[ Post your Mustang question | MustangSteve.com - click here ]

FYI FORD

MustangSteve's

Ford Mustang Forum

The Internet's Most Knowledgeable Classic Mustang Information

IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE

MustangSteve has over 30 years of Mustang experience, having owned 19 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify (Especially Modify) their Mustang....THERE ARE NO DUMB QUESTIONS!!!!!

Visit MustangSteve's web site to view some of my work and find details for:

FYIFORD Contributors' PICTURES

Power Brake Retrofit Kits for 65-66 Stangs

Classic Mustang FAQ's by MustangSteve

How to wire in a Duraspark Ignition

Mustang Ride Height Pictures and Descriptions

Steel Bushings to fit Granada Spindles to Mustang Tie Rods

BUY or SELL Mustangs and Parts on MustangSteve's SWAP MEET Page

Vist my EBAY store MustangSteve Performance

How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page

FYIFORD Acronyms for guide to all the acronyms used on this page

FYIFORD Important information and upcoming events

Map shows where all the contributors are located - ADD YOURS

MustangSteve's LAW of Automotive Repair and Restoration:

Any automotive repair or restoration will take twice as long and cost twice as much as originally planned, even after careful prior consideration of MustangSteve's LAW

You are not currently logged in.
Login:	Register To Post Messages on FYIFORD
Username:	Password:
Remember me for:

Users active in the last 15 minutes: Don, Rudi, fishinjeff, 1 hidden.

Time 11/24/2009, 8:29 am

Page:

1 2 3 4 5 6 ... Last

Message Archive

cable for a 65 clutch conversion kit - Dave 11/16/2009, 3:19 pm
View all; 3 responses, latest posted 11/16/2009, 5:08 pm
- Re: cable for a 65 clutch conversion kit - darren 11/16/2009, 3:50 pm
  - Re: cable for a 65 clutch conversion kit - Dave 11/16/2009, 3:53 pm
    - This was answered by email earlier today - MustangSteve 11/16/2009, 5:08 pm
  View all;
starter & power r&p - 1fststang 11/15/2009, 6:11 pm
View all; 9 responses, latest posted 11/16/2009, 4:48 pm
- I have a 1993 starter - CraigMBA 11/15/2009, 6:21 pm
  - Re: I have a 1993 starter - 1fststang 11/15/2009, 8:32 pm
    - None. - CraigMBA 11/15/2009, 10:46 pm
- Re: starter & power r&p - ltret98 11/15/2009, 7:24 pm
  - Re: starter & power r&p - Brent 11/16/2009, 9:35 am
- Re: starter & power r&p - Dan 11/15/2009, 8:20 pm
  - can you confirm - 1fststang 11/15/2009, 8:34 pm
    - Re: can you confirm - Dan 11/16/2009, 4:48 pm
- Re: starter & power r&p - MustangSteve 11/15/2009, 9:53 pm
  View all;
What do you guys think of my new UCA drop templates??? - Daze 11/12/2009, 6:47 pm
View all; 16 responses, latest posted 11/16/2009, 4:24 pm
- Re: What do you guys think of my new UCA drop templates??? - t 11/12/2009, 7:18 pm
  - Rater then go in to all the details, check out... - Daze 11/12/2009, 7:31 pm
    - Re: Rater then go in to all the details, check out... - t 11/12/2009, 8:05 pm
      - Everyone should do this mod on thier Mustang unless they have a MCA chalkmark car - CraigMBA 11/12/2009, 8:21 pm
        
        Does it still work with the Granada Spingles? n/m - MTSteve 11/13/2009, 3:10 pm
        
        Works with ALL spindle configurations. As Craig said EVERY Mustang on the road... - Daze 11/13/2009, 4:17 pm
- Those are great, but one more idea... - MustangSteve 11/12/2009, 10:16 pm
  - Thought about it, The ones I was making before were 1/16" steel - Daze 11/12/2009, 10:24 pm
    - OKYDOKEY - MustangSteve 11/12/2009, 10:31 pm
      - I know exactly what you are talking about. The aluminum is the cheep part... - Daze 11/12/2009, 10:41 pm
        
        Re: I know exactly what you are talking about. The aluminum is the cheep part... - JamesW 11/13/2009, 6:31 am
        
        Its all about time - Daze 11/13/2009, 9:02 am
        
        Re: Its all about time - Steve69 11/13/2009, 9:10 am
- Arrow ?? - Denny 11/13/2009, 4:39 pm
  - The arrow points to the back of the car and the paperwork that comes... - Daze 11/13/2009, 4:57 pm
  - Re: Arrow ?? - John Harvey 11/16/2009, 4:24 pm
  View all;
air/fuel mixture screws - ernest 11/16/2009, 12:17 pm
View all; 3 responses, latest posted 11/16/2009, 4:09 pm
- Re: air/fuel mixture screws - Al Newman 11/16/2009, 1:48 pm
  - its an edelbrock - ernest 11/16/2009, 1:53 pm
    - Re: its an edelbrock - Ted 11/16/2009, 4:09 pm
  View all;
Emerald Coast Cruisin - Tubo 11/16/2009, 7:24 am
View all; 2 responses, latest posted 11/16/2009, 11:28 am
- Where's the Pix????..................nm - Bullet Bob 11/16/2009, 10:07 am
  - You'da tunk, with 2000 or so cars there, I coulda found a couple to take shots of. - Tubo 11/16/2009, 11:28 am
  View all;
AOD Conversion/Tri-y Headers - TerryM 11/15/2009, 7:35 pm
View all; 3 responses, latest posted 11/16/2009, 8:53 am
- We have an AOD in our 66 HT.... - Bullet Bob 11/15/2009, 8:48 pm
- Most Tri-Y's require some modification to fit. - Tubo 11/16/2009, 6:39 am
  - Re: Most Tri-Y's require some modification to fit. - Rudi 11/16/2009, 8:53 am
  View all;
89 5.0 running hot - dave 11/13/2009, 4:44 pm
View all; 10 responses, latest posted 11/16/2009, 7:51 am
- Re: 89 5.0 running hot - Fred 11/13/2009, 4:58 pm
- Re: 89 5.0 running hot - Brian68 11/13/2009, 6:37 pm
  - Re: 89 5.0 running hot - dave 11/13/2009, 8:13 pm
    - Re: 89 5.0 running hot - Brian68 11/13/2009, 10:43 pm
      - Did you change to the early style timing cover? - MustangSteve 11/14/2009, 3:05 pm
        
        Re: Did you change to the early style timing cover? - dave 11/15/2009, 8:48 am
        
        Re: Did you change to the early style timing cover? - MustangSteve 11/15/2009, 9:38 am
        
        Thanks Steve,...loosk like this may have worked though... - dave 11/15/2009, 6:23 pm
        
        Re: Thanks Steve,...loosk like this may have worked though... - Brian68 11/15/2009, 8:26 pm
        
        Use to the early style timing cover?...Why not? - Tubo 11/16/2009, 7:51 am
  View all;
Should I paint new HiPo exhaust manifolds - WI - Jeff 11/15/2009, 1:17 pm
View all; 4 responses, latest posted 11/15/2009, 8:39 pm
- With a set of new NPD Hi-Po manifolds.... - Bullet Bob 11/15/2009, 1:49 pm
  - Re: With a set of new NPD Hi-Po manifolds.... - MustangSteve 11/15/2009, 5:43 pm
    - Re: With a set of new NPD Hi-Po manifolds.... - Jim Bowie 11/15/2009, 8:19 pm
    - +1 ceramic coating is a really good way to go. one of the biggest... - Daze 11/15/2009, 8:39 pm
  View all;
Pinched - Don 11/15/2009, 9:20 am
View all; 2 responses, latest posted 11/15/2009, 6:02 pm
- At 1,000 PSI, the hose will open up when necessary. - MustangSteve 11/15/2009, 5:14 pm
  - nope - Don 11/15/2009, 6:02 pm
  View all;
strut rod support brackets - Keith 11/14/2009, 7:16 pm
View all; 2 responses, latest posted 11/15/2009, 1:01 pm
- Re: strut rod support brackets - MustangSteve 11/15/2009, 11:56 am
  - Re: strut rod support brackets - Keith 11/15/2009, 1:01 pm
  View all;
Ebony & Silver on page 36 in Dec. Mustang Monthly............ - T.McG/393 11/15/2009, 12:27 pm
0 responses
Best Ford commercial EVER - darren 11/14/2009, 7:30 am
View all; 7 responses, latest posted 11/15/2009, 11:59 am
- Re: Best Ford commercial EVER - Greg B 11/14/2009, 9:52 am
- I LOVED IT/... - BILLY WALTON from GEORGIA 11/14/2009, 10:36 am
  - That's been around a while. - Loosenut 11/14/2009, 2:39 pm
    - Re: That's been around a while. - JamesW 11/14/2009, 6:11 pm
      - THIS is the best Ford commercial ever...... - Loosenut 11/15/2009, 11:23 am
        
        You right!!............nm - Bullet Bob 11/15/2009, 11:59 am
- Not the best Ford commercial EVER - Pete M 11/14/2009, 4:28 pm
  View all;
Hot Rod Tv Sat 14th. - Greg B 11/14/2009, 9:07 am
View all; 5 responses, latest posted 11/15/2009, 11:55 am
- Re: Hot Rod Tv Sat 14th. - Hakan 11/14/2009, 9:51 am
  - Re: Hot Rod Tv Sat 14th. - Greg B 11/14/2009, 9:59 am
    - Re: Hot Rod Tv Sat 14th. - Hakan 11/14/2009, 12:27 pm
      - Wish I had a pile of cash - Loosenut 11/15/2009, 11:31 am
        
        Loosenut, you have a PM.....nm - Bullet Bob 11/15/2009, 11:55 am
  View all;
1968 brakes - paul browning 11/14/2009, 9:53 pm
View all; 2 responses, latest posted 11/15/2009, 11:50 am
- F�rst off all I assume you did the reasearch and know...... - Mustsed 11/15/2009, 12:51 am
  - Since you really need a disc brake master cylinder (+pic of RP valve) - MustangSteve 11/15/2009, 11:50 am
  View all;
spring perches - 66carboncobra 11/8/2009, 5:49 am
View all; 17 responses, latest posted 11/15/2009, 11:34 am
- Re: spring perches - MustangSteve 11/8/2009, 9:19 am
  - With the roller perches it doesn't matter. - CraigMBA 11/8/2009, 12:46 pm
    - Re: With the roller perches it doesn't matter. - 66carboncobra 11/9/2009, 4:22 am
      - Re: With the roller perches it doesn't matter. - MustangSteve 11/9/2009, 5:56 pm
        
        The spring is centered over the shaft... at lest in theory - Daze 11/9/2009, 6:30 pm
        
        Considering the 79-2004 Mustang ... - MustangSteve 11/9/2009, 7:59 pm
- Re: spring perches - 66CARBONCOBRA 11/10/2009, 11:14 pm
  - Yes, that will affect ride height - MustangSteve 11/11/2009, 5:39 pm
- Re: Roller spring perches Install question - Brent 11/13/2009, 8:30 am
  - It is well worth the 15 minutes it takes to remove the UCAs, and here is why... - Daze 11/13/2009, 10:02 am
    - Re: It is well worth the 15 minutes it takes to remove the UCAs, and here is why... - Brent 11/13/2009, 10:08 am
      - I am not sure the year of your car... - Daze 11/13/2009, 10:17 am
        
        Re: I am not sure the year of your car... - Brent 11/13/2009, 10:23 am
        
        you should be able to pull it strait out. Let me know if I can help further n/m - Daze 11/13/2009, 10:25 am
        
