[ Post your Mustang question | MustangSteve.com - click here ]

FYI FORD

MustangSteve's

Ford Mustang Forum

The Internet's Most Knowledgeable Classic Mustang Information

IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE

MustangSteve has over 30 years of Mustang experience, having owned 19 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify (Especially Modify) their Mustang....THERE ARE NO DUMB QUESTIONS!!!!!

Visit MustangSteve's web site to view some of my work and find details for:

FYIFORD Contributors' PICTURES

Power Brake Retrofit Kits for 65-66 Stangs

Classic Mustang FAQ's by MustangSteve

How to wire in a Duraspark Ignition

Mustang Ride Height Pictures and Descriptions

Steel Bushings to fit Granada Spindles to Mustang Tie Rods

BUY or SELL Mustangs and Parts on MustangSteve's SWAP MEET Page

Vist my EBAY store MustangSteve Performance

How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page

FYIFORD Acronyms for guide to all the acronyms used on this page

FYIFORD Important information and upcoming events

Map shows where all the contributors are located - ADD YOURS

MustangSteve's LAW of Automotive Repair and Restoration:

Any automotive repair or restoration will take twice as long and cost twice as much as originally planned, even after careful prior consideration of MustangSteve's LAW

Time 7/3/2009, 9:30 pm

Page: 1 2 3 4 5 ... Last; Message Archive

BASH VI INFO here (updated 5-21-09) - MustangSteve 8/7/2008, 5:36 pm

Fan Pully distance from crankshaft Pully - Sazzlefrats Today, 6:24 pm
View all; 1 response, posted Today, 8:54 pm
- I can get my whole pinky through mine - CraigMBA Today, 8:54 pm
  View all;
well I pulled the trigger on that Costco lift, Thanks Rudi!!!! - Daze Today, 6:29 pm
View all; 1 response, posted Today, 8:53 pm
- Re: well I pulled the trigger on that Costco lift, Thanks Rudi!!!! - Rudi Today, 8:53 pm
  View all;
What I want is a 331, what I have is a new 308. Use it or sell it?? - Tubo Yesterday, 12:19 pm
View all; 14 responses, latest posted Today, 8:48 pm
- Re: What I want is a 331, what I have is a new 308. Use it or sell it?? - ultrastang Yesterday, 12:46 pm
  - I hate to sound "corn-fused" butt........ - 6sally6 Yesterday, 3:05 pm
    - Re: I hate to sound "corn-fused" butt........ - Rudi Yesterday, 3:56 pm
  - The AFR 165 heads will be the bottleneck in the 331 - CraigMBA Yesterday, 4:21 pm
    - Re: The AFR 165 heads will be the bottleneck in the 331 - jaykmoore@msn.com Yesterday, 4:35 pm
      - Re: The AFR 165 heads will be the bottleneck in the 331 - Kevin,M Yesterday, 4:43 pm
    - Re: The AFR 165 heads will be the bottleneck in the 331 - Arjan Today, 2:36 am
      - Re: The AFR 165 heads will be the bottleneck in the 331 - Kevin,M Today, 5:19 am
      - Two different combos - CraigMBA Today, 8:48 pm
- Why?? - Tubo Yesterday, 6:20 pm
- Do you think the short block will work as a cary on? :) :) - Daze Yesterday, 10:50 pm
  - I would still keep it and...... - 6sally6 Yesterday, 10:59 pm
    - Well 6sally6, Ya may not love my cam too much.. - Tubo Yesterday, 11:41 pm
      - 6sally6, as you're our cam guy,...What would be the difference... - Tubo Today, 5:34 pm
  View all;
My luck ran out on my dads 351W - Daze Today, 12:09 am
View all; 10 responses, latest posted Today, 8:48 pm
- Re: My luck ran out on my dads 351W - Bob E Today, 6:26 am
  - Re: My luck ran out on my dads 351W - Rudi Today, 7:19 am
    - Regarding your Corvair - Mr. Secretary Today, 12:51 pm
      - Re: Regarding your Corvair - Rudi Today, 8:48 pm
- I agree...looks like something rattled around in the chamber... - Bullet Bob Today, 8:18 am
- Re: My luck ran out on my dads 351W - Lil' Hoss Today, 8:18 am
- Did you run a comp check? Miss problem may still be just a beatup valve. - Bullet Bob Today, 8:24 am
- Re: My luck ran out on my dads 351W - phil Today, 8:34 am
  - LOL - Phil that is all too often the case - MustangSteve Today, 4:35 pm
    - The cylinder wall has a score in it about 1/2" wide and 1/16" deep I looked at the... - Daze Today, 6:33 pm
  View all;
Making a clone... - JamesW 6/28/2009, 9:34 pm
View all; 13 responses, latest posted Today, 8:12 pm
- Re: Making a clone... - Tubo 6/28/2009, 9:59 pm
  - Don't they sell stripe kits like original - MustangSteve 6/28/2009, 10:04 pm
    - yeah yeah...I knew this was coming. - JamesW 6/28/2009, 10:29 pm
      - mine is the reverse - Jeffro 6/28/2009, 11:21 pm
      - Re: yeah yeah...I knew this was coming. - Tubo 6/29/2009, 1:10 pm
    - Picture of T-code Shelby (sorry it's so big) - Ron68 6/29/2009, 1:14 am
- Re: Making a clone... - T.McG/393 6/29/2009, 9:02 am
  - Re: Making a clone... - JamesW 6/29/2009, 5:57 pm
- Ok... let's here it... - JamesW Today, 4:48 pm
  - As long as it ain't RED, I like it!! - Tubo Today, 5:21 pm
  - Not that my opinion matters a bit....but - Bullet Bob Today, 5:22 pm
  - I like it better than when it had the fog light thingies in the grille - MustangSteve Today, 6:03 pm
    - Re: I like it better than when it had the fog light thingies in the grille - T.McG/393 Today, 8:12 pm
  View all;
WAKE UP!! IT's Once again Time for Uncle Tubos's Friday Nite EFI Quizz. - Tubo Today, 6:20 pm
View all; 7 responses, latest posted Today, 8:04 pm
- What kind of shape are the injectors in, and what is the fuel pressure at the rail and........ - Daze Today, 6:49 pm
  - Flat cam - CraigMBA Today, 7:52 pm
    - Cam is a roller cam, valves are set correctly...thats not it eithern/m - Tubo Today, 7:55 pm
  - Brand new 24lb inj..................nope thats not it..n/m - Tubo Today, 7:54 pm
- And the answer is... - Don Sellers Today, 7:56 pm
  - NAW, none of the above, fuel pressure is 39lb, of good gas...n/m - UncT Today, 8:04 pm
- A TwEECer, and a Moates Quarterhors on seperate A9P ECU's.. - UncT Today, 8:00 pm
  View all;
WHO ALL IS GOING TO BE AT THE BASH - BILLY WALTON from GEORGIA Yesterday, 12:26 pm
View all; 8 responses, latest posted Today, 8:03 pm
- BILLY WALTON AND 6SALLY 6 WILL BE - BILLY WALTON from GEORGIA Yesterday, 12:26 pm
  - IS ANYONE - Digga Digga Doo Yesterday, 12:32 pm
    - ELSE GOING? - Digga Digga Doo Yesterday, 12:33 pm
      - HELLO...... - BILLY WALTON from GEORGIA Yesterday, 5:29 pm
        
        I just got an email from a Jacksonville local.. - MustangSteve Today, 4:42 pm
        
        Did you tell him to bring all his Ford buddies? - T.McG/393 Today, 8:03 pm
- Re: WHO ALL IS GOING TO BE AT THE BASH.....first casualty. - Tubo Today, 5:39 pm
- I fly in late on Thursday and fly out way to early on Sun :) n/m - Daze Today, 6:22 pm
  View all;
Carburator troubles - Ted D 7/1/2009, 3:07 pm
View all; 15 responses, latest posted Today, 7:48 pm
- Well at least........ - 6sally6 7/1/2009, 4:08 pm
  - Re: Well at least........ - Ted D 7/1/2009, 7:04 pm
    - Re: Well at least........ - jerseyjoe 7/1/2009, 7:45 pm
      - Setting the electric choke... - MustangSteve 7/1/2009, 8:53 pm
        
        Re: Setting the electric choke... - Ted D 7/1/2009, 10:46 pm
        
        I think a 600 cfm carb would just....... - 6sally6 Yesterday, 2:58 pm
        
        You need to clean the carb - MustangSteve Yesterday, 5:50 pm
        
        Re: I think a 600 cfm carb would just....... - Ted D Yesterday, 10:25 pm
        
        Re: I think a 600 cfm carb would just....... - 6sally6 Yesterday, 10:37 pm
        
        Re: I think a 600 cfm carb would just....... - Ted D Yesterday, 11:25 pm
- Re: Carburator troubles - John Bednorz Yesterday, 10:36 am
  - Yes!!! We have liftoff!! - Ted D Today, 1:00 pm
    - Ted D....one more thought...... - 6sally6 Today, 1:07 pm
      - Re: Ted D....one more thought...... - Ted D Today, 7:48 pm
- Re: Carburator troubles - robby13 Yesterday, 6:52 pm
  View all;
91 GT Part II - Paul351C Today, 7:25 pm
0 responses
91 GT ignition coil wiring - Paul351C Today, 7:22 pm
0 responses
PICS: Need help identifying missing pieces - Original '65 A/C underdash unit - Billy Mac 6/29/2009, 9:00 pm
View all; 11 responses, latest posted Today, 6:12 pm
- There is a place on ebay... - MustangSteve 6/29/2009, 9:23 pm
  - ...coil instead of a an evaporator ? - BillyMac 6/30/2009, 2:01 pm
    - Welll - MustangSteve 6/30/2009, 8:46 pm
      - Ahhhh. ok - BillyMac Yesterday, 9:00 am
        
