever glass in it since you owned it? - MustangSteve 9/10/2008, 8:43 pm
      - Re: Daze...was there ever glass in it since you owned it? - BakoBob 9/10/2008, 11:42 pm
      - The car came with glass, but was cracked. the first... - Daze 9/11/2008, 8:50 am
  View all;
71 mach 1 - Mark Richards 9/10/2008, 10:05 pm
View all; 1 response, posted 9/11/2008, 7:36 am
- Re: 71 mach 1 - MustangSteve 9/11/2008, 7:36 am
  View all;
Just makeing it back from Florida - glenns66 9/10/2008, 9:12 pm
View all; 4 responses, latest posted 9/11/2008, 6:58 am
- Dang Glenn, whatta vacation!! - Tubo 9/10/2008, 9:29 pm
- Glad everything is OK - 65james 9/10/2008, 9:33 pm
- Glad to hear from you.. - jerryF 9/10/2008, 9:44 pm
- Re: Just makeing it back from Florida - Lou 9/11/2008, 6:58 am
  View all;
Bump Steer - Noot 9/6/2008, 6:53 am
View all; 13 responses, latest posted 9/10/2008, 10:05 pm
- Re: Bump Steer - jerryF 9/6/2008, 8:37 am
- Check your toe-in measurement..... - Mr. Tim 9/6/2008, 9:18 am
- Not to nit pick, but what you have isn't bump steer - CraigMBA 9/6/2008, 12:26 pm
  - unless you have 6-cylinder linkage. - jerryF 9/6/2008, 1:37 pm
    - OP doesn't have a '65. He's got a '67 and all those drag links are the same. - CraigMBA 9/6/2008, 8:34 pm
    - On my 64.5 I had less bump-steer with the Granada spindles... - Daze 9/6/2008, 9:27 pm
      - Spindle geometery mismatch is just that - CraigMBA 9/6/2008, 9:45 pm
  - Re: Not to nit pick, but what you have isn't bump steer - ultrastang 9/7/2008, 9:13 pm
    - Certain tires tramline more than others in the same size - CraigMBA 9/7/2008, 9:33 pm
      - Re: Certain tires tramline more than others in the same size - ultrastang 9/7/2008, 11:24 pm
      - I actually got pulled over one time because of tramline! - jerryF 9/10/2008, 10:05 pm
- Ford Dealer - John Ha 9/6/2008, 12:55 pm
- As was already said, the alignment shop probably... - Daze 9/6/2008, 1:23 pm
  View all;
Nice F-100 - Denny 9/9/2008, 3:46 pm
View all; 6 responses, latest posted 9/10/2008, 9:44 pm
- never seen exhaust run like that.n/m - darren 9/9/2008, 3:53 pm
  - Re: never seen exhaust run like that.n/m - Ed Pitts 9/9/2008, 4:45 pm
    - Interesting combination of old and new(er) - Greg B. 9/9/2008, 4:59 pm
      - That is the truck style I really wanted - MustangSteve 9/9/2008, 10:14 pm
        
        Re: That is the truck style I really wanted - Denny 9/10/2008, 8:45 pm
        
        Re: That is the truck style I really wanted - Greg B. 9/10/2008, 9:44 pm
  View all;
Ballpark Swapmeet - JamesW 9/9/2008, 9:12 pm
View all; 2 responses, latest posted 9/10/2008, 8:44 pm
- Re: Ballpark Swapmeet - MustangSteve 9/9/2008, 9:16 pm
  - Re: Ballpark Swapmeet - JamesW 9/10/2008, 8:44 pm
  View all;
Patience Please - Skip 9/8/2008, 8:00 pm
View all; 12 responses, latest posted 9/10/2008, 4:59 pm
- now I want to see the whole car - kurt 9/8/2008, 9:45 pm
  - Re: now I want to see the whole car - Skip 9/8/2008, 10:10 pm
    - Wow! - Jim 9/8/2008, 11:56 pm
    - great car, tell me what - kurt 9/9/2008, 9:00 am
    - Looks nice! - TJ 9/9/2008, 9:32 am
    - Great Mustang!!! n/m - BobC 9/9/2008, 4:11 pm
- A '94 Cobra upper would fix your export brace interference problem - CraigMBA 9/9/2008, 1:07 am
- does the cobra intake have a built in EGR? - jason 5.0 EFI 9/9/2008, 10:05 am
  - Re: does the cobra intake have a built in EGR? - Skip 9/9/2008, 4:59 pm
    - Re: does the cobra intake have a built in EGR? - 66fastback 9/10/2008, 9:25 am
      - Re: does the cobra intake have a built in EGR? - steve69 9/10/2008, 9:31 am
        