        Brent.... Do you have aftermarket springs? - MustangSteve 11/13/2009, 5:54 pm
    - Re: It is well worth the 15 minutes it takes to remove the UCAs, and here is why... - Mike Walters 11/13/2009, 2:23 pm
      - Re: Smooth Install, sort of... - Brent 11/15/2009, 11:34 am
  View all;
Adjustable Strut Rods 68 Mustang - Brent 11/9/2009, 10:01 am
View all; 16 responses, latest posted 11/15/2009, 11:23 am
- Re: Adjustable Strut Rods 68 Mustang - Alanb 11/9/2009, 11:59 am
  - Re: Adjustable Strut Rods 68 Mustang - Brent 11/9/2009, 12:02 pm
    - Re: Adjustable Strut Rods 68 Mustang - Alanb 11/9/2009, 12:04 pm
      - Re: Adjustable Strut Rods 68 Mustang - Brent 11/9/2009, 12:14 pm
        
        Re: Adjustable Strut Rods 68 Mustang - John Harvey 11/12/2009, 9:08 am
- Re: Adjustable Strut Rods 68 Mustang - Brent 11/9/2009, 12:40 pm
  - Re: Adjustable Strut Rods 68 Mustang - Richard 11/10/2009, 2:18 pm
    - Re: Adjustable Strut Rods 68 Mustang - Glen's 1965 5.0 11/10/2009, 9:59 pm
      - Re: Adjustable Strut Rods 68 Mustang - Richard 11/11/2009, 8:25 am
        
        Re: Adjustable Strut Rods 68 Mustang - hmartin025 11/11/2009, 8:50 am
        
        Re: Adjustable Strut Rods 68 Mustang - Richard 11/11/2009, 8:57 am
        
        Nope...... - 6sally6 11/11/2009, 9:20 am
        
        Re: Nope...... - Richard 11/11/2009, 9:29 am
- Re: Adjustable Strut Rods 68 Mustang - MustangSteve 11/11/2009, 4:59 pm
  - Re: Adjustable Strut Rods 68 Mustang - cugman 11/11/2009, 9:36 pm
- removed eom - Brent 11/15/2009, 11:23 am
  View all;
68 fastback - Lars 11/13/2009, 6:03 pm
View all; 11 responses, latest posted 11/15/2009, 9:17 am
- There's nothing to think about ...BUY IT - jerseyjoe 11/13/2009, 6:07 pm
  - Re: There's nothing to think about ...BUY IT - Lars 11/13/2009, 6:20 pm
    - Well...I could bring over a 6 PACK......... - jerseyjoe 11/13/2009, 6:34 pm
- Re: 68 fastback - Brian 11/13/2009, 9:09 pm
- Re: 68 fastback - MustangSteve 11/13/2009, 9:40 pm
  - Re: 68 fastback - Lars 11/14/2009, 6:51 am
    - Re: 68 fastback...look for the 02 in the vin for F/B - jerseyjoe 11/14/2009, 7:02 am
      - Re: 68 fastback...look for the 02 in the vin for F/B - Lars 11/14/2009, 7:31 am
        
        Re: 68 fastback...look for the 02 in the vin for F/B - Lars 11/14/2009, 12:50 pm
        
        Any more Captain Morgan left ? - jerseyjoe 11/14/2009, 3:33 pm
        
        Re: Any more Captain Morgan left ? - Lars 11/15/2009, 9:17 am
  View all;
351w oil capacity - dave in mckinney 11/14/2009, 8:02 am
View all; 7 responses, latest posted 11/15/2009, 9:13 am
- Did you start it? - CraigMBA 11/14/2009, 9:52 am
  - Re: Did you start it? - dave in mckinney 11/14/2009, 11:43 am
    - The dipstick is off - CraigMBA 11/14/2009, 11:53 am
      - Re: The dipstick is off - MustangSteve 11/14/2009, 12:45 pm
        
        Re: The dipstick is off - dave in mckinney 11/15/2009, 9:03 am
        
        Re: The dipstick is off - dave in mckinney 11/15/2009, 9:07 am
        
        Re: Keep that one in good shape - Lars 11/15/2009, 9:13 am
  View all;
Lincoln Mark VII LSC engine swap - silverbluefastback 11/14/2009, 6:05 am
View all; 12 responses, latest posted 11/15/2009, 9:05 am
- Re: Lincoln Mark VII LSC engine swap - darren 11/14/2009, 10:32 am
  - I think everything you need has been covered here - MustangSteve 11/14/2009, 11:02 am
    - Re: I think everything you need has been covered here - Mike Walters 11/14/2009, 5:04 pm
  - Re: Lincoln Mark VII LSC engine swap - silverbluefastback 11/15/2009, 7:19 am
- Re: Lincoln Mark VII LSC engine swap - Brian68 11/14/2009, 7:33 pm
  - Re: Lincoln Mark VII LSC engine swap - ultrastang 11/14/2009, 10:39 pm
    - Re: Lincoln Mark VII LSC engine swap - hmartin025 11/15/2009, 8:29 am
      - Yes, they are different which can be seen at ebay...... - Mustsed 11/15/2009, 8:41 am
- I did a 1990 LTC EFI into a 289 swap and............. - Mustsed 11/15/2009, 12:40 am
- Re: Lincoln Mark VII LSC engine swap - silverbluefastback 11/15/2009, 7:11 am
  - Delete last thread, found it! - silverbluefastback 11/15/2009, 7:28 am
  - Re: Lincoln Mark VII LSC engine swap - Bullet Bob 11/15/2009, 9:05 am
  View all;
duraspark wiring '84 mustang - mike york 11/14/2009, 3:20 pm
View all; 1 response, posted 11/15/2009, 1:00 am
- On top of this page are............. - Mustsed 11/15/2009, 1:00 am
  View all;
Booster and brake switch problem on 65 - Jim 11/14/2009, 7:56 pm
View all; 3 responses, latest posted 11/14/2009, 10:14 pm
- Re: Booster and brake switch problem on 65 - MustangSteve 11/14/2009, 8:34 pm
  - Re: Booster and brake switch problem on 65 - Jim 11/14/2009, 10:14 pm
- Re: Booster and brake switch problem on 65 - hmartin025 11/14/2009, 8:47 pm
  View all;
05-09 Rear Brakes on 66 Mustang 8 " Help? - Chris Eves 11/10/2009, 7:16 pm
View all; 16 responses, latest posted 11/14/2009, 8:35 pm
- Re: 05-09 Rear Brakes on 66 Mustang 8 " Help? - MustangSteve 11/10/2009, 8:09 pm
  - Re: 05-09 Rear Brakes on 66 Mustang 8 " Help? - Chris Eves 11/10/2009, 8:18 pm
    - Re: 05-09 Rear Brakes on 66 Mustang 8 " Help? - MustangSteve 11/10/2009, 10:01 pm
      - Re: 05-09 Rear Brakes on 66 Mustang 8 " Help? - Chris Eves 11/10/2009, 10:41 pm
        
        1.25 Spacer - Ramses 11/10/2009, 10:44 pm
        
        Re: 1.25 Spacer - Ramses 11/10/2009, 10:48 pm
        
        Re: 1.25 Spacer - MustangSteve 11/11/2009, 5:45 pm
        
        Re: 1.25 Spacer - Ramses 11/11/2009, 7:21 pm
        
        Ask the experts before ordering expensive parts! - MustangSteve 11/11/2009, 9:11 pm
        
        Maybe no????? Fine print below that... - MustangSteve 11/11/2009, 5:42 pm
    - Juat ask the guy... - BobN 11/12/2009, 10:03 am
- Re: 05-09 Rear Brakes on 66 Mustang 8 " Help? - chris eves 11/13/2009, 12:07 pm
  - Summit has them!!! Here is the part number - MustangSteve 11/13/2009, 5:57 pm
    - Re: Summit has them!!! Here is the part number - ramses 11/13/2009, 11:29 pm
      - Returrned WHAT, Ramses? - MustangSteve 11/14/2009, 1:38 pm
      - Whoops wrong post> - ramses 11/14/2009, 8:35 pm
  View all;
master cylinder leaking out the top - AlanB 11/8/2009, 9:53 pm
View all; 4 responses, latest posted 11/14/2009, 3:21 pm
- Re: master cylinder leaking out the top - hmartin025 11/9/2009, 1:59 pm
  - Re: master cylinder leaking out the top - AlanB 11/9/2009, 5:14 pm
    - Re: master cylinder leaking out the top - MustangSteve 11/9/2009, 6:25 pm
      - Re: master cylinder leaking out the top - AlanB 11/14/2009, 3:21 pm
  View all;
Installed a set of adjustable engine mounts today. - Daze 11/12/2009, 9:38 pm
View all; 7 responses, latest posted 11/14/2009, 3:02 pm
- Re: Installed a set of adjustable engine mounts today. - Brent 11/13/2009, 11:13 am
- Re: Installed a set of adjustable engine mounts today. - Fred 11/13/2009, 12:39 pm
- Re: Installed a set of adjustable engine mounts today. - T.McG/393 11/13/2009, 12:45 pm
  - I think the third bolt is redundent - Daze 11/13/2009, 1:16 pm
- Re: Installed a set of adjustable engine mounts today. - Brian68 11/13/2009, 6:39 pm
  - Re: Installed a set of adjustable engine mounts today. - Chris V 11/14/2009, 2:27 am
    - I see on a drag car that those would be benificial - MustangSteve 11/14/2009, 3:02 pm
  View all;
pony door lights - Clint B 11/14/2009, 10:58 am
View all; 3 responses, latest posted 11/14/2009, 1:49 pm
- Re: pony door lights - MustangSteve 11/14/2009, 12:48 pm
  - Re: pony door lights - Clint B 11/14/2009, 1:26 pm
    - Re: pony door lights - MustangSteve 11/14/2009, 1:49 pm
  View all;
65 brakes - t 11/12/2009, 8:50 pm
View all; 5 responses, latest posted 11/14/2009, 1:39 pm
- PLEASE!!!! - MustangSteve 11/12/2009, 10:13 pm
  - Re: PLEASE!!!! - t 11/13/2009, 4:40 pm
    - Rear discs are not really necessary if safety is the priority - MustangSteve 11/13/2009, 5:49 pm
      - Re: Rear discs are not really necessary if safety is the priority - Joe Ward 11/13/2009, 11:15 pm
        