        Re: Ahhhh. ok - Lstar Yesterday, 9:58 am
        
        Thanks LStar! - BillyMac Yesterday, 12:56 pm
        
        Billy, here's a shot that shows the orig. grill... - Bullet Bob Yesterday, 2:15 pm
        
        Well...here's the shot! - Bullet Bob Yesterday, 2:16 pm
        
        Careful with the 'glas... - MustangSteve Yesterday, 5:54 pm
        
        I thought about that MS - BillyMac Yesterday, 11:31 pm
        
        Re: I thought about that MS - MustangSteve Today, 6:12 pm
  View all;
what are the best brake pads - ralph 6/25/2009, 9:05 pm
View all; 10 responses, latest posted Today, 6:09 pm
- Re: what are the best brake pads - Gant 6/25/2009, 10:58 pm
  - MS says use cheap pads... - Bullet Bob 6/25/2009, 11:04 pm
    - Re: MS says use cheap pads... - ralph 6/25/2009, 11:28 pm
      - Yup...that's what MS says and it seems to work. n/m - Bullet Bob 6/26/2009, 7:26 am
        
        Re: Yup...that's what MS says and it seems to work. n/m - ralph Yesterday, 9:01 pm
        
        Hhhhuummmmmmmmm.... - 6sally6 Yesterday, 10:43 pm
        
        Re: Hhhhuummmmmmmmm.... - ralph Today, 9:02 am
        
        Depends on how you drive - CraigMBA Today, 9:58 am
      - The Porterfield pads are way better than the cheap ones - CraigMBA Today, 9:51 am
        
        Don't get me wrong... - MustangSteve Today, 6:09 pm
  View all;
T5 crossmember holes - mceachrw 7/1/2009, 11:05 pm
View all; 3 responses, latest posted Today, 5:48 pm
- Re: T5 crossmember holes - jeremy Yesterday, 12:21 am
  - Re: T5 crossmember holes - mceachrw Yesterday, 8:25 pm
    - Re: T5 crossmember holes - MustangSteve Today, 5:48 pm
  View all;
Email me if coming to the bash - MustangSteve 7/1/2009, 7:35 am
View all; 21 responses, latest posted Today, 4:41 pm
- I don't know how it is now, - darren 7/1/2009, 8:05 am
- Roughly 6.5 Hrs Road time between Memphis & Jacksonville - Tubo 7/1/2009, 8:33 am
  - If we do get split up - Don 7/1/2009, 1:19 pm
    - Both Arch trams are operating again. - Greg B. 7/1/2009, 1:26 pm
      - Travling from Memphis - Tubo 7/1/2009, 2:37 pm
        
        Re: Travling from Memphis - jerryF 7/1/2009, 3:36 pm
        
        Well I'd guess the Hotel would be a good start, - Tubo 7/1/2009, 4:11 pm
        
        Ask for the SENIOR RATE at that motel - MustangSteve 7/1/2009, 5:55 pm
        
        I know the Lady's name is Sherry, I realized my mistake as soon as I hit the post button - Tubo 7/1/2009, 7:00 pm
        
        So...COrky... - MustangSteve 7/1/2009, 8:54 pm
        
        Be careful Corky LOL - glenns66 7/1/2009, 9:01 pm
        
        Well Steve, are you talking about that young girl you were talkin to on the beach?? - Tubo 7/1/2009, 9:58 pm
        
        next thing you know, we'll be shutting this thread down too,for the - darren Yesterday, 7:47 am
        
        ME AND 6SALLY 6 ARE LEAVING GEORGIA ON THE 9TH - BILLY WALTON from GEORGIA Yesterday, 12:22 pm
        
        Re: ME AND 6SALLY 6 ARE LEAVING GEORGIA ON THE 9TH - Kevim R McHugh Yesterday, 5:19 pm
        
        Route from Memphis... - MustangSteve Yesterday, 5:46 pm
        
        Re: Route from Memphis... - ultrastang Yesterday, 9:06 pm
- Everyone keep your fingers crossed, 9,10 & 11 weather is looking good, 90 & 0 precip. - T.McG/393 Yesterday, 7:56 pm
  - 90 is COLD compared to 101 here - MustangSteve Yesterday, 8:12 pm
    - tint rear = - Don Yesterday, 8:51 pm
      - AC Question... - MustangSteve Today, 4:41 pm
  View all;
carb choke setting - robby13 Today, 7:37 am
View all; 2 responses, latest posted Today, 4:38 pm
- Re: carb choke setting - hmartin025 Today, 10:09 am
- Same procedure for either - MustangSteve Today, 4:38 pm
  View all;
Engine Running Poorly - I'm Stumped (Long post, lots of details) - John Harvey Today, 10:51 am
View all; 5 responses, latest posted Today, 4:37 pm
- Re: Engine Running Poorly - I'm Stumped (Long post, lots of details) - Ron68 Today, 12:37 pm
- Re: Engine Running Poorly - I'm Stumped (Long post, lots of details) - sparky Today, 2:47 pm
- Re: Engine Running Poorly - I'm Stumped (Long post, lots of details) - Opentracker Today, 3:49 pm
  - Re: Engine Running Poorly - I'm Stumped (Long post, lots of details) - MustangSteve Today, 4:30 pm
- Re: Engine Running Poorly - I'm Stumped (Long post, lots of details) - John Harvey Today, 4:37 pm
  View all;
ProCar Rally Seats - Seat Belts - Bob E Today, 6:59 am
View all; 5 responses, latest posted Today, 4:36 pm
- Re: ProCar Rally Seats - Seat Belts - phil Today, 9:48 am
  - Phil - - Ron68 Today, 12:27 pm
- Re: ProCar Rally Seats - Seat Belts - T.McG/393 Today, 12:03 pm
  - I installed 4 point seat belts into the '68 that we ........... - Mustsed Today, 12:11 pm
- Re: ProCar Rally Seats - Seat Belts - MustangSteve Today, 4:36 pm
  View all;
289 Distributor Advance Springs - Big Tag 6/29/2009, 2:30 pm
View all; 3 responses, latest posted Today, 4:36 pm
- Re: 289 Distributor Advance Springs - MustangSteve 6/29/2009, 4:20 pm
  - Re: 289 Distributor Advance Springs - Big Tag Today, 12:41 pm
    - Email me your address - MustangSteve Today, 4:36 pm
  View all;
I know there are no dumb questions, but...(hot rod question) - Dave Cooper Today, 2:33 pm
View all; 2 responses, latest posted Today, 4:27 pm
- Re: I know there are no dumb questions, but...(hot rod question) - Kevin,M Today, 4:09 pm
  - Most people are removing the parts you are keeping... - MustangSteve Today, 4:27 pm
  View all;
ClassicAutoAir A/C wiring for a 5.0 harness - beytzim Today, 11:12 am
View all; 2 responses, latest posted Today, 4:15 pm
- The wire from the AC demand switch... - Bullet Bob Today, 12:37 pm
- Re: ClassicAutoAir A/C wiring for a 5.0 harness - Jeff in GA Today, 4:15 pm
  View all;
Need a 2.3L T5 slipyoke - phil Today, 8:36 am
View all; 3 responses, latest posted Today, 2:59 pm
- Re: Need a 2.3L T5 slipyoke - jeremy Today, 10:15 am
- Re: Need a 2.3L T5 slipyoke - Lil' Hoss Today, 10:25 am
- May have found one at teh JY - phil Today, 2:59 pm
  View all;
6 deck lid spoiler - jeff bullock 6/29/2009, 1:04 am
View all; 5 responses, latest posted Today, 2:33 pm
- Do you mean the Cal Special style deck? - Scott W 6/29/2009, 2:59 am
  - Look at Jeffro's setup. - Scott W 6/29/2009, 3:02 am
    - Re: Look at Jeffro's setup. - Jeffro 6/30/2009, 12:50 am
      - Re: Look at Jeffro's setup. - John Harvey 6/30/2009, 3:16 pm
        
        Re: Look at Jeffro's setup. - Greg P. Today, 2:33 pm
  View all;
Hey Murfman......... - 6sally6 Today, 1:08 pm
0 responses
aftermarket kick panels with speaker pod... - Jim Garcia 6/28/2009, 10:49 pm
View all; 10 responses, latest posted Today, 12:11 pm
- Re: aftermarket kick panels with speaker pod... - ralph 6/28/2009, 10:52 pm
  - Re: aftermarket kick panels with speaker pod... - Jim Garcia 6/29/2009, 10:55 am
    - Re: aftermarket kick panels with speaker pod... - Rudi 6/29/2009, 12:59 pm
      - Re: aftermarket kick panels with speaker pod... - ralph 6/29/2009, 1:42 pm
        