        World Product Heads probably..... - 6sally6 9/10/2008, 4:59 pm
  View all;
Which brake pads to use? - Brad 9/10/2008, 8:18 am
View all; 4 responses, latest posted 9/10/2008, 1:04 pm
- Re: Which brake pads to use? - MustangSteve 9/10/2008, 9:46 am
  - Re: Which brake pads to use? - Brad 9/10/2008, 10:05 am
    - The cheapest pads for that particular car - MustangSteve 9/10/2008, 12:38 pm
      - Re: The cheapest pads for that particular car - lowercasesteve 9/10/2008, 1:04 pm
  View all;
Rear detailing and suspension questions. - Jon Lee 9/9/2008, 10:33 pm
View all; 6 responses, latest posted 9/10/2008, 12:57 pm
- Re: Rear detailing and suspension questions. - lowercasesteve 9/10/2008, 12:32 am
  - Re: Rear detailing and suspension questions. - Jon Lee 9/10/2008, 1:19 am
    - Re: after thought on "Rear detailing and suspension questions." - GT/CS Mike 9/10/2008, 1:34 am
    - Re: Rear detailing and suspension questions. - lowercasesteve 9/10/2008, 12:57 pm
- Re: Rear detailing and suspension questions. - GT/CS Mike 9/10/2008, 1:26 am
  - Thank you n/m - Jon Lee 9/10/2008, 10:44 am
  View all;
Carb and project pics............. - Iron Maiden 8/16/2008, 10:12 am
View all; 25 responses, latest posted 9/10/2008, 12:51 pm
- Hope it runs as good as it looks! - BobC 8/16/2008, 10:39 am
- Re: Carb and project pics............. - Lou 8/16/2008, 11:37 am
- Re: Carb and project pics............. - Rudi 8/16/2008, 11:49 am
- Looks great. Nice progress. do you have a stick or automatic? - MarkinNJ 8/16/2008, 12:28 pm
  - Lou, I ended up keeping the correct orientation on the pistons......................... - Iron Maiden 8/16/2008, 12:48 pm
    - How does the kickdown feature work on the 77 c4? - MarkinNJ 8/16/2008, 1:52 pm
- Re: Carb and project pics............. - Greg B. 8/16/2008, 12:52 pm
  - Re: Carb and project pics............. - Iron Maiden 8/16/2008, 3:06 pm
    - Re: Carb and project pics............. - Greg B. 8/16/2008, 3:20 pm
    - Is that a stock intake? - MarkinNJ 8/16/2008, 4:03 pm
      - Re: Is that a stock intake? - Iron Maiden 8/16/2008, 10:23 pm
    - Transmission - John Ha 8/17/2008, 5:57 am
      - Re: Transmission - Iron Maiden 8/17/2008, 8:44 am
        
        Re: Transmission - John Ha 8/18/2008, 4:44 pm
- Re: Carb and project pics............. - Jim 8/16/2008, 5:50 pm
- Looking good, now would be a good time for some motor mount shots..hint hint................ - T.McG/393 8/16/2008, 6:16 pm
  - Re: Looking good, now would be a good time for some motor mount shots..hint hint................ - Iron Maiden 8/17/2008, 10:50 pm
    - Email would be fine, thanks. - T.McG/393 8/18/2008, 6:45 am
- Re: Carb and project pics............. - MustangSteve 8/17/2008, 11:19 am
  - Hey Iron Maiden.... - 6sally6 8/18/2008, 8:46 am
    - Re: Hey Iron Maiden.... - Iron Maiden 8/18/2008, 8:03 pm
- Re: Carb and project pics............. - STEVE69 8/18/2008, 11:38 am
  - Test for top of the page post - Ron68 9/10/2008, 10:08 am
    - Ron68, do you have this thread "espanded" with a "-" sign? - MarkinNJ 9/10/2008, 10:17 am
      - Re: Ron68, do you have this thread "espanded" with a "-" sign? - Ron68 9/10/2008, 12:51 pm
  View all;
Rack and pinion - Mark W 9/8/2008, 1:35 pm
View all; 5 responses, latest posted 9/10/2008, 12:27 pm
- Re: Rack and pinion - Gant 9/8/2008, 4:21 pm
  - Re: Rack and pinion - Gant 9/8/2008, 4:22 pm
    - Re: Rack and pinion - beytzim 9/10/2008, 12:25 am
      - Re: Rack and pinion - Mark W 9/10/2008, 11:48 am
- Re: Rack and pinion - MustangSteve 9/10/2008, 12:27 pm
  View all;
Damn it!!!! - JeffL 9/6/2008, 12:06 pm
View all; 22 responses, latest posted 9/10/2008, 9:39 am
- OMG! The rod bolts get torqued that high! - CraigMBA 9/6/2008, 12:14 pm
  - I used somewhere around 15 ft lbs - jerryF 9/6/2008, 1:31 pm
    - If it's a single 4 BBL. manifold................ - jersey joe 9/6/2008, 3:37 pm
      - Re: Double Damn it !! - Greg P. 9/6/2008, 4:52 pm
        