        Done, Joe - MustangSteve 11/14/2009, 1:39 pm
  View all;
rear end lube - Tim42 11/13/2009, 10:16 pm
View all; 3 responses, latest posted 11/14/2009, 11:17 am
- Re: rear end lube - Al Newman 11/14/2009, 5:19 am
  - Re: rear end lube - Kristang 11/14/2009, 7:40 am
    - Re: rear end lube - Tim42 11/14/2009, 11:17 am
  View all;
wiring and running problem!! - John 50 11/14/2009, 7:50 am
View all; 1 response, posted 11/14/2009, 9:33 am
- Re: wiring and running problem!! - hmartin025 11/14/2009, 9:33 am
  View all;
Master cylinder push rod length - Joe Ward 11/12/2009, 10:40 pm
View all; 4 responses, latest posted 11/13/2009, 10:39 pm
- Re: Master cylinder push rod length - hmartin025 11/13/2009, 1:33 am
  - Re: Master cylinder push rod length - Joe 11/13/2009, 12:38 pm
    - Re: Master cylinder push rod length - MustangSteve 11/13/2009, 5:56 pm
- Re: Master cylinder push rod length - Joe Ward 11/13/2009, 10:39 pm
  View all;
Door Hinge Repair Kits - Kristang 11/12/2009, 7:20 pm
View all; 4 responses, latest posted 11/13/2009, 6:04 pm
- Re: Door Hinge Repair Kits - hmartin025 11/12/2009, 10:20 pm
  - Re: Door Hinge Repair Kits - MustangSteve 11/12/2009, 10:34 pm
    - Re: Door Hinge Repair Kits - kristang 11/13/2009, 7:46 am
      - Just lube well... - MustangSteve 11/13/2009, 6:04 pm
  View all;
Tools and Their REAL Uses - Steve69 11/13/2009, 10:59 am
View all; 2 responses, latest posted 11/13/2009, 5:01 pm
- Re: Tools and Their REAL Uses - t 11/13/2009, 4:46 pm
- Thats funny stuff and so true!!..N/M - Doug G 11/13/2009, 5:01 pm
  View all;
2500 stall. Stalls early - Eric 11/10/2009, 10:16 pm
View all; 4 responses, latest posted 11/13/2009, 1:32 pm
- Re: 2500 stall. Stalls early - kurts65coupe 11/10/2009, 11:34 pm
- Re: 2500 stall. Stalls early - Mach1_Ron 11/11/2009, 7:33 am
- What about if you idle it down some? - 6sally6 11/11/2009, 9:45 am
- Re: 2500 stall. Stalls early - John Bednorz 11/13/2009, 1:32 pm
  View all;
Found a good hyd clutch system I think - Jay 11/12/2009, 10:34 am
View all; 11 responses, latest posted 11/13/2009, 11:02 am
- Daze has one right now - CraigMBA 11/12/2009, 11:37 am
  - Re: Daze has one right now - Arjan 11/12/2009, 3:02 pm
    - The biggest problem with a hydraulic throwout bearing is $$$$ n/m - Daze 11/12/2009, 4:49 pm
      - That's why I wondered about the one from the Mustang - Arjan 11/13/2009, 3:51 am
- This is what I sell - Daze 11/12/2009, 4:57 pm
  - Re: This is what I sell - Ron 11/12/2009, 7:11 pm
    - Hey Daze, Will this setup work for 69 Mustang - Steve69 11/13/2009, 9:07 am
      - yes, you may need to do a little fabrication to get the pedal attached... - Daze 11/13/2009, 9:18 am
        
        Re: yes, you may need to do a little fabrication to get the pedal attached... - Steve69 11/13/2009, 9:52 am
        
        Have you seen James W's web page on the subject?? it will give you an idea... - Daze 11/13/2009, 9:58 am
- Re: Found a good hyd clutch system I think - Steve69 11/13/2009, 11:02 am
  View all;
Unisteer is offering $250 off there Rack in Pinion - Steve69 11/9/2009, 9:37 am
View all; 13 responses, latest posted 11/13/2009, 9:54 am
- Re: Unisteer is offering $250 off there Rack in Pinion - Mach1_Ron 11/9/2009, 2:30 pm
  - Re: Unisteer is offering $250 off there Rack in Pinion - Steve69 11/9/2009, 3:15 pm
    - Re: Unisteer is offering $250 off there Rack in Pinion - Mach1_Ron 11/9/2009, 3:25 pm
      - How much are they?????? - MustangSteve 11/9/2009, 5:50 pm
        
        Re: How much are they?????? - Steve69 11/9/2009, 9:02 pm
        
        Evolutions of the Power Unisteer - Tubo 11/9/2009, 9:37 pm
        
        Re: Evolutions of the Power Unisteer - Richard 11/10/2009, 2:15 pm
        
        Re: Evolutions of the Power Unisteer - Steve69 11/10/2009, 2:32 pm
        
        I initally bought the manual rack, Unisteer offered to buy it back toward a power rack - Tubo 11/10/2009, 7:37 pm
- Re: Unisteer is offering $250 off there Rack in Pinion - Fred 11/10/2009, 8:11 pm
  - Re: Unisteer is offering $250 off there Rack in Pinion - Richard 11/10/2009, 8:41 pm
    - Re: Unisteer is offering $250 off there Rack in Pinion - Fred 11/11/2009, 5:15 pm
- Received my Unisteer unit yesterday. Ill give you a - Steve69 11/13/2009, 9:54 am
  View all;
monte carlo bar relocation - Ted 11/10/2009, 3:54 pm
View all; 14 responses, latest posted 11/13/2009, 9:17 am
- Is this what you have, or similar?........... - T.McG/393 11/10/2009, 4:54 pm
  - Re: Is this what you have, or similar?........... - Ted 11/10/2009, 5:26 pm
    - Ted.......this reminds me of something I saw on the net....... - 6sally6 11/10/2009, 9:16 pm
      - Re: Ted.......this reminds me of something I saw on the net....... - Ted 11/10/2009, 9:33 pm
    - It does look trick but............ - T.McG/393 11/10/2009, 9:54 pm
- Re: monte carlo bar relocation - MustangSteve 11/10/2009, 9:53 pm
  - Hey T.McG - Ted 11/10/2009, 9:56 pm
    - Hey Mustang Steve - Ted 11/10/2009, 9:58 pm
      - Re: Hey Mustang Steve - Richard 11/11/2009, 8:37 am
        
        Re: Hey Mustang Steve - Rudi 11/11/2009, 9:08 am
        
        You're right Richard Butt...... - 6sally6 11/11/2009, 9:17 am
        
        Does it RAIN where you live? - MustangSteve 11/11/2009, 5:02 pm
        
        never thought about the rain - Ted 11/11/2009, 6:31 pm
        
        Best location...... - Al Newman 11/13/2009, 9:17 am
  View all;
Bypass pink ignition to coil wire - perkdc 11/11/2009, 12:57 pm
View all; 8 responses, latest posted 11/13/2009, 8:44 am
- Re: Bypass pink ignition to coil wire - hmartin025 11/11/2009, 2:28 pm
  - You don't have to run it all the way to the coil - MustangSteve 11/11/2009, 4:43 pm
    - Re: You don't have to run it all the way to the coil - perkdc 11/11/2009, 6:14 pm
      - Re: You don't have to run it all the way to the coil - hmartin025 11/11/2009, 10:02 pm
        
        Re: You don't have to run it all the way to the coil - Stevo 11/12/2009, 5:51 am
        
        Re: You don't have to run it all the way to the coil - perkdc 11/12/2009, 9:49 am
- Re: Bypass pink ignition to coil wire - Mach1_Ron 11/12/2009, 11:26 am
  - Re: Bypass pink ignition to coil wire - hmartin025 11/13/2009, 8:44 am
  View all;
Man....wouldn't I just love this.....!!!!! - FriscoSteve 11/11/2009, 4:47 pm
View all; 9 responses, latest posted 11/12/2009, 10:40 pm
- Re: Man....wouldn't I just love this.....!!!!! - ultrastang 11/11/2009, 4:56 pm
- Re: Man....wouldn't I just love this.....!!!!! - MTSteve 11/11/2009, 5:03 pm
  - Re: Man....wouldn't I just love this.....!!!!! - ultrastang 11/11/2009, 5:35 pm
    - Re: Man....wouldn't I just love this.....!!!!! - darren 11/11/2009, 5:56 pm
      - Re: Man....wouldn't I just love this.....!!!!! - ultrastang 11/11/2009, 9:03 pm
- I'll bet a Diet Pepsi... - MustangSteve 11/11/2009, 6:10 pm
  - I'll second that and double it! :) n/m - FriscoSteve 11/12/2009, 7:57 am
- I love my cars, but parking them in actual living space.... - Daze 11/12/2009, 8:58 am
  - Daze... - MustangSteve 11/12/2009, 10:40 pm
  View all;
sn95 Cobra 13 inch Brakes on Granada Spindles - Edselman 11/11/2009, 7:07 pm
View all; 7 responses, latest posted 11/12/2009, 10:36 pm
- Cobra to Granada or '68-'73 Mustang Disc Spindles - ultrastang 11/11/2009, 8:32 pm
  - MustangSteve now offers same setup - MustangSteve 11/11/2009, 8:52 pm
  - Some Particulars/Specs - ultrastang 11/11/2009, 9:57 pm
    - Re: Some Particulars/Specs - jeff351w 11/11/2009, 11:21 pm
    - More info - MustangSteve 11/12/2009, 5:17 pm
      - Re: More info - Edselman 11/12/2009, 7:21 pm
        
        I sent you an email with the info - MustangSteve 11/12/2009, 10:36 pm
  View all;
How to free a frozen brake drum ?? - 68mustang 11/11/2009, 10:34 pm
View all; 7 responses, latest posted 11/12/2009, 8:42 pm
- Re: How to free a frozen brake drum ?? - Lil' Hoss 11/11/2009, 11:25 pm
  - Re: How to free a frozen brake drum ?? - 68mustang 11/11/2009, 11:41 pm
- I hate to ask, but is the parking brake on? - CraigMBA 11/11/2009, 11:51 pm
  - Re: I hate to ask, but is the parking brake on? - 68mustang 11/12/2009, 9:31 am
- Re: How to free a frozen brake drum ?? - Jeff in GA 11/12/2009, 8:49 am
  - Re: How to free a frozen brake drum ?? - hmartin025 11/12/2009, 10:20 am
    - Re: How to free a frozen brake drum ?? - Jim Bowie 11/12/2009, 8:42 pm
  View all;
Looking for member Glen's 65 5.0 - Dharl Bagley 11/11/2009, 9:31 pm
View all; 2 responses, latest posted 11/12/2009, 8:15 pm
- Re: Looking for member Glen's 65 5.0 - ultrastang 11/11/2009, 10:00 pm
  - Re: Looking for member Glen's 65 5.0 - Dharl Bagley 11/12/2009, 8:15 pm
  View all;
6sally6, With your t5 did you go with a T5 Bellhousing - Steve69 11/12/2009, 9:31 am
View all; 4 responses, latest posted 11/12/2009, 7:50 pm
- Re: 6sally6, With your t5 did you go with a T5 Bellhousing - Mach1_Ron 11/12/2009, 11:27 am
  - Re: 6sally6, With your t5 did you go with a T5 Bellhousing - Steve69 11/12/2009, 11:50 am
    - Re: 6sally6, With your t5 did you go with a T5 Bellhousing - Mach1_Ron 11/12/2009, 12:51 pm
- Re: 6sally6, With your t5 did you go with a T5 Bellhousing - 6sally6 11/12/2009, 7:50 pm
  View all;
dibs on may - dodgestang 11/9/2009, 11:14 pm
View all; 18 responses, latest posted 11/12/2009, 5:08 pm
- Where are the results? - CraigMBA 11/9/2009, 11:27 pm
  - NEVERMIND. found it. - CraigMBA 11/9/2009, 11:30 pm
- I would like Oct. for #4 pic. - T.McG/393 11/10/2009, 6:23 am
  - I would like Feb. - jerseyjoe 11/10/2009, 6:44 am
    - January for me...#24 - Mach1_Ron 11/10/2009, 7:08 am
- Requests so noted...Other winners let me know what month you want - MustangSteve 11/10/2009, 10:08 pm
  - Re: Requests so noted...Other winners let me know what month you want - JamesW 11/10/2009, 11:04 pm
  - NOVEMBER.....ACTUALLY I TURNED 40 YESTERDAY - BILLY WALTON from GEORGIA 11/11/2009, 6:25 am
  - Re: Requests so noted...Other winners let me know what month you want - BILLY WALTON from GEORGIA 11/11/2009, 9:57 am
    - Well, at least BILLY can read directions - MustangSteve 11/11/2009, 4:47 pm
      - Re: Well, at least BILLY can read directions - Steve69 11/11/2009, 4:56 pm
      - okokok - JamesW 11/11/2009, 5:17 pm
        