        Re: aftermarket kick panels with speaker pod... - Jim Garcia 6/29/2009, 11:35 pm
        
        Re: aftermarket kick panels with speaker pod... - kaz 6/30/2009, 11:46 pm
        
        Kaz, the 68 and earlier cars did not have vents down there like the 69-70 - MustangSteve 7/1/2009, 9:06 pm
        
        Re: Kaz, the 68 and earlier cars did not have vents down there like the 69-70 - ralph 7/1/2009, 9:18 pm
        
        Re: Kaz, the 68 and earlier cars did not have vents down there like the 69-70 - Raul Yesterday, 10:19 pm
        
        Re: aftermarket kick panels with speaker pod... - Al Newman Today, 12:11 pm
  View all;
horn woes! - robby13 Yesterday, 6:44 pm
View all; 3 responses, latest posted Today, 12:07 pm
- Here is an easy way to fix it - MustangSteve Yesterday, 8:14 pm
  - Re: Here is an easy way to fix it - robby13 Today, 7:41 am
  - You might try... - Al Newman Today, 12:07 pm
  View all;
Dannmar 4 post lift - - - - Rudi Yesterday, 9:37 am
View all; 12 responses, latest posted Today, 8:53 am
- Re: Dannmar 4 post lift - - - - Don Yesterday, 10:35 am
- That looks like the same one Doug Ray has. - Tubo Yesterday, 11:55 am
- Re: Dannmar 4 post lift - - - - Rob Yesterday, 4:16 pm
  - Be sure... - MustangSteve Yesterday, 5:48 pm
    - Is that the same as the "jack tray"...says it's included. n/m - Bullet Bob Yesterday, 8:19 pm
      - Re: Is that the same as the "jack tray"...says it's included. n/m - Jim Bowie Yesterday, 8:29 pm
      - no it isn't - dodgestang Yesterday, 9:55 pm
        
        Thanks dodge, I never messed with a lift...but it's looking interesting, n/m - Bullet Bob Today, 8:28 am
    - Got mine from Greg Smith in Indy. - DC Today, 8:53 am
- try here instead - dodgestang Yesterday, 9:19 pm
- Looks like a two-post would suit ME better........... - 6sally6 Yesterday, 11:08 pm
- Dang you, I think I am about to spend $1699.99. Thats the US costco price shipped - Daze Yesterday, 11:33 pm
  View all;
Hood Lock #1 for 67-68 Mustangs.......................... - Mustsed Today, 6:28 am
View all; 1 response, posted Today, 8:35 am
- Re: Hood Lock #1 for 67-68 Mustangs.......................... - Digga Digga Doo Today, 8:35 am
  View all;
EFI help needed, please. - Raul 6/28/2009, 11:57 pm
View all; 4 responses, latest posted Today, 12:13 am
- Had also color differences from the diagrams but....... - Mustsed 6/29/2009, 12:53 am
  - Re: Had also color differences from the diagrams but....... - Stangman16 7/1/2009, 1:54 pm
    - Re: Had also color differences from the diagrams but....... - Stangman16 7/1/2009, 2:07 pm
      - Re: Had also color differences from the diagrams but....... - Raul Today, 12:13 am
  View all;
How to tell which Petronix I need? - 97Snake1668 7/1/2009, 11:37 am
View all; 14 responses, latest posted Yesterday, 11:01 pm
- Re: How to tell which Petronix I need? - Al Newman 7/1/2009, 12:50 pm
  - Al, is that same one used on an FE? - MustangSteve 7/1/2009, 1:42 pm
    - M/S...the Pertronix 1281 is the same for the 390 ...n/m - jerseyjoe 7/1/2009, 2:03 pm
    - Re: Al, is that same one used on an FE? - 97Snake1668 7/1/2009, 3:42 pm
      - Same here!!!!!!!!! - 6sally6 7/1/2009, 3:55 pm
        
        Re: Same here!!!!!!!!! - 97Snake1668 7/1/2009, 4:48 pm
      - I knew there was some reason I did not ship those parts last night - MustangSteve 7/1/2009, 5:51 pm
        
        Re: I knew there was some reason I did not ship those parts last night - 97Snake1668 7/1/2009, 6:24 pm
        
        Parts are boxed and will ship Thursday - MustangSteve 7/1/2009, 8:56 pm
        
        Re: Parts are boxed and will ship Thursday - 97Snake1668 7/1/2009, 9:11 pm
        
        I'll go pull your box from the shipping bin. - MustangSteve 7/1/2009, 10:48 pm
        
        OK - got the postage changed - MustangSteve 7/1/2009, 10:57 pm
        
        Re: OK - got the postage changed - 97Snake1668 Yesterday, 12:24 pm
- thanks for your service - mark w Yesterday, 11:01 pm
  View all;
Pics from Power Big Meet in V�ster�s, Sweden day 1 - H�kan Yesterday, 5:33 pm
View all; 3 responses, latest posted Yesterday, 8:15 pm
- Re: Pics from Power Big Meet in V�ster�s, Sweden day 1 - MustangSteve Yesterday, 6:00 pm
  - The yellow ragtop has details in Its details - jerseyjoe Yesterday, 6:26 pm
    - I like customs, too - MustangSteve Yesterday, 8:15 pm
  View all;
Rear Window Fan/Vent - 97Snake1668 7/1/2009, 6:52 pm
View all; 5 responses, latest posted Yesterday, 3:26 pm
- What picture?? - T.McG/393 7/1/2009, 9:46 pm
- Re: Rear Window Fan/Vent - ns3racing Yesterday, 12:16 am
- Re: Rear Window Fan/Vent - MarkinNJ Yesterday, 5:33 am
- Re: Rear Window Fan/Vent - dave Yesterday, 1:53 pm
  - Re: Rear Window Fan/Vent - 97Snake1668 Yesterday, 3:26 pm
  View all;
Cylinder heads and engine related.......................... - Mustsed Yesterday, 3:19 am
View all; 5 responses, latest posted Yesterday, 3:12 pm
- Re: Cylinder heads and engine related.......................... - Closenough Yesterday, 6:44 am
- I believe those are the same heads... - Bullet Bob Yesterday, 6:49 am
- Re: Cylinder heads and engine related.......................... - 66fastback Yesterday, 9:06 am
- The E6's are the worst heads used on the 5.0 - Tubo Yesterday, 9:46 am
  - Re: The E6's are the worst heads used on the 5.0 - 6sally6 Yesterday, 3:12 pm
  View all;
Stangster......... - Lil' Hoss 6/30/2009, 10:00 am
View all; 6 responses, latest posted Yesterday, 2:48 pm
- Re: Stangster......... - Stangster 6/30/2009, 2:36 pm
  - Re: Stangster......... - Lil' Hoss 6/30/2009, 7:45 pm
  - Re: Stangste, If you come......... - 6sally6 6/30/2009, 9:51 pm
    - Re: Stangste, If you come......... - Stangster 7/1/2009, 9:08 am
      - Re: Stangste, If you come......... - Lil' Hoss 7/1/2009, 1:08 pm
  - Re: Stangster......... - ultrastang Yesterday, 2:48 pm
  View all;
Duraspark requires ballast resistor or NOT - TomB. 5/30/2009, 3:05 pm
View all; 21 responses, latest posted Yesterday, 6:22 am
- The MS wiring diagram is for a 12 volt high performance coil - T.McG/393 5/30/2009, 5:34 pm
  - I just looked at the 8205 on MSD site and............... - T.McG/393 5/30/2009, 5:52 pm
    - Re: I just looked at the 8205 on MSD site and............... - TomB. 5/31/2009, 10:43 am
      - Re: ds 2 resistor test page... - waynep712 5/31/2009, 11:02 am
        
        Re: ds 2 resistor test page... - TomB. 5/31/2009, 1:27 pm
      - Resistor ballast vs. resistor wire................... - T.McG/393 5/31/2009, 2:11 pm
        
        Resistor ballast vs. resistor wire................... - hmartin025 5/31/2009, 2:42 pm
        
        Re: Resistor ballast vs. resistor wire................... - TomB. 5/31/2009, 9:17 pm
        
        Re: Resistor ballast vs. resistor wire................... - T.McG/393 5/31/2009, 10:04 pm
        
        Re: Resistor ballast vs. resistor wire................... - hmartin025 5/31/2009, 11:02 pm
        
        Re: Ballast resistor vs. resistor wire................... - T.McG/393 6/1/2009, 7:07 am
- Re: Duraspark requires ballast resistor or NOT - Steve 6/30/2009, 3:22 pm
  - Re: Duraspark requires ballast resistor or NOT - jeremy 6/30/2009, 4:20 pm
    - Re: Duraspark requires ballast resistor or NOT - Steve 6/30/2009, 4:51 pm
      - Re: Duraspark requires ballast resistor or NOT - jeremy 6/30/2009, 5:08 pm
        
        Re: Duraspark requires ballast resistor or NOT - Steve 6/30/2009, 5:21 pm
- Re: Duraspark requires ballast resistor or NOT - don 7/1/2009, 11:17 am
  - Re: Duraspark requires ballast resistor or NOT - MustangSteve 7/1/2009, 9:02 pm
    - Re: Duraspark requires ballast resistor or NOT - jeremy 7/1/2009, 9:41 pm
      - Re: Duraspark requires ballast resistor or NOT - MustangSteve 7/1/2009, 10:44 pm
        