        Re: Double Damn it !! - JeffL 9/6/2008, 5:36 pm
        
        Re: Double Damn it !! - Rudi 9/7/2008, 10:32 am
      - Re: If it's a single 4 BBL. manifold................ - JeffL 9/6/2008, 5:34 pm
- 289 heads, right? - MustangSteve 9/6/2008, 5:11 pm
  - Re: 289 heads, right? - JeffL 9/6/2008, 5:27 pm
    - Re: 289 heads, right? - MustangSteve 9/6/2008, 7:37 pm
      - Re: 289 heads, right? - JeffL 9/6/2008, 7:52 pm
- Re: Damn it!!!! - JeffL 9/6/2008, 5:32 pm
  - Re: Damn it!!!! - MustangSteve 9/6/2008, 7:38 pm
    - Re: Damn it!!!! - JeffL 9/6/2008, 7:43 pm
      - Glue the gaskets to the heads with Super 77 or - CraigMBA 9/6/2008, 8:30 pm
      - You blew it - MustangSteve 9/6/2008, 9:18 pm
        
        Re: You blew it - JeffL 9/7/2008, 9:22 am
        
        Learn from it and move on - MustangSteve 9/7/2008, 10:22 am
  - Re: Damn it!!!! - Jonathan White 9/9/2008, 10:02 am
    - Re: Damn it!!!! - JeffL 9/9/2008, 6:55 pm
- Re: Damn it!!!! - Kristang 9/6/2008, 9:44 pm
  - Re: Damn it!!!! - steve69 9/10/2008, 9:39 am
  View all;
Bullit wheel color - Olin 9/6/2008, 4:28 pm
View all; 3 responses, latest posted 9/10/2008, 9:31 am
- Re: Bullit wheel color - P J Moran 9/8/2008, 10:30 am
- Re: Bullit wheel color - Marlon 9/8/2008, 11:03 am
  - Re: Bullit wheel color - Olin 9/10/2008, 9:31 am
  View all;
Air Cleaners - Doug Spies 9/8/2008, 9:42 am
View all; 2 responses, latest posted 9/10/2008, 9:10 am
- Re: Air Cleaners - T.McG/393 9/8/2008, 7:14 pm
  - Re: Air Cleaners - Greg P. 9/10/2008, 9:10 am
  View all;
Header Heat Woes - Skip 9/6/2008, 3:01 pm
View all; 17 responses, latest posted 9/10/2008, 8:30 am
- Re: Header Heat Woes - Lou 9/6/2008, 4:51 pm
  - Re: Header Heat Woes - Greg P. 9/6/2008, 5:08 pm
    - Re: Header Heat Woes - Skip 9/6/2008, 6:11 pm
- Re: Header Heat Woes - Denny 9/6/2008, 6:46 pm
  - Re: Header Heat Woes - Skip 9/6/2008, 6:56 pm
    - Re: Header Heat Woes - Denny 9/6/2008, 7:02 pm
      - Re: Header Heat Woes - Skip 9/7/2008, 1:12 am
        