        Re: okokok - t 11/11/2009, 5:58 pm
        
        See...that's better! - MustangSteve 11/11/2009, 6:12 pm
        
        Re: See...that's better! - Mark R 11/11/2009, 8:18 pm
        
        Mark R - please follow the instructions I posted on Nov 10 - MustangSteve 11/11/2009, 9:09 pm
  - Re: Requests so noted...Other winners let me know what month you want - Mark R 11/12/2009, 10:19 am
    - OK, I'll do it for you... Here is what is claimed so far. - MustangSteve 11/12/2009, 5:08 pm
  View all;
OT, DC sniper story - phil 11/10/2009, 5:15 pm
View all; 5 responses, latest posted 11/12/2009, 3:44 pm
- Re: OT, DC sniper story - Ted 11/10/2009, 5:39 pm
  - Re: OT, DC sniper story - Mike Walters 11/10/2009, 5:48 pm
  - Re: OT, DC sniper story - phil 11/10/2009, 5:49 pm
    - I remember "back in the good old days"..... - 6sally6 11/10/2009, 9:07 pm
      - He's got a new assignment for Eternity now........ - Loosenut 11/12/2009, 3:44 pm
  View all;
I TURNED 40 YESTERDAY....O MY - BILLY WALTON from GEORGIA 11/11/2009, 6:26 am
View all; 15 responses, latest posted 11/12/2009, 3:37 pm
- Happy Birthday nm - Mike Walters 11/11/2009, 6:59 am
  - HAPPY BIRTHDAY and - Don 11/11/2009, 7:44 am
- Re: I TURNED 40 YESTERDAY....O MY - hmartin025 11/11/2009, 8:56 am
- Welcome to our side of the hill !! n/m - MTSteve 11/11/2009, 9:17 am
  - 40!!......40!!?......... - 6sally6 11/11/2009, 9:28 am
- 40 is the new 20 - CraigMBA 11/11/2009, 10:05 am
  - Happy Birthday Billy! We are not........................ - Mustsed 11/11/2009, 12:26 pm
- Re: I TURNED 40 YESTERDAY....O MY - vegasKen 11/11/2009, 12:42 pm
- Lordy Lordy look who's 40 - Lil' Hoss 11/11/2009, 12:43 pm
  - You better invest in a New Lark....LOL - Steve69 11/11/2009, 3:29 pm
- TURNED 40 YESTERDAY....and still cant make it to the coast??? - Tubo 11/11/2009, 2:59 pm
- Happy Birthday - MustangSteve 11/11/2009, 4:29 pm
- Re: I TURNED 40 YESTERDAY....O MY - Ron68 11/11/2009, 11:46 pm
- Re: I TURNED 40 YESTERDAY....O MY - BillyMac 11/12/2009, 6:47 am
  - Damn, Billy.... - Loosenut 11/12/2009, 3:37 pm
  View all;
Under Dash - Stevo 11/11/2009, 7:06 am
View all; 5 responses, latest posted 11/12/2009, 10:50 am
- Re: Under Dash - Richard 11/11/2009, 8:28 am
  - Usually, if the cowl is leaking... - MustangSteve 11/11/2009, 5:04 pm
  - Re: Under Dash - Stevo 11/12/2009, 5:49 am
    - Re: Under Dash - Richard 11/12/2009, 7:34 am
      - Re: Under Dash - Stevo 11/12/2009, 10:50 am
  View all;
Breaking Speedo Cable On 3rd one. - Kevin Larsen 11/10/2009, 2:30 am
View all; 6 responses, latest posted 11/12/2009, 10:26 am
- Re: Breaking Speedo Cable On 3rd one. - hmartin025 11/10/2009, 7:31 am
  - Re: Breaking Speedo Cable On 3rd one. - Ed Pitts 11/10/2009, 10:18 am
    - Re: Breaking Speedo Cable On 3rd one. - hmartin025 11/10/2009, 3:10 pm
      - It won't turn backwards...it just shears off the driven gear's teeth - MustangSteve 11/10/2009, 3:17 pm
        
        Thanks everyone! - Kevin Larsen 11/12/2009, 12:58 am
        
        Re: Thanks everyone! - hmartin025 11/12/2009, 10:26 am
  View all;
Found a good hyd clutch system I think - Jay 11/12/2009, 10:17 am
0 responses
9" Ford Rear End Narrowing Thread - F15Falcon 11/10/2009, 9:53 pm
View all; 12 responses, latest posted 11/12/2009, 9:02 am
- Thanks, - Mike Walters 11/11/2009, 7:16 am
  - Re: Thanks, - F15Falcon 11/11/2009, 8:08 am
    - Re: Thanks, - 6sally6 11/11/2009, 9:39 am
    - Re: Thanks, - Mike Walters 11/11/2009, 11:35 am
      - Re: Thanks, - F15Falcon 11/11/2009, 1:32 pm
- Outstanding!! - Denny 11/11/2009, 2:40 pm
  - Re: Outstanding!! - F15Falcon 11/11/2009, 3:28 pm
    - Re: Outstanding!! - Lil' Hoss 11/11/2009, 8:00 pm
      - Re: Outstanding!! - Mike Walters 11/12/2009, 6:25 am
        
        Re: Outstanding!! - Lil' Hoss 11/12/2009, 6:59 am
        
        Maybe Daze can provide pic. - Mike Walters 11/12/2009, 8:34 am
        
        Nope I bought one, for $25.00 It made more sense to buy one n/m - Daze 11/12/2009, 9:02 am
  View all;
Putting a �68 Column into a �65 � wiring question - everybody help! - CraigMBA 11/10/2009, 11:40 am
View all; 14 responses, latest posted 11/11/2009, 10:20 pm
- Re: Putting a �68 Column into a �65 � wiring question - everybody help! - 6sally6 11/10/2009, 3:21 pm
  - I don't and it isn't - CraigMBA 11/10/2009, 3:28 pm
    - Re: I don't and it isn't - 6sally6 11/10/2009, 3:37 pm
      - C'mon Sal! I NEED ya! Don't quit on me now! - CraigMBA 11/10/2009, 7:58 pm
        
        Re: C'mon Sal! I NEED ya! Don't quit on me now! - 6sally6 11/10/2009, 8:31 pm
        
        Next guy? Are you crazy? This is my first car! - CraigMBA 11/10/2009, 9:57 pm
- Re: Putting a �68 Column into a �65 � wiring question - everybody help! - MarkinNJ 11/10/2009, 8:07 pm
  - Here is a pic of said wires - CraigMBA 11/10/2009, 9:56 pm
    - Any chance its not a 68 turn signal switch? - MarkinNJ 11/11/2009, 6:08 am
      - Maybe. No tilt, no column shift. - CraigMBA 11/11/2009, 10:09 am
        
        Re: Maybe. No tilt, no column shift. - Mike Walters 11/11/2009, 11:18 am
        
        That's what I'm going to do. - CraigMBA 11/11/2009, 12:05 pm
        
        Doesn't your state inspection require hazards to work? - MarkinNJ 11/11/2009, 4:10 pm
        
        '65 never had hazards and no annual inspection in CA - CraigMBA 11/11/2009, 10:20 pm
  View all;
11, 11,11 - Rudi 11/11/2009, 8:59 am
View all; 3 responses, latest posted 11/11/2009, 10:06 pm
- Re: 11, 11,11 - MTSteve 11/11/2009, 9:16 am
  - Re: 11, 11,11 - Brian 11/11/2009, 5:08 pm
- Re: 11, 11,11 - hmartin025 11/11/2009, 10:06 pm
  View all;
1964 1/2 mustang - peapodinva 11/9/2009, 10:39 am
View all; 11 responses, latest posted 11/11/2009, 9:15 pm
- How can that be possible? - MustangSteve 11/9/2009, 5:59 pm
  - did you say prototype?? - Denny 11/9/2009, 6:35 pm
    - That makes a Corvair look good n/m - Mike Walters 11/9/2009, 7:10 pm
      - No, I mean there MUST have been a prototype of the real car - MustangSteve 11/9/2009, 7:56 pm
      - Re: That makes a Corvair look good n/m - ultrastang 11/9/2009, 8:00 pm
        
        Re: That makes a Corvair look good n/m - Mike Walters 11/10/2009, 5:56 am
        
        Re: That makes a Corvair look good n/m - MustangSteve 11/10/2009, 3:22 pm
        
        Re: That makes a Corvair look good n/m - Mike Walters 11/10/2009, 5:13 pm
        
        Re: That makes a Corvair look good n/m - t 11/11/2009, 6:53 pm
        
        Ford DID NOT KNOW the Corvair was going to FLOP - MustangSteve 11/11/2009, 9:15 pm
  - Did you say Corvair?? - Denny 11/10/2009, 4:58 pm
  View all;
Lower Fender bolt to rocker Tricks? - Heath 11/10/2009, 6:51 pm
View all; 4 responses, latest posted 11/11/2009, 9:10 pm
- Re: Lower Fender bolt to rocker Tricks? - MustangSteve 11/10/2009, 8:16 pm
  - Yep! Weld is what i was thinking TNX! - Heath 11/10/2009, 8:24 pm
    - Re: Yep! Weld is what i was thinking TNX! - Lstar 11/11/2009, 7:42 pm
      - A hex nut with a integral washer (flanged nut) works best if you are going to weld - MustangSteve 11/11/2009, 9:10 pm
  View all;
Compression - Dave 11/11/2009, 12:23 pm
View all; 6 responses, latest posted 11/11/2009, 4:39 pm
- Re: Compression - don 11/11/2009, 12:35 pm
  - Re: Compression - Dave 11/11/2009, 1:08 pm
    - Re: Compression - hmartin025 11/11/2009, 2:24 pm
- Re: Compression - Lil' Hoss 11/11/2009, 12:38 pm
- Re: Compression - Steve69 11/11/2009, 3:27 pm
  - Just for trivia sake... - MustangSteve 11/11/2009, 4:39 pm
  View all;
Modern Driveline and Unisteer Business Experience - ltret98 11/10/2009, 12:25 pm
View all; 10 responses, latest posted 11/11/2009, 3:33 pm
- Re: Modern Driveline and Unisteer Business Experience - Steve69 11/10/2009, 2:34 pm
  - Unless you are talking about cable clutch or crossmembers... - MustangSteve 11/10/2009, 3:12 pm
    - Jeremey' MS Cable Clutch is better than my Modern unit - CraigMBA 11/10/2009, 3:32 pm
    - Re: Unless you are talking about cable clutch or crossmembers... - ltret98 11/10/2009, 5:50 pm
    - I want what is best for Mustang consumer. Now offering the longer cable option... - MustangSteve 11/10/2009, 6:14 pm
- Re: Modern Driveline and Unisteer Business Experience - Kristang 11/10/2009, 7:02 pm
  - I've talked with Brian, so often we recognise each others voice on the phone - Tubo 11/10/2009, 7:30 pm
    - Re: I've talked with Brian, so often we recognise each others voice on the phone - Steve69 11/10/2009, 8:50 pm
      - Steve, these are factory installed bolts, that shouldent have come adrift - Tubo 11/10/2009, 9:18 pm
        
        Re: Steve, these are factory installed bolts, that shouldent have come adrift - Steve69 11/11/2009, 3:33 pm
  View all;
68 Fastback Front Fender Removal tips needed - Brent 11/3/2009, 9:35 am
View all; 5 responses, latest posted 11/11/2009, 2:14 pm
- Re: 68 Fastback Front Fender Removal tips needed - MustangSteve 11/3/2009, 8:56 pm
  - Headlight Bucket Removal 68 - Brent 11/11/2009, 8:59 am
    - Re: Headlight Bucket Removal 68 - 6sally6 11/11/2009, 9:10 am
      - Re: Headlight Bucket Removal 68 - Brent 11/11/2009, 9:18 am
        
        Re: Headlight Bucket Removal 68 - Brent 11/11/2009, 2:14 pm
  View all;
T5 Swap into a 69 FB - Jeff 11/9/2009, 11:07 pm
View all; 9 responses, latest posted 11/11/2009, 1:09 pm
- Re: T5 Swap into a 69 FB - Jeff 11/9/2009, 11:08 pm
  - Re: T5 Swap into a 69 FB - Jeff 11/10/2009, 10:16 pm
    - You can use your old original flywheel..... - 6sally6 11/11/2009, 10:09 am
      - Re: You can use your old original flywheel..... - Jeff 11/11/2009, 11:32 am
        