        Re: Duraspark requires ballast resistor or NOT - Steve Yesterday, 6:22 am
  View all;
I dont know whats happening, dont know where are how - glenns66 7/1/2009, 9:13 pm
View all; 1 response, posted 7/1/2009, 10:45 pm
- Re: I dont know whats happening, dont know where are how - MustangSteve 7/1/2009, 10:45 pm
  View all;
hey Ultrastang didn't you post a picture once of a differential damper??? - Daze 6/1/2009, 7:57 pm
View all; 14 responses, latest posted 7/1/2009, 10:43 pm
- Re: hey Ultrastang didn't you post a picture once of a differential damper??? - ultrastang 6/1/2009, 8:33 pm
- Any body know what I am talking about? n/m - Daze 6/1/2009, 10:02 pm
  - yes - MustangSteve 6/1/2009, 10:03 pm
    - Re: yes - BWill 6/1/2009, 10:39 pm
  - Re: Any body know what I am talking about? n/m - John Ha 6/2/2009, 5:48 pm
    - Re: Any body know what I am talking about? n/m - Daze 6/2/2009, 5:50 pm
      - Re: Any body know what I am talking about? n/m - whlnut 6/2/2009, 7:25 pm
        
        Many cars have a mass rubber mounted to do... - DC 6/2/2009, 8:30 pm
        
        Drive-train vibration - Randy Yawn 7/1/2009, 1:43 pm
        
        sounds like pinion angle is the problem to me n/m - Daze 7/1/2009, 10:43 pm
        
        Right-you-are-DC....... - 6sally6 7/1/2009, 4:20 pm
      - Re: Any body know what I am talking about? n/m - waynep712 6/3/2009, 2:56 am
        
        Re: Any body know what I am talking about? n/m - waynep712 6/3/2009, 3:20 am
        
        Re: Any body know what I am talking about? n/m - waynep712 6/3/2009, 3:55 am
  View all;
Mustangs Northwest's Roundup - Ron68 6/30/2009, 11:55 pm
View all; 3 responses, latest posted 7/1/2009, 9:54 pm
- Re: Mustangs Northwest's Roundup - Ryan 7/1/2009, 12:01 pm
  - Re: Mustangs Northwest's Roundup - MustangSteve 7/1/2009, 9:00 pm
    - Bring it on! - Ron68 7/1/2009, 9:54 pm
  View all;
Ford 5.0Ltr HO Distributor - GT350 7/1/2009, 6:59 pm
View all; 3 responses, latest posted 7/1/2009, 9:34 pm
- Re: Ford 5.0Ltr HO Distributor - MustangSteve 7/1/2009, 8:55 pm
  - Re: Ford 5.0Ltr HO Distributor - Ed Pitts 7/1/2009, 9:23 pm
    - Re: Ford 5.0Ltr HO Distributor - jeremy 7/1/2009, 9:34 pm
  View all;
1968 Mustang - 390GT AC, POWER STEERING V BELT DIAGRAM - Jeff Hankins 6/23/2009, 10:14 am
View all; 3 responses, latest posted 7/1/2009, 7:06 pm
- Re: 1968 Mustang - 390GT AC, POWER STEERING V BELT DIAGRAM - Jeff Hankins 7/1/2009, 2:48 pm
  - Hey, we did what we could! - MustangSteve 7/1/2009, 5:57 pm
    - If you post pictures of all your brackets ..... - jerseyjoe 7/1/2009, 7:06 pm
  View all;
Hey Murfman, you still go'in to the MSBB?...... - 6sally6 6/30/2009, 4:14 pm
View all; 5 responses, latest posted 7/1/2009, 6:26 pm
- 9 DAYS TILL WE LEAVE SALLY...I CANT WAIT..... - BILLY WALTON from GEORGIA 6/30/2009, 4:28 pm
- Whasssa matter BILLY??? Where are all the posts, "Whos's coming to the BASH??" - Tubo 6/30/2009, 5:10 pm
  - YEah///now would be a good time for me to post alist at the top like last year - MustangSteve 6/30/2009, 5:40 pm
- Re: Hey Murfman, you still go'in to the MSBB?...... - 6sally6 6/30/2009, 9:44 pm
- Re: Hey Murfman, you still go'in to the MSBB?...... - murfman66 7/1/2009, 6:26 pm
  View all;
Engine / Transmission Alignment - Ryan 6/30/2009, 1:18 pm
View all; 10 responses, latest posted 7/1/2009, 5:18 pm
- Re: Engine / Transmission Alignment - Phil 6/30/2009, 1:25 pm
  - Re: Stupid question time. . . - Stangster 6/30/2009, 2:30 pm
    - Re: Stupid question time. . . - Ryan 6/30/2009, 3:23 pm
      - In gear is best for me.... - DC 6/30/2009, 4:14 pm
- Re: Engine / Transmission Alignment - John Bednorz 6/30/2009, 4:07 pm
- My method... - MustangSteve 6/30/2009, 5:47 pm
  - Re: My method... - Emmett Bearden 6/30/2009, 10:16 pm
- Re: Engine / Transmission Alignment - hmartin025 6/30/2009, 11:04 pm
- Update Engine / Transmission Alignment - Ryan 7/1/2009, 11:57 am
  - Re: Update Engine / Transmission Alignment - Phhil 7/1/2009, 5:18 pm
  View all;
Replacing Bellhousing Advice Needed 68 fastback - toploader - Brent 7/1/2009, 11:30 am
View all; 5 responses, latest posted 7/1/2009, 2:54 pm
- Re: Replacing Bellhousing Advice Needed 68 fastback - toploader - 66fastback 7/1/2009, 11:52 am
  - Re: Replacing Bellhousing Advice Needed 68 fastback - toploader - Brent 7/1/2009, 1:39 pm
    - Heli-coils - MustangSteve 7/1/2009, 1:47 pm
      - Re: Heli-coils...or - jerseyjoe 7/1/2009, 2:14 pm
- Re: Replacing Bellhousing Advice Needed 68 fastback - toploader - Brent 7/1/2009, 2:54 pm
  View all;
Mustangsteve (Car Paint) - glenns66 7/1/2009, 10:05 am
View all; 1 response, posted 7/1/2009, 1:39 pm
- Buy:YES Good Price:NO - MustangSteve 7/1/2009, 1:39 pm
  View all;
C-4 Trans help - Drew 6/28/2009, 2:16 pm
View all; 3 responses, latest posted 7/1/2009, 11:20 am
- Re: C-4 Trans help - robert paul 6/29/2009, 9:30 pm
  - Re: C-4 Trans help - 66hdstang 6/30/2009, 2:09 am
- Re: C-4 Trans help - don 7/1/2009, 11:20 am
  View all;
Made a trip to Home Depot - Jon Lee 6/29/2009, 11:05 am
View all; 4 responses, latest posted 7/1/2009, 10:18 am
- Check this out - MustangSteve 6/29/2009, 5:09 pm
  - Re: Check this out - Jon Lee 6/29/2009, 11:11 pm
  - Re: Check this out - MustangSteve 6/30/2009, 5:59 pm
- lots of good reference photos at.... - jason 5.0 EFI 7/1/2009, 10:18 am
  View all;
opinions on selling GT fastback please - 66fastback 6/30/2009, 9:05 am
View all; 3 responses, latest posted 7/1/2009, 9:22 am
- In 1991 I sold a totally one-off car that I had built in 1974... - Bullet Bob 6/30/2009, 2:49 pm
- Re: opinions on selling GT fastback please - MustangSteve 6/30/2009, 5:52 pm
- Re: opinions on selling GT fastback please - 66fastback 7/1/2009, 9:22 am
  View all;
wiring harness - David 6/30/2009, 3:37 pm
View all; 3 responses, latest posted 7/1/2009, 9:16 am
- Re: wiring harness - Jim Bowie 6/30/2009, 8:48 pm
- That is my favorite tape and i always use ................. - Mustsed 7/1/2009, 1:42 am
  - Re: That is my favorite tape and i always use ................. - Rudi 7/1/2009, 9:16 am
  View all;
got a little lean to it - 66hdstang 6/28/2009, 6:12 pm
View all; 15 responses, latest posted 7/1/2009, 8:50 am
- does it have sway bars - MustangSteve 6/28/2009, 10:12 pm
  - Re: does it have sway bars - 66hdstang 6/29/2009, 12:39 am
    - If it does, then you have a bent sway bar. - MustangSteve 6/29/2009, 4:30 pm
      - Re: If it does, then you have a bent sway bar. - 66hdstang 6/29/2009, 9:58 pm
        
        Re: If it does, then you have a bent sway bar. - MustangSteve 6/29/2009, 10:14 pm
        