        Check timing first - CraigMBA 9/7/2008, 3:01 am
        
        Re: Check timing first - Skip 9/7/2008, 9:07 am
        
        Re: Check timing first - 66fastback 9/7/2008, 9:25 am
- Are your plug wires sitting on the headers? - John Ha 9/7/2008, 5:24 am
  - Re: Are your plug wires sitting on the headers? - Skip 9/7/2008, 9:10 am
- Re: Header Heat Woes - 66fastback 9/7/2008, 9:22 am
  - Re: Header Heat Woes - Skip 9/7/2008, 11:31 am
    - Re: Header Heat Woes - 66fastback 9/7/2008, 8:59 pm
  - I thought I was the only one who had to clearance his JBA headers - CraigMBA 9/9/2008, 1:20 am
    - Re: Header Woes ! Q & A - Greg P. 9/10/2008, 8:30 am
  View all;
pulley kit selection "performance ratio" - kurt 9/9/2008, 11:34 am
View all; 3 responses, latest posted 9/10/2008, 7:37 am
- part links - kurt 9/9/2008, 3:38 pm
  - march pulley link (sorry bad link above) - kurt 9/9/2008, 3:41 pm
    - Re: march pulley link (sorry bad link above) - Mach1_Ron 9/10/2008, 7:37 am
  View all;
1967 GT500 instrument cluster related......................... - Mustsed 9/9/2008, 1:52 am
View all; 2 responses, latest posted 9/10/2008, 3:37 am
- Re: 1967 GT500 instrument cluster related......................... - MustangSteve 9/9/2008, 9:21 pm
  - Thanks Steve.................................n/m - Mustsed 9/10/2008, 3:37 am
  View all;
NEED WHEELS - mike 9/9/2008, 8:10 pm
View all; 1 response, posted 9/9/2008, 9:17 pm
- Re: NEED WHEELS - MustangSteve 9/9/2008, 9:17 pm
  View all;
Preserving Rubber Bushings - Matt 9/9/2008, 4:47 am
View all; 5 responses, latest posted 9/9/2008, 8:17 pm
- Ozone attacks rubber - MustangSteve 9/9/2008, 7:12 am
- When i have to store things like this............................ - Mustsed 9/9/2008, 9:53 am
  - Silicone Grease - stanger53 9/9/2008, 6:55 pm
    - Re: Silicone Grease - Rudi 9/9/2008, 7:28 pm
- I have a good trick for renewing old brittle rubber... - Daze 9/9/2008, 8:17 pm
  View all;
Aluminum radiator from Steve... - JeffL 9/9/2008, 7:01 pm
0 responses
MarkinNJ/Others...how do you post a picture - jersey joe 9/9/2008, 9:49 am
View all; 6 responses, latest posted 9/9/2008, 6:21 pm
- short version below. I will email the long version with the screenshots when I get home. - MarkinNJ 9/9/2008, 10:25 am
  - Re: short version below. I will email the long version with the screenshots when I get home. - jersey joe 9/9/2008, 11:27 am
    - I sent you an email with the instructions on how to post pics - MarkinNJ 9/9/2008, 4:46 pm
    - Thanks Mark..............................................n/m - jersey joe 9/9/2008, 6:21 pm
- here are some detailed instructions - Daze 9/9/2008, 10:42 am
  - Thanks Daze...................................... - jersey joe 9/9/2008, 11:32 am
  View all;
8 inch rear vibration - Jeff K Freeman 9/3/2008, 9:40 am
View all; 8 responses, latest posted 9/9/2008, 6:02 pm
- Re: 8 inch rear vibration - MustangSteve 9/3/2008, 2:52 pm
  - Re: 8 inch rear vibration - lowercasesteve 9/3/2008, 11:13 pm
- Re: 8 inch rear vibration - Al Newman 9/3/2008, 10:51 pm
  - Re: 8 inch rear vibration - Jeff K Freeman 9/7/2008, 2:19 pm
    - Re: 8 inch rear vibration - ultrastang 9/8/2008, 12:48 am
      - Re: 8 inch rear vibration - Jeff K Freeman 9/9/2008, 8:03 am
        
        Re: 8 inch rear vibration - jerryF 9/9/2008, 8:34 am
- Just wondering - Jim 9/9/2008, 6:02 pm
  View all;
PHOTO OF SPARK ARM - Kevin,M 9/8/2008, 9:10 pm
View all; 3 responses, latest posted 9/9/2008, 5:05 pm
- Re: PHOTO OF SPARK ARM - Skip 9/8/2008, 9:38 pm
  - Re: PHOTO OF SPARK ARM - Kevin,M 9/9/2008, 5:28 am
    - Re: PHOTO OF SPARK ARM - Skip 9/9/2008, 5:05 pm
  View all;
Will a 5.0 fit into a 68 MUstang - john Montreuil 9/9/2008, 12:02 pm
View all; 5 responses, latest posted 9/9/2008, 4:59 pm
- Re: Will a 5.0 fit into a 68 MUstang - Technocal 9/9/2008, 12:10 pm
  - Re: Will a 5.0 fit into a 68 MUstang - john Montreuil 9/9/2008, 12:17 pm
    - Use the old 302 timing cover and oil pan - MustangSteve 9/9/2008, 1:34 pm
- Re: Will a 5.0 fit into a 68 MUstang - John Z 9/9/2008, 3:44 pm
- Re: Will a 5.0 fit into a 68 MUstang - Richard 9/9/2008, 4:59 pm
  View all;