        Re: You can use your old original flywheel..... - Lil' Hoss 11/11/2009, 11:42 am
        
        Re: You can use your old original flywheel..... - Jeff 11/11/2009, 11:44 am
        
        Let's back up the bus. - Lil' Hoss 11/11/2009, 12:35 pm
        
        Re: Let's back up the bus. - don 11/11/2009, 12:47 pm
        
        Re: Let's back up the bus. - Jeff 11/11/2009, 1:09 pm
  View all;
Forgive all the posts I've made today........... - 6sally6 11/11/2009, 10:05 am
View all; 1 response, posted 11/11/2009, 12:18 pm
- Idle hands + excessive coffee - CraigMBA 11/11/2009, 12:18 pm
  View all;
65 289 v8 running hot - d barrow 11/10/2009, 2:57 pm
View all; 4 responses, latest posted 11/11/2009, 10:01 am
- Re: 65 289 v8 running hot - 6sally6 11/10/2009, 3:08 pm
- Re: 65 289 v8 running hot - Fred 11/10/2009, 8:21 pm
  - Re: 65 289 v8 running hot - t 11/10/2009, 10:00 pm
- Re: 65 289 v8 running hot - 6sally6 11/11/2009, 10:01 am
  View all;
Hey Mustang Steve how do I send pictures - Ted 11/10/2009, 9:40 pm
View all; 1 response, posted 11/11/2009, 9:25 am
- Re: Hey Mustang Steve how do I send pictures - MTSteve 11/11/2009, 9:25 am
  View all;
Fluid Leaking out of ignition coil - Stevo 11/8/2009, 4:43 pm
View all; 10 responses, latest posted 11/11/2009, 5:49 am
- Call NPD, they're great folks!! - Tubo 11/8/2009, 4:53 pm
  - Re: Call NPD, they're great folks!! - Stevo 11/9/2009, 4:48 am
    - toast - Don 11/9/2009, 7:36 am
- PCBs no? - Phil paskvan 11/9/2009, 8:42 am
  - Leaking transformer oil (coil) is probably mineral oil. I don't think... - Bullet Bob 11/9/2009, 10:30 am
    - Re: Leaking transformer oil (coil) is probably mineral oil. I don't think... - ultrastang 11/9/2009, 12:24 pm
      - And probably never was used in car coils - MustangSteve 11/9/2009, 5:58 pm
        
        Re: And probably never was used in car coils - Stevo 11/10/2009, 5:53 am
        
        If you have 12V at the coil you must have by-passed the pink wire... - Bullet Bob 11/10/2009, 7:59 am
        
        Re: If you have 12V at the coil you must have by-passed the pink wire... - Stevo 11/11/2009, 5:49 am
  View all;
Request from a newbie - Mike Walters 11/10/2009, 6:45 am
View all; 4 responses, latest posted 11/11/2009, 5:04 am
- Right click on the picture - MustangSteve 11/10/2009, 3:19 pm
  - Re: Right click on the picture - Mike Walters 11/10/2009, 5:06 pm
    - Re: Right click on the picture - t 11/10/2009, 10:17 pm
      - Thanks t - Mike Walters 11/11/2009, 5:04 am
  View all;
which wheel spacers for cobra brake swap? - cougrnut 11/10/2009, 9:34 pm
View all; 2 responses, latest posted 11/11/2009, 5:01 am
- Re: which wheel spacers for cobra brake swap? - MustangSteve 11/10/2009, 9:52 pm
  - Re: which wheel spacers for cobra brake swap? - cougrnut 11/11/2009, 5:01 am
  View all;
alternator up-grade - larry wagner 11/11/2009, 1:16 am
View all; 1 response, posted 11/11/2009, 2:39 am
- Re: alternator up-grade - jeff351w 11/11/2009, 2:39 am
  View all;
Thoughts on an 8.8 for a 65-66 Mustang - Tubo 11/10/2009, 4:01 pm
View all; 11 responses, latest posted 11/10/2009, 9:58 pm
- I went with b - at 11/10/2009, 4:17 pm
  - at, Would you Plz give us as much real world info as possible?? - Tubo 11/10/2009, 4:29 pm
    - Re: at, Would you Plz give us as much real world info as possible?? - at 11/10/2009, 6:16 pm
      - I was wonderin if you used the earlier Ranger rear or... - Tubo 11/10/2009, 6:58 pm
- Re: Thoughts on an 8.8 for a 65-66 Mustang - Ted 11/10/2009, 4:19 pm
  - Ted, Linc's and Granada's have either 8" or 9" - Tubo 11/10/2009, 4:28 pm
    - Re: Ted, Linc's and Granada's have either 8" or 9" - Ted 11/10/2009, 5:42 pm
      - Ted, I ain't touchin that line.....Hehheh....n/m - Tubo 11/10/2009, 7:31 pm
      - Obviously, Ted's wife doesn't read his posts!! - 6sally6 11/10/2009, 8:40 pm
    - Tubo, no. 3 looks like the most do-able..... - 6sally6 11/10/2009, 8:43 pm
- Re: Thoughts on an 8.8 for a 65-66 Mustang - ultrastang 11/10/2009, 9:58 pm
  View all;
C-4 to C-6 conversion - drew 11/9/2009, 5:07 pm
View all; 6 responses, latest posted 11/10/2009, 8:48 pm
- I'm not a AT guy butt......... - 6sally6 11/9/2009, 9:43 pm
  - Re: I'm not a AT guy butt......... - Al Newman 11/10/2009, 6:38 am
  - One more idea.......... - 6sally6 11/10/2009, 8:48 pm
- Re: C-4 to C-6 conversion - Mach1_Ron 11/10/2009, 7:11 am
- Re: C-4 to C-6 conversion - RICK 11/10/2009, 2:20 pm
- Re: C-4 to C-6 conversion - Fred 11/10/2009, 8:37 pm
  View all;
Basic Holley 600? Good or bad? - Eric 11/8/2009, 10:04 pm
View all; 7 responses, latest posted 11/10/2009, 8:29 pm
- Re: Basic Holley 600? Good or bad? - MustangSteve 11/9/2009, 6:33 pm
  - Re: Basic Holley 600? Good or bad? - Eric 11/9/2009, 7:30 pm
    - Re: Basic Holley 600? Good or bad? - MustangSteve 11/9/2009, 7:54 pm
    - If you do the Holley's answer to the Q-jet........ - 6sally6 11/9/2009, 9:28 pm
      - Have you seen the Carburetors Summit is selling - Steve69 11/10/2009, 2:36 pm
- Re: Basic Holley 600? Good or bad? - Steve69 11/10/2009, 2:48 pm
  - Re: Basic Holley 600? Good or bad? - Fred 11/10/2009, 8:29 pm
  View all;
1962 comet - Danny Cox 11/8/2009, 2:33 pm
View all; 6 responses, latest posted 11/10/2009, 6:48 pm
- Re: 1962 comet - MustangSteve 11/8/2009, 6:00 pm
  - Re: 1962 comet - Danny Cox 11/8/2009, 7:29 pm
    - Re: 1962 comet - MustangSteve 11/9/2009, 6:38 pm
      - Re: 1962 comet - darren 11/9/2009, 7:05 pm
        
        Yeah me too.......It wouyld be a real shame....... - 6sally6 11/9/2009, 9:33 pm
        
        Re: 1962 comet - Danny Cox 11/10/2009, 6:48 pm
  View all;
'67 NOS Fenders Going to a Good Home - ultrastang 11/9/2009, 8:30 pm
View all; 18 responses, latest posted 11/10/2009, 6:17 pm
- You are quite correct - CraigMBA 11/9/2009, 10:07 pm
  - Re: You are quite correct - ultrastang 11/9/2009, 10:12 pm
    - Worth every penny - MustangSteve 11/9/2009, 10:15 pm
      - Re: Worth every penny - ultrastang 11/9/2009, 10:32 pm
        
        Yep - I understand - MustangSteve 11/10/2009, 3:07 pm
- Hey Ultra, do you need this too...... - josh 11/9/2009, 10:24 pm
  - Re: Hey Ultra, do you need this too...... - ultrastang 11/9/2009, 10:36 pm
    - Re: Hey Ultra, do you need this too...... - josh 11/9/2009, 10:45 pm
      - Re: Hey Ultra, do you need this too...... - ultrastang 11/10/2009, 7:41 am
        
        I believe the earlier stuff was painted red oxide - Arjan 11/10/2009, 8:51 am
- Re: '67 NOS Fenders Going to a Good Home - PJ Moran 11/10/2009, 10:08 am
  - Re: '67 NOS Fenders Going to a Good Home - ultrastang 11/10/2009, 12:07 pm
    - Re: '67 NOS Fenders Going to a Good Home - ultrastang 11/10/2009, 12:08 pm
    - Re: '67 NOS Fenders Going to a Good Home - Arjan 11/10/2009, 2:05 pm
      - Re: '67 NOS Fenders Going to a Good Home - ultrastang 11/10/2009, 2:42 pm
        
        Sounds like YOU maybe thinking seriously about.... - 6sally6 11/10/2009, 3:36 pm
        
        Re: Sounds like YOU maybe thinking seriously about.... - ultrastang 11/10/2009, 6:17 pm
        