        Re: If it does, then you have a bent sway bar. - 66hdstang 6/30/2009, 1:37 am
        
        Got the same problem with my 67 F/B but, - jerseyjoe 6/30/2009, 7:26 am
        
        Don't drive it,maybe butt.......... - 6sally6 6/30/2009, 10:04 pm
        
        I always set the sway bars last.... - DC 7/1/2009, 8:50 am
- Was the car ever wrecked? - glenns66 6/30/2009, 8:37 am
- Re: got a little lean to it - steve57 6/30/2009, 12:56 pm
  - Re: got a little lean to it - MustangSteve 6/30/2009, 5:55 pm
- Re: got a little lean to it - hmartin025 6/30/2009, 11:06 pm
  - Re: got a little lean to it - 66hdstang 6/30/2009, 11:26 pm
    - Get the front end aligned before doing anything else - MustangSteve 7/1/2009, 7:39 am
  View all;
620's > stock springs? - Stangster 6/28/2009, 7:29 pm
View all; 11 responses, latest posted 7/1/2009, 8:49 am
- Stock springs is going to bring it up a lot higher - glenns66 6/29/2009, 9:34 am
  - Re: Stock springs is going to bring it up a lot higher - Stangster 6/29/2009, 10:00 am
    - Have you visited the ride height page on the top of page - glenns66 6/29/2009, 10:23 am
    - I bought adjustable spacer from SCP... - DC 6/29/2009, 10:24 am
      - Re: Thanks Glen and DC. I'll take a look at both of these options. . n/m - Stangster 6/29/2009, 3:18 pm
        
        Consider Progressive springs - MustangSteve 6/29/2009, 7:59 pm
        
        Re: Consider Progressive springs - Lil' Hoss 6/30/2009, 9:58 am
        
        Re: Where can I read up on Progressive springs? n/m - Stangster 6/30/2009, 3:14 pm
        
        Go to SEARCH box at top of forum. - MustangSteve 6/30/2009, 8:45 pm
- Or just switch to a thicker Coil Spring Insulator Pad - Scott W 7/1/2009, 12:05 am
  - Re: Or just switch to a thicker Coil Spring Insulator Pad - Stangster 7/1/2009, 8:49 am
  View all;
65-66 Fiberglass GT-350 Hood - Bob E 6/29/2009, 10:07 am
View all; 12 responses, latest posted 7/1/2009, 6:58 am
- Re: 65-66 Fiberglass GT-350 Hood - jeremy 6/29/2009, 11:54 am
- Re: 65-66 Fiberglass GT-350 Hood - fastback2race 6/29/2009, 12:22 pm
  - Re: 65-66 Fiberglass GT-350 Hood - Al Newman 6/29/2009, 1:11 pm
    - Al... - MustangSteve 6/29/2009, 4:22 pm
      - Hood........... - jerseyjoe 6/29/2009, 6:38 pm
        
        67 hood . FWIW - Al Newman 6/29/2009, 7:29 pm
        
        Re: 67 hood. HEY AL....... - whlnut 6/30/2009, 7:40 pm
        
        Re: 67 hood. HEY AL....... - Al Newman 7/1/2009, 4:29 am
- Would there be a market for formed aluminum Shelby hoods - MustangSteve 6/30/2009, 6:00 pm
  - Well.... - Al Newman 7/1/2009, 4:32 am
    - Re: Well.... - ultrastang 7/1/2009, 5:33 am
      - I would rather have a good fitting - jerseyjoe 7/1/2009, 6:58 am
  View all;
plasma cutter - Jim Garcia 6/29/2009, 11:41 pm
View all; 8 responses, latest posted 7/1/2009, 12:18 am
- Re: plasma cutter - MustangSteve 6/30/2009, 5:57 pm
  - Re: plasma cutter - ultrastang 6/30/2009, 7:13 pm
    - A friend gave me a Hypertherm 600..... - DC 6/30/2009, 7:57 pm
      - I need one to cut the twin I-Beam stuff off of my truck frame - MustangSteve 6/30/2009, 8:40 pm
        
        Re: I need one to cut the twin I-Beam stuff off of my truck frame - ultrastang 6/30/2009, 9:37 pm
        
        What does one of those run? - MustangSteve 6/30/2009, 10:05 pm
        
        Re: What does one of those run? - ultrastang 7/1/2009, 12:18 am
  - Best money I ever spent!!!!!! - Daze 6/30/2009, 10:07 pm
  View all;
mustang engine and brakes - Richard C Granado 6/29/2009, 6:09 pm
View all; 1 response, posted 6/30/2009, 6:02 pm
- Not sure exactly what you are asking????? - MustangSteve 6/30/2009, 6:02 pm
  View all;
L/H cowl vent - Rudi 6/30/2009, 11:20 am
View all; 1 response, posted 6/30/2009, 5:58 pm
- Re: L/H cowl vent - MustangSteve 6/30/2009, 5:58 pm
  View all;
New part design completed - MustangSteve 6/18/2009, 9:05 pm
View all; 22 responses, latest posted 6/30/2009, 5:57 pm
- Re: New part design completed - Rudi 6/19/2009, 9:00 am
- Re: New part design completed - MustangSteve 6/19/2009, 5:45 pm
  - Re: New part design completed - Terry M 6/20/2009, 5:48 am
    - Re: New part design completed - Kristang 6/20/2009, 4:47 pm
  - Re: New part design completed - P J Moran 6/24/2009, 10:16 am
  - Re: New part design completed - Steve E 6/27/2009, 8:44 am
- Re: New part design completed - Terry 6/21/2009, 10:17 pm
  - Re: New part design completed - MustangSteve 6/22/2009, 7:13 am
- Re: New part design completed - P J Moran 6/24/2009, 10:19 am
  - Re: New part design completed - jeremy 6/24/2009, 10:39 am
    - Re: New part design completed - MustangSteve 6/24/2009, 5:58 pm
      - Re: New part design completed - PJ Moran 6/24/2009, 10:09 pm
        
        Re: New part design completed - MustangSteve 6/25/2009, 4:50 pm
        
        OK, I got the first one installed on one of my Bullitts... - MustangSteve 6/26/2009, 7:04 pm
        
        Re: OK, I got the first one installed on one of my Bullitts... - PJ Moran 6/26/2009, 8:20 pm
        
        Sure - I will get some today. - MustangSteve 6/27/2009, 10:13 am
        
        Re: Sure - I will get some today. - P J Moran 6/29/2009, 5:36 pm
        
        Well, I took the pics - MustangSteve 6/29/2009, 7:42 pm
        
        OK, here is a pic.... - MustangSteve 6/29/2009, 8:35 pm
        
        Re: OK, here is a pic.... - PJ Moran 6/29/2009, 9:44 pm
        
        Do you still have to modify the dust cap? - Ron68 6/30/2009, 12:22 am
        
        Re: Do you still have to modify the dust cap? - MustangSteve 6/30/2009, 5:57 pm
  View all;
FOX front end swap - Paul351C 6/29/2009, 10:36 pm
View all; 4 responses, latest posted 6/30/2009, 5:53 pm
- Re: FOX front end swap - jeremy 6/30/2009, 10:38 am
  - Re: FOX front end swap - Phil 6/30/2009, 2:28 pm
    - Re: FOX front end swap - jeremy 6/30/2009, 2:38 pm
  - Re: FOX front end swap - MustangSteve 6/30/2009, 5:53 pm
  View all;
front blinkers - gordon 6/26/2009, 3:35 pm
View all; 18 responses, latest posted 6/30/2009, 5:41 pm
- Re:I'm not entirely positive. . but - Stangster 6/26/2009, 5:14 pm
  - Re:I'm not entirely positive. . but - gordon 6/26/2009, 6:00 pm
  - Re:I'm not entirely positive. . but - gordon 6/27/2009, 9:17 am
  - Re:I'm not entirely positive. . but - gordon 6/27/2009, 9:40 am
- Re: front blinkers - gordon 6/27/2009, 1:22 pm
  - Re: front blinkers - MustangSteve 6/27/2009, 1:24 pm
    - Re: front blinkers - gordon 6/28/2009, 9:54 am
      - I believe you have the front lights - jerseyjoe 6/28/2009, 12:44 pm
- Re: front blinkers - Bob E 6/28/2009, 6:42 pm
  - Re: front blinkers - Stangster 6/28/2009, 7:21 pm
    - Re: front blinkers - gordon 6/28/2009, 7:55 pm
      - Re: front blinkers - Stangster 6/28/2009, 8:09 pm
        
        Re: front blinkers - gordon 6/29/2009, 5:35 am
      - Re: front blinkers - MarkinNJ 6/29/2009, 8:21 am
        