        I figured you'd agree with me - Arjan 11/10/2009, 4:33 pm
  View all;
Voltage regulator - Dave 11/9/2009, 7:24 pm
View all; 4 responses, latest posted 11/10/2009, 6:05 pm
- Re: Voltage regulator - hmartin025 11/9/2009, 10:14 pm
  - Re: Voltage regulator - Dave 11/10/2009, 2:37 pm
  - Re: Voltage regulator - hmartin025 11/10/2009, 3:04 pm
    - Re: Voltage regulator - Dave 11/10/2009, 6:05 pm
  View all;
My exhaust and headers are at the powder coater - Daze 11/10/2009, 5:15 pm
View all; 2 responses, latest posted 11/10/2009, 5:40 pm
- Re: My exhaust and headers are at the powder coater - Mike Walters 11/10/2009, 5:27 pm
  - I think it is electrostatically sprayed on and then cured in the oven just like powder coat - Daze 11/10/2009, 5:40 pm
  View all;
Mustang Magazine online pic - Dan Brummett 11/10/2009, 5:31 pm
0 responses
steve wanted me to post these pics for RICHARD A MEHL - BILLY WALTON from GEORGIA 11/6/2009, 6:49 am
View all; 9 responses, latest posted 11/10/2009, 3:43 pm
- Damn, that's glassy smooth. Very nice n/m - Mike Walters 11/6/2009, 6:55 am
- Re: steve wanted me to post these pics for RICHARD A MEHL - MTSteve 11/6/2009, 9:47 am
  - Nice going kid - CraigMBA 11/6/2009, 10:01 am
- Re: steve wanted me to post these pics for RICHARD A MEHL - FriscoSteve 11/6/2009, 11:53 am
- Thanks, BILLY! - MustangSteve 11/6/2009, 12:56 pm
  - Richard ,is the headliner done yet ? - jerseyjoe 11/6/2009, 6:40 pm
- Re: steve wanted me to post these pics for RICHARD A MEHL - Phil 11/8/2009, 7:53 am
- Re: steve wanted me to post these pics for RICHARD A MEHL - RICK 11/10/2009, 3:31 pm
- Re: steve wanted me to post these pics for RICHARD A MEHL - Steve69 11/10/2009, 3:43 pm
  View all;
66 power brakes and hyd clutch??? - Terry 11/5/2009, 9:18 pm
View all; 2 responses, latest posted 11/10/2009, 2:32 pm
- Re: 66 power brakes and hyd clutch??? - Jay 11/10/2009, 11:24 am
- Re: 66 power brakes and hyd clutch??? - 66mustang 11/10/2009, 2:32 pm
  View all;
Painting Brake Rotors - Kristang 11/9/2009, 6:36 pm
View all; 6 responses, latest posted 11/10/2009, 2:06 pm
- Re: Painting Brake Rotors - Rudi 11/9/2009, 6:47 pm
  - Re: Painting Brake Rotors - MustangSteve 11/9/2009, 7:57 pm
    - Re: Painting Brake Rotors - Kristang 11/9/2009, 8:44 pm
    - Re: Painting Brake Rotors - whlnut 11/9/2009, 9:45 pm
      - Re: Painting Brake Rotors - MustangSteve 11/9/2009, 10:20 pm
- Re: Painting Brake Rotors - Brent 11/10/2009, 2:06 pm
  View all;
68 mustang big block conversion - Todd 11/9/2009, 1:45 pm
View all; 2 responses, latest posted 11/10/2009, 11:58 am
- Re: 68 mustang big block conversion - Brent 11/9/2009, 2:12 pm
  - Re: 68 mustang big block conversion - Todd 11/10/2009, 11:58 am
  View all;
So, I really went racing last month - LeStone 11/9/2009, 8:59 pm
View all; 4 responses, latest posted 11/10/2009, 11:43 am
- Re: So, I really went racing last month - ultrastang 11/9/2009, 9:29 pm
  - What does 1,000ft translate to in 1/4mi? - LeStone 11/9/2009, 11:01 pm
    - Re: What does 1,000ft translate to in 1/4mi? - ultrastang 11/10/2009, 7:13 am
      - You know that vineyard on the east side of the strip? - CraigMBA 11/10/2009, 11:43 am
  View all;
Falcon block - John 11/10/2009, 9:05 am
0 responses
New Website & FYI Ford on Links page! - Mustang Magazine Brandon 10/6/2009, 10:13 am
View all; 44 responses, latest posted 11/10/2009, 8:11 am
- Brandon, Ya gotta link to the new website?? - Tubo 10/6/2009, 10:39 am
  - Re: Brandon, Ya gotta link to the new website?? - Mustang Magazine Brandon 10/6/2009, 10:40 am
    - I hate to tell you, I couldn't get there from here. - at 10/6/2009, 3:58 pm
    - I got the Google listing butt can't get your site to open. nm - Bullet Bob 10/6/2009, 4:04 pm
      - Prolly one of those, "Ya gotta give it time" things............n/m - Tubo 10/6/2009, 5:12 pm
- Re: New Website & FYI Ford on Links page! - Doug G 10/6/2009, 7:01 pm
  - Re: New Website & FYI Ford on Links page! - Mustang Magazine Brandon 10/9/2009, 1:43 pm
    - I was on there the other day and uploaded a pic of my '66...................... - T.McG/393 10/9/2009, 4:14 pm
      - Re: I was on there the other day and uploaded a pic of my '66...................... - Mustang Magazine Brandon 10/12/2009, 4:12 pm
        
        Hey Brandon............ - whlnut 10/12/2009, 7:41 pm
        
        Re: Hey Brandon............ - Mustang Magazine Brandon 10/13/2009, 10:39 am
- Re: New Website & FYI Ford on Links page! - Lil' Hoss 10/12/2009, 10:51 pm
  - Re: New Website & FYI Ford on Links page! - charlie cram 10/13/2009, 7:40 am
    - Re: New Website & FYI Ford on Links page! - Mustang Magazine Brandon 10/13/2009, 10:37 am
      - Got my 2nd mag today. There are some great pics in there, but........... - T.McG/393 10/13/2009, 5:35 pm
- Brandon, I subscribed a week or so ago Butt (thanks Sal)... - Bullet Bob 10/13/2009, 6:31 pm
  - Re: Brandon, I subscribed a week or so ago Butt (thanks Sal)... - Mustang Magazine Brandon 10/20/2009, 2:29 pm
    - Thanks Brandon, I'll hit the site. nm - Bullet Bob 10/20/2009, 2:59 pm
      - hay Branden - bruce n 10/20/2009, 5:04 pm
        
        Re: hay Branden - Brent 10/21/2009, 8:39 am
        
        Re: hay Branden - Mustang Magazine Brandon 10/23/2009, 10:09 am
        
        Re: hay Branden - Mach1_Ron 10/23/2009, 2:01 pm
        
        Mach1 Ron...I asked the same ? and got this reply......... - T.McG/393 10/24/2009, 8:54 am
        
        Re: Mach1 Ron...I asked the same ? and got this reply......... - Mach1_Ron 10/26/2009, 9:31 am
        
        Re: Mach1 Ron...I asked the same ? and got this reply......... - Mustang Magazine Brandon 10/27/2009, 8:17 am
        
        Re: Mach1 Ron...I asked the same ? and got this reply......... - Mach1_Ron 10/27/2009, 10:10 am
        
        As I said in a previous post....................... - T.McG/393 10/27/2009, 1:14 pm
        
        Re: As I said in a previous post....................... - Mustang Magazine Brandon 10/27/2009, 3:08 pm
        
        Yes Brandon, that's exactly what I would like to see....or maybe ............ - T.McG/393 10/27/2009, 3:54 pm
- Re: Mustang And Fords magazine - Brent 10/28/2009, 12:53 pm
  - Re: Mustang And Fords magazine - Mustang Magazine Brandon 10/29/2009, 9:44 am
    - Re: Mustang And Fords magazine - Brent 10/29/2009, 10:36 am
- Still have not recieved second issue!! Brandon?? - Tubo 10/28/2009, 7:25 pm
  - Re: Still have not recieved second issue!! Brandon?? - Mach1_Ron 10/29/2009, 7:16 am
    - Re: Still have not recieved second issue!! Brandon?? - Mustang Magazine Brandon 10/29/2009, 9:45 am
  - Talked to Jason, Taken care of..........n/m - Tubo 10/29/2009, 9:43 am
- Re: Premier issue for second time?? - Brent 11/6/2009, 4:13 pm
  - Re: Premier issue for second time?? - Lil' Hoss 11/6/2009, 6:15 pm
    - I got two of the premier issues as well - MustangSteve 11/6/2009, 8:27 pm
      - Re: I got two of the premier issues as well - Brent 11/7/2009, 12:21 pm
        
        Re: I got two of the premier issues as well - Lil' Hoss 11/7/2009, 4:06 pm
        
        Re: I got two of the premier issues as well - Brent 11/9/2009, 2:53 pm
        
        Re: I got two of the premier issues as well - Lil' Hoss 11/9/2009, 4:46 pm
        
        Re: I got two of the premier issues as well - Mustang Magazine Brandon 11/10/2009, 8:11 am
  View all;
burnt spark plug - Ted D 11/9/2009, 8:54 pm
View all; 2 responses, latest posted 11/10/2009, 7:11 am
- Re: burnt spark plug - Al Newman 11/10/2009, 6:40 am
- Re: burnt spark plug - ChrisH IA 11/10/2009, 7:11 am
  View all;
Surge tank idea for EFI... - cgomate 11/9/2009, 5:19 pm
View all; 5 responses, latest posted 11/9/2009, 10:15 pm
- I like the one JamesW has on his car - MustangSteve 11/9/2009, 6:21 pm
- Re: Surge tank idea for EFI... - Brian 11/9/2009, 7:34 pm
  - Re: Surge tank idea for EFI... - MustangSteve 11/9/2009, 7:53 pm
    - Re: Surge tank idea for EFI... - JamesW 11/9/2009, 7:58 pm
    - Re: Surge tank idea for EFI... - Brian 11/9/2009, 10:15 pm
  View all;
With all the rage about calendars - Stangster 11/8/2009, 5:22 pm
View all; 15 responses, latest posted 11/9/2009, 10:05 pm
- Re: With all the rage about calendars - JamesW 11/8/2009, 5:55 pm
  - Re: With all the rage about calendars - Stangster 11/8/2009, 8:05 pm
    - I really like pictures.......... - 6sally6 11/8/2009, 9:41 pm
      - Re: I really like pictures.......... - Stangster 11/8/2009, 10:59 pm
      - I said.... - Bullet Bob 11/9/2009, 7:36 am
        
        Re: I said.... - darren 11/9/2009, 10:10 am
        
        LOL...guess the only option is to stay home! - Bullet Bob 11/9/2009, 10:20 am
        
        Or start homebrewing - CraigMBA 11/9/2009, 11:09 am
        
        Re: I said.... - ultrastang 11/9/2009, 7:08 pm
        
        Okay...okay, you too Ultra BUTTTTTTTT, that's It, NO MORE!! - Bullet Bob 11/9/2009, 9:33 pm
        
        We may just hafta git a jug!!!!!! - 6sally6 11/9/2009, 9:34 pm
        
        Re: Okay...okay, you too Ultra BUTTTTTTTT, that's It, NO MORE!! - ultrastang 11/9/2009, 9:45 pm
        
        Wish me luck Boys, I'm off in persuit of the illusive wapiti in the morning... - Bullet Bob 11/9/2009, 10:05 pm
    - Re: With all the rage about calendars - FriscoSteve 11/9/2009, 10:24 am
      - Re: With all the rage about calendars - Stangster 11/9/2009, 6:18 pm
  View all;
Has anyone ever actually seen their Mustang on the road (someone else driving) - MustangSteve 11/4/2009, 6:55 pm
View all; 25 responses, latest posted 11/9/2009, 8:11 pm
- Re: Has anyone ever actually seen their Mustang on the road (someone else driving) - Rudi 11/4/2009, 7:04 pm
  - I will never forget the first time I saw my Mustang drive away - Daze 11/4/2009, 9:33 pm
    - Re: I will never forget the first time I saw my Mustang drive away - MTSteve 11/5/2009, 10:26 am
      - That would be the one :) :) - Daze 11/5/2009, 6:14 pm
        
        Re: That would be the one :) :) - MTSteve 11/8/2009, 4:31 pm
        
        No need to apologize... - Daze 11/8/2009, 6:13 pm
        
        Re: No need to apologize... - MTSteve 11/9/2009, 9:11 am
- Our's is really Jean's and she does actually... - Bullet Bob 11/4/2009, 7:56 pm
  - Re: Our's is really Jean's and she does actually... - 65coop 11/4/2009, 8:15 pm
    - 65coop... - MustangSteve 11/4/2009, 9:14 pm
- My wife drove my black Torino once in the fall - Phillip Paskvan 11/4/2009, 10:10 pm
- Re: Has anyone ever actually seen their Mustang on the road (someone else driving) - Loosenut 11/5/2009, 3:18 am
- Yep, I�ve seen my wife drive our... - Hakan 11/5/2009, 5:49 am
- Re: Has anyone ever actually seen their Mustang on the road (someone else driving) - RICK 11/5/2009, 10:10 am
- Re: Has anyone ever actually seen their Mustang on the road (someone else driving) - tim42 11/5/2009, 11:46 am
  - Re: Has anyone ever actually seen their Mustang on the road (someone else driving) - Brent 11/5/2009, 12:32 pm
    - The mechanic/pal that aligns the front...... - 6sally6 11/5/2009, 5:43 pm
      - Re: Has anyone ever actually seen their Mustang on the road (someone else driving) - Stangster 11/5/2009, 6:49 pm
- Re: Has anyone ever actually seen their Mustang on the road (someone else driving) - mavken 11/6/2009, 10:01 am
  - Interesting observation, mavken - MustangSteve 11/6/2009, 10:35 am
- Re: Has anyone ever actually seen their Mustang on the road (someone else driving) - Jon Lee 11/8/2009, 4:38 pm
  - Jon Lee...haven't heard anything lately about your project.... - Bullet Bob 11/9/2009, 7:46 am
    - Re: Jon Lee...haven't heard anything lately about your project.... - Jon Lee 11/9/2009, 2:57 pm
      - Good for you Jon, just stay with it. When you take it down the road... - Bullet Bob 11/9/2009, 5:33 pm
        