        Re: front blinkers - gordon 6/29/2009, 7:31 pm
        
        Re: front blinkers - MustangSteve 6/29/2009, 7:37 pm
        
        Re: front blinkers - gordon 6/30/2009, 4:23 pm
        
        I KNEW you could do it! - MustangSteve 6/30/2009, 5:41 pm
  View all;
Cleveland Race Intake manifold - GLADIATOR 6/27/2009, 9:23 pm
View all; 6 responses, latest posted 6/30/2009, 4:14 pm
- Re: Cleveland Race Intake manifold - MustangSteve 6/27/2009, 11:23 pm
  - Re: Cleveland Race Intake manifold - GLADIATOR 6/28/2009, 8:49 am
- Re: Cleveland Race Intake manifold - Opentracker 6/28/2009, 1:27 pm
  - That is for Yates heads - MustangSteve 6/28/2009, 10:18 pm
    - Cleveland Forum Classifieds - Pete September 6/29/2009, 3:51 pm
- There was an over-the-counter Dominator intake... - John Bednorz 6/30/2009, 4:14 pm
  View all;
Re-chrome vs. re-production (65 Fastback) - Rick 6/29/2009, 2:48 pm
View all; 3 responses, latest posted 6/30/2009, 4:11 pm
- Re: Re-chrome vs. re-production (65 Fastback) - Rodney Barrett 6/29/2009, 4:41 pm
  - Ditto......... - jerseyjoe 6/29/2009, 7:00 pm
- Rechroming OEM will give you a better fitting part but... - John Bednorz 6/30/2009, 4:11 pm
  View all;
New Paint - MTSteve 6/24/2009, 9:51 am
View all; 14 responses, latest posted 6/30/2009, 2:31 pm
- Keep digging! - CraigMBA 6/24/2009, 10:26 am
- Looking gooood!!... what color? n/m - Bullet Bob 6/24/2009, 10:35 am
  - Re: Looking gooood!!... what color? n/m - jeremy 6/24/2009, 10:37 am
    - Re: Looking gooood!!... what color? n/m - MTSteve 6/24/2009, 11:09 am
      - Go and - Don 6/24/2009, 11:59 am
        
        LOL...you sound like the story of the old farmer and his new PU. n/m - Bullet Bob 6/24/2009, 12:01 pm
        
        would that be the same farmer with the skinny dipping girls and the cocodile? n/m - tim42 6/27/2009, 11:10 am
        
        I like the Vikings sign.... - Kristang 6/27/2009, 3:55 pm
        
        Re: I like the Vikings sign.... - MTSteve 6/29/2009, 1:54 pm
        
        None of that from me...Nope, I was talking about the farmer... - Bullet Bob 6/30/2009, 2:31 pm
  - Re: Looking gooood!!... what color? n/m - MTSteve 6/24/2009, 11:07 am
- Re: New Paint - Rudy 6/24/2009, 6:41 pm
  - Re: New Paint - MTSteve 6/25/2009, 7:48 am
- Re: New Paint - Dave K 6/30/2009, 2:18 pm
  View all;
Mustang "progress" pics - Phil 6/26/2009, 9:49 am
View all; 7 responses, latest posted 6/29/2009, 9:38 pm
- Re: Mustang "progress" pics - dablack 6/26/2009, 10:03 am
  - Why not use the torino as the daily? - Phil 6/26/2009, 10:26 am
    - Man you dont stop - glenns66 6/26/2009, 3:10 pm
      - I like that 2.3L - MustangSteve 6/27/2009, 11:43 pm
        
        Re: I like that 2.3L - Phil 6/28/2009, 7:51 am
- dual serpentine pulleys - BobN 6/29/2009, 12:42 am
- Re: Mustang "progress" pics - Phil 6/29/2009, 9:38 pm
  View all;
Mustang Milestone - Jim Bowie 6/28/2009, 8:48 pm
View all; 2 responses, latest posted 6/29/2009, 8:44 pm
- Re: Mustang Milestone - Bob E 6/29/2009, 8:04 pm
  - Re: Mustang Milestone - Jim Bowie 6/29/2009, 8:44 pm
  View all;
MB Old School or Torq Thrust II's - Any pics of the MB? - FriscoSteve 6/28/2009, 10:41 am
View all; 9 responses, latest posted 6/29/2009, 7:57 pm
- MB? - MustangSteve 6/28/2009, 12:41 pm
  - Here is the link to the MB Old School's - FriscoSteve 6/28/2009, 1:30 pm
    - Re: Here is the link to the MB Old School's - ultrastang 6/28/2009, 9:02 pm
      - Love the Boyd's.... - FriscoSteve 6/28/2009, 9:16 pm
      - Ultra....nice site... - FriscoSteve 6/28/2009, 9:27 pm
- Re: MB Old School or Torq Thrust II's - Any pics of the MB? - RUDY 6/28/2009, 5:04 pm
  - Re: If I had it to do over again - Stangster 6/28/2009, 7:26 pm
- Changed my mind - I purchased these instead! - FriscoSteve 6/29/2009, 4:29 pm
  - Nice looking! - MustangSteve 6/29/2009, 7:57 pm
  View all;
Overpriced Mustang??? - RUDY 6/28/2009, 5:25 pm
View all; 8 responses, latest posted 6/29/2009, 7:52 pm
- Taiwan fenders - MustangSteve 6/28/2009, 10:17 pm
  - Re: Taiwan fenders - BWill 6/28/2009, 10:48 pm
  - They also have a - Mr. Tim 6/28/2009, 11:11 pm
- Re: Overpriced Mustang??? - Pete M 6/28/2009, 11:46 pm
  - Re: Overpriced Mustang??? - BobN 6/29/2009, 12:26 am
    - Re: Overpriced Mustang??? - Don 6/29/2009, 7:52 am
      - Well... - MustangSteve 6/29/2009, 4:29 pm
        
        Re: Well... - joe 6/29/2009, 7:52 pm
  View all;
Advance Curve needed - Mr. Tim 6/28/2009, 11:00 pm
View all; 4 responses, latest posted 6/29/2009, 7:41 pm
- Re: Advance Curve needed - ultrastang 6/29/2009, 12:21 am
  - EDIS 8 - Mr. Tim 6/29/2009, 9:10 am
  - Re: Advance Curve needed - H�kan 6/29/2009, 9:48 am
    - Re: Advance Curve needed - jerseyjoe 6/29/2009, 7:41 pm
  View all;
pic.of new stable mate with dad on fathers day - mark w 6/29/2009, 4:11 pm
View all; 1 response, posted 6/29/2009, 7:30 pm
- Re: pic.of new stable mate with dad on fathers day - Ron68 6/29/2009, 7:30 pm
  View all;
Need help with missing pieces - original '65 A/C under dash unit - Billy Mac 6/29/2009, 6:08 pm
View all; 1 response, posted 6/29/2009, 6:36 pm
- All ours has is a flimsy plastic grill that snaps in at each end... - Bullet Bob 6/29/2009, 6:36 pm
  View all;
check out this fathers day present.... - BILLY WALTON from GEORGIA 6/29/2009, 5:02 pm
View all; 1 response, posted 6/29/2009, 5:05 pm
- O YEAH....HE HAD THIS PIC FRAMED AND HAD IT WITH A CARD - BILLY WALTON from GEORGIA 6/29/2009, 5:05 pm
  View all;
Early 65 engine mouts--adequate? - Wes 6/27/2009, 5:30 pm
View all; 15 responses, latest posted 6/29/2009, 3:09 pm
- No, but.... - Al Newman 6/27/2009, 8:46 pm
- Re: Early 65 engine mouts--adequate? - glenns66 6/27/2009, 9:01 pm
  - HERE are pix of... - Mr. Tim 6/28/2009, 4:44 pm
    - Re: HERE are pix of... - Wes 6/28/2009, 5:09 pm
      - A LONG time ago, MustangSteve convinced me that - Mr. Tim 6/29/2009, 9:16 am
    - Re: HERE are pix of... - Wes 6/28/2009, 5:14 pm
- Re: Early 65 engine mouts--adequate? - John Harvey 6/27/2009, 10:48 pm
  - Re: Early 65 engine mouts--adequate? - MustangSteve 6/27/2009, 11:50 pm
    - Re: Early 65 engine mouts--adequate? - John Harvey 6/29/2009, 3:09 pm
- Mount pics............... - T.McG/393 6/28/2009, 7:08 am
  - Re: Mount pics............... - Wes 6/28/2009, 2:46 pm
    - Re: Mount pics............... - gjz30075 6/29/2009, 8:32 am
- Re: Early 65 engine mouts--adequate? - dodgestang 6/29/2009, 9:15 am
  - Re: Early 65 engine mouts--adequate? - Rudi 6/29/2009, 1:03 pm
    - Re: Early 65 engine mouts--adequate? - dodgestang 6/29/2009, 2:01 pm
  View all;
Door Hardware Change Out - MTSteve 6/29/2009, 1:57 pm
View all; 1 response, posted 6/29/2009, 2:55 pm
- Re: Door Hardware Change Out - Pete M 6/29/2009, 2:55 pm
  View all;
Daze, when making your spring compressor tool.... - Greg B. 6/29/2009, 1:30 pm
0 responses
AOD Swap (from a C6) - Jeff 6/27/2009, 12:44 am
View all; 3 responses, latest posted 6/29/2009, 12:02 pm
- Re: AOD Swap (from a C6) - MustangSteve 6/27/2009, 10:17 am
  - Re: AOD Swap (from a C6) - Jeff 6/27/2009, 1:31 pm
  - Re: AOD Swap (from a C6) - Mark W 6/29/2009, 12:02 pm
  View all;
speakers - Jim Garcia 6/27/2009, 10:30 am
View all; 14 responses, latest posted 6/29/2009, 8:32 am
- Re: speakers - John Ha 6/27/2009, 10:57 am
  - Re: speakers - MustangSteve 6/27/2009, 1:09 pm
    - Where did you buy them Steve ? - glenns66 6/27/2009, 2:12 pm
      - best buy - I NOW HAVE WORKING RADIO - MustangSteve 6/27/2009, 11:35 pm
        
        It's a crossover, more than likely - CraigMBA 6/27/2009, 11:37 pm
        
        I tried all the settings - it won't go OFF - MustangSteve 6/27/2009, 11:48 pm
        
        Re: best buy - I NOW HAVE WORKING RADIO - Ron68 6/28/2009, 12:16 am
        
        Re: best buy - I NOW HAVE WORKING RADIO - MustangSteve 6/28/2009, 8:25 am
        
        It's either an equalizer or a crossover - CraigMBA 6/29/2009, 8:32 am
- Re: speakers - FriscoSteve 6/28/2009, 10:26 am
  - Re: speakers - MustangSteve 6/28/2009, 12:43 pm
    - Speakers must have done the trick!!! - MustangSteve 6/28/2009, 10:20 pm
      - Congrats!! - FriscoSteve 6/28/2009, 10:48 pm
      - What color was your car today? - glenns66 6/28/2009, 11:33 pm
  View all;
super comp hooker headers - fastback2race 6/27/2009, 11:45 am
View all; 5 responses, latest posted 6/29/2009, 5:10 am
- Re: super comp hooker headers - MustangSteve 6/27/2009, 1:06 pm
  - Re: super comp hooker headers - fastback2race 6/27/2009, 5:16 pm
- Re: super comp hooker headers - GT350 6/27/2009, 6:22 pm
  - Re: super comp hooker headers - fastback2race 6/27/2009, 10:11 pm
- They work with the cable. but ground clearance sucks - Arjan 6/29/2009, 5:10 am
  View all;
65 Mustang Seat Conversion - Jesse 6/27/2009, 3:05 pm
View all; 12 responses, latest posted 6/28/2009, 11:32 pm
- Seats, - Al Newman 6/27/2009, 8:53 pm
  - Re: Seats, - Jesse 6/28/2009, 9:20 pm
- You could use Fox body seats too - CraigMBA 6/27/2009, 9:03 pm
  - Do they sell a Pony set of covers for 70 MACH I seats? - MustangSteve 6/27/2009, 11:27 pm
  - Re: You could use Fox body seats too - Jesse 6/28/2009, 9:22 pm
    - Re: You could use Fox body seats too - ultrastang 6/28/2009, 9:53 pm
      - Re: You could use Fox body seats too - ralph 6/28/2009, 10:46 pm
        
        Re: You could use Fox body seats too - ralph 6/28/2009, 10:50 pm
        
        Re: You could use Fox body seats too - Jesse 6/28/2009, 10:54 pm
      - Re: You could use Fox body seats too - Jesse 6/28/2009, 10:55 pm
        
        Re: You could use Fox body seats too - ultrastang 6/28/2009, 11:31 pm
        
        Re: You could use Fox body seats too - ralph 6/28/2009, 11:32 pm
  View all;
duraspark dist? - 66RUSTY 6/27/2009, 1:20 pm
View all; 9 responses, latest posted 6/28/2009, 10:45 pm
- Re: duraspark dist? - MustangSteve 6/27/2009, 1:26 pm
  - Re: duraspark dist? - 66RUSTY 6/28/2009, 11:50 am
    - Re: duraspark dist? - MustangSteve 6/28/2009, 12:40 pm
      - HHmmmmmm!!!!!!!! - 6sally6 6/28/2009, 1:31 pm
        
        Re: HHmmmmmm!!!!!!!! - 66RUSTY 6/28/2009, 1:42 pm
        
        Re: HHmmmmmm!!!!!!!! - 6sally6 6/28/2009, 2:16 pm
        
        Re: HHmmmmmm!!!!!!!! - jeremy 6/28/2009, 7:25 pm
        
        85 carbed 5.0 was last year the Duraspark was on a Mustang - MustangSteve 6/28/2009, 10:11 pm
        
        Re: 85 carbed 5.0 was last year the Duraspark was on a Mustang - 66rusty 6/28/2009, 10:45 pm
  View all;
351 heads - Mark R 6/28/2009, 2:17 pm
View all; 1 response, posted 6/28/2009, 10:17 pm
- Re: 351 heads - MustangSteve 6/28/2009, 10:17 pm
  View all;
Fox body cable clutch parts. What to buy? - Phil 6/28/2009, 6:33 pm
View all; 2 responses, latest posted 6/28/2009, 10:11 pm
- Re: Fox body cable clutch parts. What to buy? - jeremy 6/28/2009, 7:21 pm
  - I have the adjustable fox cables in stock - MustangSteve 6/28/2009, 10:11 pm
  View all;
GT2008 brake hose question - dkbeam 6/24/2009, 9:13 pm
View all; 2 responses, latest posted 6/28/2009, 9:16 pm
- Re: GT2008 brake hose question - MustangSteve 6/24/2009, 9:26 pm
  - Re: GT2008 brake hose question - JeffW 6/28/2009, 9:16 pm
  View all;
Original Air Conditioner--'68 302 - ChrisH(IA) 6/25/2009, 7:10 pm
View all; 10 responses, latest posted 6/28/2009, 9:12 pm
- Re: Original Air Conditioner--'68 302 - MustangSteve 6/25/2009, 9:09 pm
- Also... - MustangSteve 6/25/2009, 9:10 pm
  - Re: Also... - ChrisH(IA) 6/26/2009, 5:32 am
    - Re: Also... - jerryF 6/26/2009, 9:01 am
      - Re: Also... - ChrisH(IA) 6/26/2009, 9:58 am
        
        that's it - jerryF 6/26/2009, 10:25 am
        
        How tight is your ac belt? - MustangSteve 6/26/2009, 6:57 pm
        
        Re: How tight is your ac belt? - ChrisH(IA) 6/26/2009, 7:53 pm
        
        Re: How tight is your ac belt? - MustangSteve 6/27/2009, 11:40 pm
        
        Re: How tight is your ac belt? - ChrisH(IA) 6/28/2009, 9:12 pm
  View all;
New Parts - DanEFI 6/25/2009, 11:58 pm
View all; 7 responses, latest posted 6/28/2009, 8:57 pm
- Re: New Parts - ultrastang 6/26/2009, 2:48 am
  - Re: New Parts - DanEFI 6/26/2009, 9:40 pm
    - Re: New Parts - ultrastang 6/26/2009, 10:02 pm
      - Hey Ultra, maybe I can help............. - 6sally6 6/27/2009, 10:52 pm
        
        Re: Hey Ultra, maybe I can help............. - DanEFI 6/27/2009, 11:04 pm
        
        Re: Hey Ultra, maybe I can help............. - ultrastang 6/28/2009, 12:14 am
        
        Re: Hey Ultra, maybe I can help............. - DanEFI 6/28/2009, 8:57 pm
  View all;
Procar RALLY Seat track question - FriscoSteve 6/27/2009, 9:35 am
View all; 15 responses, latest posted 6/28/2009, 8:35 pm
- Re: Procar RALLY Seat track question - MustangSteve 6/27/2009, 10:13 am
  - Re: Procar RALLY Seat track question - FriscoSteve 6/27/2009, 11:16 am
    - No, more forward than that - MustangSteve 6/27/2009, 1:08 pm
      - Re: No, more forward than that - JamesW 6/27/2009, 10:37 pm
        
        Yeah, there are multiple ways to do it - MustangSteve 6/27/2009, 11:21 pm
        
        Re: Yeah, there are multiple ways to do it - JamesW 6/28/2009, 5:50 pm
- How tall are you? - T.McG/393 6/27/2009, 11:44 am
  - Re: How tall are you? - FriscoSteve 6/27/2009, 2:36 pm
    - I'm 6 -1 also. When I put my Elites in I started with the original tracks but................ - T.McG/393 6/27/2009, 4:45 pm
      - Re: I'm 6 -1 also. When I put my Elites in I started with the original tracks but................ - FriscoSteve 6/27/2009, 6:39 pm
        
        Take some pics of the tracks and how you mounted them also. - T.McG/393 6/27/2009, 10:23 pm
- Re: Procar RALLY Seat track question - Bob E 6/28/2009, 12:55 pm
  - here's how my 66 fb measures out...... - T.McG/393 6/28/2009, 3:05 pm
    - Re: here's how my 66 fb measures out...... - Bob E 6/28/2009, 6:49 pm
      - Hey Bob, keep in mind that the Elites are not as soft as the original............ - T.McG/393 6/28/2009, 8:35 pm
  View all;
351 MODIFIED (78 ford truck) - Cesar 6/24/2009, 9:06 am
View all; 15 responses, latest posted 6/28/2009, 8:18 pm
- Re: 351 MODIFIED (78 ford truck) - dablack 6/24/2009, 11:04 am
  - Re: 351 MODIFIED (78 ford truck) - Cesar 6/25/2009, 9:21 am
    - A much better idea! - CraigMBA 6/26/2009, 12:54 pm
- Re: 351 MODIFIED (78 ford truck) - Fred 6/24/2009, 11:35 am
- Re: 351 MODIFIED (78 ford truck) - don 6/24/2009, 2:21 pm
  - Re: 351 MODIFIED (78 ford truck) - darren 6/24/2009, 4:20 pm
- Re: 351 MODIFIED (78 ford truck) - hmartin025 6/25/2009, 10:36 am
  - Re: 351 MODIFIED (78 ford truck) - dave 6/26/2009, 11:23 am
- Re: 351 MODIFIED (78 ford truck) - Ron68 6/26/2009, 3:32 pm
  - Re: 351 MODIFIED (78 ford truck) - 6sally6 6/26/2009, 4:49 pm
    - Re: 351 MODIFIED (78 ford truck) - Lil' Hoss 6/27/2009, 12:17 am
      - Re: 351 MODIFIED (78 ford truck) - 6sally6 6/27/2009, 10:18 pm
        