        Re: Good for you Jon, just stay with it. When you take it down the road... - Jon Lee 11/9/2009, 8:11 pm
  View all;
calender pictures - t 11/9/2009, 7:58 pm
0 responses
Distribution/Proportioning Valve Question - Mach1_Ron 11/4/2009, 9:19 am
View all; 16 responses, latest posted 11/9/2009, 6:38 pm
- Re: Distribution/Proportioning Valve Question - MustangSteve 11/4/2009, 6:47 pm
  - Re: Distribution/Proportioning Valve Question - Mach1_Ron 11/5/2009, 7:07 am
    - That's It..1 Answer?? No AL or DAZE.. - Mach1_Ron 11/6/2009, 7:25 am
      - You got the rest of the car together just fine, why not this? - MustangSteve 11/6/2009, 7:46 am
        
        I am a little confused on this... - Mach1_Ron 11/6/2009, 7:54 am
        
        Hopefully yours is the one with the hex head plug on the end - MustangSteve 11/6/2009, 12:11 pm
        
        Re: Hopefully yours is the one with the hex head plug on the end - Mach1_Ron 11/6/2009, 1:20 pm
        
        Yes... - MustangSteve 11/6/2009, 6:04 pm
        
        Amazing thing about this thread.... - MustangSteve 11/6/2009, 8:12 pm
        
        Re: Amazing thing about this thread.... - Mach1_Ron 11/7/2009, 10:00 am
        
        I'm just being cautious... - Bullet Bob 11/7/2009, 11:37 am
        
        Ok, I'll Bite - ultrastang 11/7/2009, 7:01 pm
        
        Like I said... - MustangSteve 11/7/2009, 7:23 pm
        
        Thank You ALL for the input.. - Mach1_Ron 11/8/2009, 11:28 am
- Re: Distribution/Proportioning Valve Question - F15Falcon 11/8/2009, 9:40 pm
  - F-15...there are two types of factory valves - MustangSteve 11/9/2009, 6:38 pm
  View all;
Wiring Help!! - John 50 11/7/2009, 6:43 pm
View all; 6 responses, latest posted 11/9/2009, 6:22 pm
- Re: Wiring Help!! - MustangSteve 11/7/2009, 7:25 pm
  - Re: Wiring Help!! - John 50 11/7/2009, 7:44 pm
    - Start with checking continuity of these - MustangSteve 11/7/2009, 8:00 pm
      - Re: Start with checking continuity of these - John 50 11/9/2009, 7:45 am
        
        LOL...The ONE WIRE I did not mention! - MustangSteve 11/9/2009, 5:52 pm
        
        Re: LOL...The ONE WIRE I did not mention! - John 50 11/9/2009, 6:22 pm
  View all;
1969 mustang Clutch pedal - Steven 10/22/2009, 8:53 pm
View all; 13 responses, latest posted 11/9/2009, 5:54 pm
- Re: 1969 mustang Clutch pedal - 6sally6 10/22/2009, 9:14 pm
  - Most likely... - MustangSteve 10/22/2009, 9:33 pm
    - Re: Most likely... - Steven 10/23/2009, 4:26 pm
  - Re: 1969 mustang Clutch pedal - Steven 10/23/2009, 4:29 pm
    - Re: 1969 mustang Clutch pedal - MustangSteve 10/23/2009, 5:56 pm
      - Re: 1969 mustang Clutch pedal - Steve69 10/23/2009, 8:34 pm
      - Re: 1969 mustang Clutch pedal - Steven 10/24/2009, 8:13 pm
- Re: 1969 mustang Clutch pedal - MustangSteve 10/24/2009, 10:18 pm
  - Re: 1969 mustang Clutch pedal - Steven 11/1/2009, 7:56 pm
    - Re: 1969 mustang Clutch pedal - MustangSteve 11/1/2009, 9:30 pm
      - Hey Steven...... - 6sally6 11/2/2009, 5:35 pm
      - Re: 1969 mustang Clutch pedal - Steven 11/9/2009, 6:04 am
        
        Re: 1969 mustang Clutch pedal - MustangSteve 11/9/2009, 5:54 pm
  View all;
Dorr hinges fox body - BiilyC 11/9/2009, 7:07 am
View all; 1 response, posted 11/9/2009, 5:53 pm
- See my FAQ article on that... - MustangSteve 11/9/2009, 5:53 pm
  View all;
Be Careful:Too good to true Mustangs - vegasKen 11/9/2009, 8:58 am
View all; 3 responses, latest posted 11/9/2009, 3:23 pm
- Re: Be Careful:Too good to true Mustangs - Brent 11/9/2009, 10:15 am
- Re: Be Careful:Too good to true Mustangs - Rudy 11/9/2009, 12:09 pm
  - Me too - josh 11/9/2009, 3:23 pm
  View all;
17 years today - phillip Paskvan 11/7/2009, 3:00 pm
View all; 10 responses, latest posted 11/9/2009, 2:26 pm
- Good for you two... - Bullet Bob 11/7/2009, 3:15 pm
  - Re: Good for you two... - phillip Paskvan 11/7/2009, 3:20 pm
    - Re: Good for you two... - Mike Walters 11/7/2009, 3:27 pm
    - You will both be in my prayers.......nm - Bullet Bob 11/7/2009, 3:28 pm
    - Re: Good for you two... - Jeff in GA 11/9/2009, 2:26 pm
- Congratulations n/m - Mike Walters 11/7/2009, 3:20 pm
- My bride of 38 years and I just got back from a ride.. - DC 11/7/2009, 4:32 pm
  - I just stored her 68 Fairlane vert today :) - phillip Paskvan 11/7/2009, 4:39 pm
  - Congrats to you both and a speedy recovery to your wife - CraigMBA 11/8/2009, 11:14 pm
    - Hang in there.... - Loosenut 11/9/2009, 3:07 am
  View all;
Spring Compressor and Roller Perches on Ebay FYI - Brent 11/5/2009, 1:51 pm
View all; 33 responses, latest posted 11/8/2009, 7:28 pm
- Hmmm, seems like he needs a lesson in... - Hakan 11/5/2009, 3:35 pm
  - Re: Hmmm, seems like he needs a lesson in... - Brent 11/5/2009, 3:40 pm
    - Re: Hmmm, seems like he needs a lesson in... - Hakan 11/5/2009, 3:53 pm
    - OpenTracker is Who Sells Those... - Mach1_Ron 11/5/2009, 3:57 pm
- Re: Spring Compressor and Roller Perches on Ebay FYI - Tom 11/6/2009, 3:33 pm
  - Somebody...send me some popcorn - CraigMBA 11/6/2009, 4:31 pm
    - Since I am the other main builder of perches should I add my 2 cents and really heat things up ???? - Daze 11/8/2009, 6:23 pm
  - Re: Spring Compressor and Roller Perches on Ebay FYI - Jimmy G 11/6/2009, 5:09 pm
  - No popcorn will be needed... please accept my... - Hakan 11/6/2009, 6:36 pm
    - Couldn't you just drill a hole and bend a nail over - jerseyjoe 11/6/2009, 7:12 pm
    - Re: No popcorn will be needed... please accept my... - Tom 11/6/2009, 7:27 pm
      - You should thank Hakan for pointing it out. - Mike Walters 11/7/2009, 6:07 am
        
        if you want the best roller spring perches on the planet ? ... WTF! - Opentracker 11/7/2009, 2:11 pm
        
        That Popcorn May be Needed After All... - ultrastang 11/7/2009, 2:23 pm
        
        I just popped the top on a Bud Lite - Mike Walters 11/7/2009, 3:13 pm
        
        Re: I just popped the top on a Bud Lite - ultrastang 11/7/2009, 3:43 pm
        
        Butter, thanks n/m - Mike Walters 11/7/2009, 3:46 pm
        
        Put the Pop Corn away ... - Opentracker 11/7/2009, 5:09 pm
        
        Re: Put the Pop Corn away ... - John 11/8/2009, 6:29 am
        
        Here are questions I got about roller perches .. and my answer - Opentracker 11/8/2009, 10:42 am
        
        My observations from trying both on the same day - MustangSteve 11/8/2009, 6:09 pm
        
        As always Steve I always respect your opinion which you are intitled too. - Daze 11/8/2009, 6:35 pm
        
        Re: My observations from trying both on the same day - John 11/8/2009, 6:38 pm
        
        Daze... by BOTH ON SAME DAY... - MustangSteve 11/8/2009, 6:58 pm
        
        Thanks for the info, I hope I did not offend :) - Daze 11/8/2009, 7:28 pm
        
        Re: Here are questions I got about roller perches .. and my answer - Tom 11/8/2009, 6:26 pm
        
        Re: if you want the best roller spring perches on the planet ? ... WTF! - kurts65coupe 11/7/2009, 2:28 pm
        
        Re: if you want the best roller spring perches on the planet ? ... WTF! - RollerDude 11/7/2009, 2:36 pm
        
        I don't think Opentrackers comment was inapropriate - Daze 11/8/2009, 6:26 pm
        
        Re: if you want the best roller spring perches on the planet ? ... WTF! - Tom 11/7/2009, 6:05 pm
        
        It sure didn't come across that way - CraigMBA 11/7/2009, 9:40 pm
    - Re: No popcorn will be needed... please accept my... - Tom 11/6/2009, 7:30 pm
      - It looks like Toms roller perches... - MustangSteve 11/6/2009, 8:08 pm
  View all;
When's the last time you drove your mustang? - MTSteve 11/5/2009, 11:11 am
View all; 30 responses, latest posted 11/9/2009, 8:46 am
- Re: When's the last time you drove your mustang? - tim42 11/5/2009, 11:40 am
  - Re: When's the last time you drove your mustang? - Dave 11/5/2009, 11:51 am
    - That black paint looks excellent n/m - Mike Walters 11/5/2009, 5:31 pm
- Re: When's the last time you drove your mustang? - Lil' Hoss 11/5/2009, 11:56 am
- Re: When's the last time you drove your mustang? - Pete M 11/5/2009, 12:18 pm
  - Re: When's the last time you drove your mustang? - Billkubi 11/5/2009, 12:27 pm
    - Last Saturday night... - Bullet Bob 11/5/2009, 1:52 pm
- Re: When's the last time you drove your mustang? - TimC 11/5/2009, 1:55 pm
- Re: When's the last time you drove your mustang? - Brent 11/5/2009, 1:59 pm
- October '08 - Bill 11/5/2009, 2:14 pm
- Today - Tubo 11/5/2009, 4:01 pm
  - Yesterday......... - 6sally6 11/5/2009, 5:26 pm
  - Find any? Or did you find what it was? n/m - Mike Walters 11/5/2009, 5:35 pm
  - 7 weeks ago - josh 11/5/2009, 6:07 pm
    - Re: Last Sunday - Stangster 11/5/2009, 6:55 pm
      - Re: Last Sunday - Jim Bowie 11/5/2009, 8:36 pm
      - Hey Stangster...I got one for ya............ - 6sally6 11/5/2009, 10:05 pm
- Up until about a month ago, It had been three years since I had done - Daze 11/5/2009, 9:23 pm
- Re: When's the last time you drove your mustang? - scott 11/6/2009, 12:30 am
- Re: When's the last time you drove your mustang? - jeff351w 11/6/2009, 3:36 am
- Re: When's the last time you drove your mustang? - Mike Walters 11/6/2009, 6:00 am
  - Re: When's the last time you drove your mustang? - Rolling66 11/6/2009, 7:02 am
    - MY CHILDHOOD FRIEND DROVE MINE UP AND DOWN THE ROAD - BILLY WALTON from GEORGIA 11/6/2009, 7:25 am
- Drove mine to work yesterday - MustangSteve 11/6/2009, 7:41 am
  - Did you say next JULY???? Thought that was changed to Sept. 4. nm - Bullet Bob 11/6/2009, 7:53 am
    - Re: Did you say next JULY???? Thought that was changed to Sept. 4 - Bullet Bob 11/6/2009, 7:55 am
      - Just checking to see if anyone actually read my posts! - MustangSteve 11/6/2009, 10:40 am
  - Re: Drove mine to work yesterday - vegasKen 11/6/2009, 9:17 am
    - How about a Fairlane project Ken... - Bullet Bob 11/6/2009, 5:38 pm
      - Re: How about a Fairlane project Ken... - Rudi 11/9/2009, 8:46 am
  View all;
Learned a little something about body filler the other day......... - 6sally6 11/8/2009, 9:37 pm
View all; 3 responses, latest posted 11/9/2009, 2:39 am
- Same thing goes for fiberglass resin - CraigMBA 11/8/2009, 9:43 pm
- Re: Learned a little something about body filler the other day......... - Lil' Hoss 11/8/2009, 10:24 pm
  - I think she might figure it out - Phil 11/9/2009, 2:39 am
  View all;
what will the pink wire do? - ernest 11/7/2009, 10:16 pm
View all; 4 responses, latest posted 11/8/2009, 10:01 pm
- Re: what will the pink wire do? - MustangSteve 11/7/2009, 10:22 pm
  - Re: what will the pink wire do? - ernest 11/7/2009, 10:42 pm
    - It is not goig to idle perfectly smooth... - MustangSteve 11/8/2009, 9:20 am
      - Re: It is not goig to idle perfectly smooth... - 6sally6 11/8/2009, 10:01 pm
  View all;
Rear end brake line - Rudy 11/8/2009, 6:06 pm
View all; 1 response, posted 11/8/2009, 6:24 pm
- I think I'd make a new one but that's just me. n/m - CraigMBA 11/8/2009, 6:24 pm
  View all;
Coys Wheel fitment and spindle issue - Fred 11/8/2009, 9:18 am
View all; 3 responses, latest posted 11/8/2009, 5:58 pm
- Re: Coys Wheel fitment and spindle issue - MustangSteve 11/8/2009, 11:49 am
  - Re: Coys Wheel fitment and spindle issue - Fred 11/8/2009, 3:47 pm
    - I do not know about fitment of Coys wheels - MustangSteve 11/8/2009, 5:58 pm
  View all;
Electric fans draining battery - Ray 11/1/2009, 10:58 am
View all; 23 responses, latest posted 11/8/2009, 4:55 pm
- That alternator should power two cars...I think you have a grounding problem. - CraigMBA 11/1/2009, 11:39 am
  - Re: That alternator should power two cars...I think you have a grounding problem. - John 11/2/2009, 6:48 am
- Glad the radiator worked for you - MustangSteve 11/1/2009, 11:42 am
  - Ray, where is the main power supply to the fan's - jerseyjoe 11/1/2009, 12:21 pm
    - Re: Ray, where is the main power supply to the fan's - Ray 11/1/2009, 12:59 pm
      - Re: Ray, where is the main power supply to the fan's - Rudi 11/1/2009, 1:11 pm
        
        which rad did you use?? - Ted 11/1/2009, 3:49 pm
        
        Re: which rad did you use?? - Steve69 11/1/2009, 5:09 pm
        
        Re: which rad did you use?? - Kevin,M 11/1/2009, 5:23 pm
        
        Re: which rad did you use?? - Ray 11/1/2009, 11:34 pm
  - Re: Glad the radiator worked for you - Jeff in GA 11/7/2009, 6:07 pm
    - Re: Glad the radiator worked for you - Ray 11/7/2009, 9:31 pm
      - Can you take the alternator to Kragen and get it checked? - CraigMBA 11/7/2009, 9:34 pm
- Re: Electric fans draining battery - Ray 11/7/2009, 6:00 pm
  - Re: Electric fans draining battery - John 11/8/2009, 6:39 am
    - Re: Electric fans draining battery - Ray 11/8/2009, 8:58 am
      - Electric fans draining battery.....go with large case - jerseyjoe 11/8/2009, 12:07 pm
        
        The G3's outperform both of them at idle - CraigMBA 11/8/2009, 12:49 pm
        
        CraigMBA, When you say "smallest" do you refer to the 95amp??......n/m - Tubo 11/8/2009, 12:53 pm
        
        Re: CraigMBA, When you say "smallest" do you refer to the 95amp??......yes - CraigMBA 11/8/2009, 2:15 pm
        
        You can't have overkill in an alternator - jerseyjoe 11/8/2009, 3:33 pm
        
        thats true but even the headlights are causing a problem - CraigMBA 11/8/2009, 4:29 pm
        
        Craig,don't forget, Ford had engineers - jerseyjoe 11/8/2009, 4:55 pm
  View all;
REMEMBER - TODAY is last day to vote for calendars - MustangSteve 11/8/2009, 4:19 pm
0 responses
One step closer - Preston 11/7/2009, 10:34 pm
View all; 2 responses, latest posted 11/8/2009, 2:17 pm
- Preston...you are doing a beautiful job, just beautiful!!...nm - Bullet Bob 11/7/2009, 11:56 pm
  - I agree. I wish I could get motovated to go work on mine today - CraigMBA 11/8/2009, 2:17 pm
  View all;
A FRIEND SENT THIS TO ME SO I THOUGHT I WOULD SHARE - BILLY WALTON from GEORGIA 11/7/2009, 3:25 pm
View all; 6 responses, latest posted 11/8/2009, 12:57 pm
- Thanks Billy...... - Ted 11/7/2009, 5:53 pm
- Thank you Billy for thinking of us and sharing that. Excellent! - Bullet Bob 11/7/2009, 6:10 pm
- Very Cool BILLY,..... you comming to Panama?? - Tubo 11/7/2009, 9:20 pm
  - I CANT MAKE IT....I REALLY WOULD LIKE TOO... - BILLY WALTON from GEORGIA 11/8/2009, 7:58 am
    - Sorry BILLY, we'll miss you - Tubo 11/8/2009, 12:57 pm
- Re: A FRIEND SENT THIS TO ME SO I THOUGHT I WOULD SHARE - TJ 11/8/2009, 9:32 am
  View all;
Car Runs Good, but gasps when stomped on - Billkubi 10/22/2009, 11:34 am
View all; 47 responses, latest posted 11/8/2009, 11:51 am
- Re: Car Runs Good, but gasps when stomped on - Fred 10/22/2009, 12:43 pm
  - Re: Car Runs Good, but gasps when stomped on - Billkubi 10/22/2009, 1:16 pm
  - Re: Car Runs Good, but gasps when stomped on - Clint Lewis 10/27/2009, 6:58 pm
- Re: Car Runs Good, but gasps when stomped on - kurts65coupe 10/22/2009, 12:43 pm
  - Re: Car Runs Good, but gasps when stomped on - Fred 10/22/2009, 1:00 pm
    - Re: Car Runs Good, but gasps when stomped on - Billkubi 10/22/2009, 1:23 pm
- Re: Car Runs Good, but gasps when stomped on - jerryF 10/22/2009, 2:20 pm
  - Re: Car Runs Good, but gasps when stomped on - Fred 10/22/2009, 5:27 pm
    - Re: Car Runs Good, but gasps when stomped on - Billkubi 10/22/2009, 6:24 pm
      - Re: Car Runs Good, but gasps when stomped on - Fred 10/22/2009, 6:37 pm
        
        Re: Car Runs Good, but gasps when stomped on - Billkubi 10/22/2009, 10:18 pm
        
        Re: Car Runs Good, but gasps when stomped on - Fred 10/23/2009, 7:50 pm
- Re: Car Runs Good, but gasps when stomped on - blueovalguy 10/23/2009, 12:12 am
- Re: Car Runs Good, but gasps when stomped on - Alan 10/23/2009, 5:30 am
- Re: Car Runs Good, but gasps when stomped on - hmartin025 10/23/2009, 8:07 am
  - Re: Car Runs Good, but gasps when stomped on - Greg P. 10/26/2009, 3:19 pm
    - Re: Car Runs Good, but gasps when stomped on - Billkubi 10/26/2009, 8:41 pm
      - What size do you want? - MustangSteve 10/26/2009, 9:57 pm
    - Re: Car Runs Good, but gasps when stomped on - Billkubi 10/27/2009, 7:17 am
      - I'll check tonight - MustangSteve 10/27/2009, 7:32 am
        
        Re: I'll check tonight - Billkubi 10/27/2009, 10:05 am
        
        OK, found one - MustangSteve 10/27/2009, 7:17 pm
        
        Re: OK, found one - Billkubi 10/27/2009, 8:04 pm
        
        Re: OK, found one - Billkubi 10/27/2009, 8:23 pm
        
        Parts are in the mail! - MustangSteve 10/27/2009, 8:38 pm
        
        Re: Parts are in the mail! - Greg P. 10/28/2009, 10:19 am
        
        Re: Parts are in the mail! - Billkubi 10/28/2009, 10:26 am
        
        Mine came with .031 squirters - jerryF 10/28/2009, 1:09 pm
        
        Re: Mine came with .031 squirters - Billkubi 10/30/2009, 7:15 pm
        
        Re: Parts are in the mail! - Billkubi 11/2/2009, 1:27 pm
        
        Is the spring activating the squirter adjusted pretty tight?` - MustangSteve 11/2/2009, 4:36 pm
        
        Re: Is the spring activating the squirter adjusted pretty tight?` - Billkubi 11/2/2009, 6:23 pm
        
        SIX degrees!!!!? - MustangSteve 11/3/2009, 8:04 pm
        
        Re: SIX degrees!!!!? - Billkubi 11/4/2009, 6:54 am
        
        Re: SIX degrees!!!!? - Mach1_Ron 11/4/2009, 7:29 am
        
        Re: SIX degrees!!!!? - Billkubi 11/4/2009, 8:04 am
        
        Tighten the spring on the lever that actuates the pump - MustangSteve 11/4/2009, 6:45 pm
        
        Re: Tighten the spring on the lever that actuates the pump - Billkubi 11/5/2009, 10:44 am
        
        Re: Tighten the spring on the lever that actuates the pump - MustangSteve 11/5/2009, 2:10 pm
        
        Re: Tighten the spring on the lever that actuates the pump - Billkubi 11/5/2009, 6:22 pm
        
        Re: Tighten the spring on the lever that actuates the pump - Billkubi 11/6/2009, 6:22 pm
        
        Now put some lighter springs in the distributor... - MustangSteve 11/6/2009, 8:11 pm
        
        Re: Now put some lighter springs in the distributor... - Billkubi 11/7/2009, 9:25 pm
        
        Good - the strocker is OK - MustangSteve 11/8/2009, 11:51 am
  - Re: Car Runs Good, but gasps when stomped on - hmartin025 11/4/2009, 8:26 am
  - Re: Car Runs Good, but gasps when stomped on - Billkubi 11/4/2009, 9:20 am
    - Re: Car Runs Good, but gasps when stomped on - hmartin025 11/4/2009, 6:28 pm
  View all;

Page:

1 2 3 4 5 6 ... Last

Message Archive

Post your Mustang question

Your Name:
Your Email:

Mustang Related Subject:

Message:

Post PIC: (URL from internet hosted picture)

Optional Link Title: (all links require a title)
Mustang Site Link URL: ALSO MUST ENTER TITLE

Notify me by email of all message replies.
Post a Poll
Question to ask:

Enter up to 10 possible answers for your question:

Answer 1:

Answer 2:

Answer 3:

Answer 4:

Answer 5:


Answer 6:

Answer 7:

Answer 8:

Answer 9:

Answer 10:

By posting, you confirm that you have read and agreed to be bound by the board's usage terms.

Users active in the last 15 minutes: , Don, Rudi, fishinjeff, 1 hidden.

REMEMBER!!! When posting a question about your Mustang or other Ford on this FORD MUSTANG FORUM, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.