        Re: 351 MODIFIED (78 ford truck) - Lil' Hoss 6/27/2009, 11:20 pm
        
        That's really cool info because.......... - 6sally6 6/28/2009, 2:05 pm
        
        351-400M aren't total junk. - Kyle 6/28/2009, 8:18 pm
  View all;
66 Convertible truss latch screw - Mark From Mpls 6/25/2009, 10:26 pm
View all; 3 responses, latest posted 6/28/2009, 1:49 pm
- Re: 66 Convertible truss latch screw - John Ha 6/26/2009, 6:28 am
  - Re: 66 Convertible truss latch screw - David in GA 6/26/2009, 5:55 pm
    - Re: 66 Convertible truss latch screw - Mark From Mpls 6/28/2009, 1:49 pm
  View all;
66 Mustang pony courtesy door lights - john cook 6/27/2009, 8:29 pm
View all; 3 responses, latest posted 6/28/2009, 11:24 am
- Re: 66 Mustang pony courtesy door lights - Jim Bowie 6/27/2009, 9:14 pm
  - Re: 66 Mustang pony courtesy door lights - MustangSteve 6/27/2009, 11:26 pm
- Re: 66 Mustang pony courtesy door lights - john cook 6/28/2009, 11:24 am
  View all;
Inline six 5 speed swap questions - Dave 6/27/2009, 5:15 pm
View all; 6 responses, latest posted 6/28/2009, 6:07 am
- Answer the following.... - Bill 6/27/2009, 8:13 pm
  - Not exactly, Bill...... - Al Newman 6/27/2009, 8:41 pm
    - Or....If you have a 65 and earlier casting... - Bill 6/27/2009, 11:49 pm
      - Re: Or....If you have a 65 and earlier casting... - Dave 6/28/2009, 5:35 am
        
        Re: Or....If you have a 65 and earlier casting... - Dave 6/28/2009, 5:37 am
      - Re: Or....If you have a 65 and earlier casting... - Al Newman 6/28/2009, 6:07 am
  View all;
i found the cleanest subframe assembly I have ever seen - Greg B. 6/26/2009, 7:12 pm
View all; 8 responses, latest posted 6/27/2009, 11:47 pm
- I'll give him TWO of them for it! - MustangSteve 6/26/2009, 7:25 pm
  - Re: I'll give him TWO of them for it! - Greg B. 6/26/2009, 7:41 pm
    - Re: There's an 8" - Stangster 6/26/2009, 11:30 pm
    - Re: I'll give him TWO of them for it! - lowercasesteve 6/27/2009, 1:01 pm
      - Re: I'll give him TWO of them for it! - Greg B. 6/27/2009, 1:24 pm
        
        Re: I'll give him TWO of them for it! - MustangSteve 6/27/2009, 11:36 pm
        
        Because it's missing the roof and quarterpannels? - CraigMBA 6/27/2009, 11:38 pm
        
        Re: Because it's missing the roof and quarterpannels? - MustangSteve 6/27/2009, 11:47 pm
  View all;
Someone needs to get this lady to the birthday bash - Lstar 6/25/2009, 6:53 pm
View all; 4 responses, latest posted 6/27/2009, 11:45 pm
- Re: Someone needs to get this lady to the birthday bash - lowercasesteve 6/25/2009, 7:17 pm
  - Re: Someone needs to get this lady to the birthday bash - ultrastang 6/25/2009, 8:58 pm
    - Re: Someone needs to get this lady to the birthday bash - Pete M 6/26/2009, 7:56 am
      - Yeah...she might just whip butt at the Spark Plug Contest! - MustangSteve 6/27/2009, 11:45 pm
  View all;
Explorer and Cobra rear calipers the same?? - Ken 6/27/2009, 11:24 pm
View all; 2 responses, latest posted 6/27/2009, 11:44 pm
- NO - CraigMBA 6/27/2009, 11:39 pm
  - Re: NO - Ken 6/27/2009, 11:44 pm
  View all;
New magazine only for Classic Mustangs - Ron68 6/27/2009, 2:04 pm
View all; 3 responses, latest posted 6/27/2009, 10:44 pm
- Re: New magazine only for Classic Mustangs - ultrastang 6/27/2009, 2:12 pm
  - Re: New magazine only for Classic Mustangs - tim42 6/27/2009, 10:11 pm
  - Re: New magazine only for Classic Mustangs - Jim Garcia 6/27/2009, 10:44 pm
  View all;
Question about 289 Head - Anthony 6/27/2009, 6:23 pm
View all; 2 responses, latest posted 6/27/2009, 8:32 pm
- Re: Question about 289 Head - Anthony 6/27/2009, 7:01 pm
  - Re: Question about 289 Head - Al Newman 6/27/2009, 8:32 pm
  View all;
cooling issues (sequel continues) - cajunstang 6/25/2009, 7:14 am
View all; 9 responses, latest posted 6/27/2009, 6:29 pm
- Re: cooling issues (sequel continues) - 6sally6 6/25/2009, 9:47 am
- Can you elongate the holes in the shroud - John Ha 6/25/2009, 2:42 pm
  - Had another thought - John Ha 6/25/2009, 2:48 pm
- Re: cooling issues (sequel continues) - cajunstang 6/25/2009, 2:53 pm
  - The one I bought was metal - John Ha 6/26/2009, 6:22 am
- Maybe they sent you the wrong one - glenns66 6/25/2009, 3:18 pm
- Where in Lousiana? - sparky 6/26/2009, 1:36 pm
  - Re: Where in Lousiana? - cajunstang 6/26/2009, 3:02 pm
    - Re: Where in Lousiana? - sparky 6/27/2009, 6:29 pm
  View all;
how long do coil springs last? - Stangman16 6/27/2009, 1:30 pm
View all; 4 responses, latest posted 6/27/2009, 6:23 pm
- Re: how long do coil springs last? - ultrastang 6/27/2009, 3:34 pm
  - Re: how long do coil springs last? - Stangman16 6/27/2009, 4:49 pm
    - It's based on the quality of ... - jerseyjoe 6/27/2009, 5:24 pm
    - Re: how long do coil springs last? - ultrastang 6/27/2009, 6:23 pm
  View all;
T5 ID - MARK 6/27/2009, 6:27 am
View all; 2 responses, latest posted 6/27/2009, 2:22 pm
- Re: T5 ID - Lil' Hoss 6/27/2009, 11:11 am
- Re: T5 ID - Glen's 1965 5.0 6/27/2009, 2:22 pm
  View all;
next issue - gordon 6/27/2009, 1:20 pm
View all; 3 responses, latest posted 6/27/2009, 2:18 pm
- Re: next issue - MustangSteve 6/27/2009, 1:25 pm
  - Re: next issue - gordon 6/27/2009, 2:06 pm
    - Re: next issue - ultrastang 6/27/2009, 2:18 pm
  View all;
Wrinkle Finish Paint to match Cobra Valve Covers - Bob E 6/27/2009, 11:55 am
View all; 1 response, posted 6/27/2009, 1:05 pm
- Re: Wrinkle Finish Paint to match Cobra Valve Covers - MustangSteve 6/27/2009, 1:05 pm
  View all;
looking for a good manual on how to swap up from a 2.3 to a 5.0 - michael 6/26/2009, 6:59 pm
View all; 2 responses, latest posted 6/27/2009, 1:55 am
- Re: looking for a good manual on how to swap up from a 2.3 to a 5.0 - bruce n 6/26/2009, 7:11 pm
  - Re: looking for a good manual on how to swap up from a 2.3 to a 5.0 - jeremy 6/27/2009, 1:55 am
  View all;
what doors will fit a 1980 coupe - michael 6/26/2009, 6:47 pm
View all; 4 responses, latest posted 6/27/2009, 1:53 am
- Re: what doors will fit a 1980 coupe - MustangSteve 6/26/2009, 6:50 pm
  - Re: what doors will fit a 1980 coupe - bruce n 6/26/2009, 7:14 pm
    - Re: what doors will fit a 1980 coupe - MustangSteve 6/26/2009, 7:23 pm
      - Re: what doors will fit a 1980 coupe - jeremy 6/27/2009, 1:53 am
  View all;
explorer rear disc - mike 6/25/2009, 4:12 pm
View all; 11 responses, latest posted 6/26/2009, 10:56 pm
- Re: explorer rear disc - ultrastang 6/25/2009, 4:30 pm
  - Re: explorer rear disc - steve57 6/25/2009, 8:10 pm
    - Re: explorer rear disc - ultrastang 6/25/2009, 8:21 pm
      - Re: explorer rear disc - steve57 6/26/2009, 12:44 am
- Probably easier to use aftermarket stuff - MustangSteve 6/25/2009, 5:08 pm
  - Leave the Explorer rear ends to guys with Jeeps - CraigMBA 6/26/2009, 12:57 pm
    - Re: Leave the Explorer rear ends to guys with Jeeps - ultrastang 6/26/2009, 1:38 pm
      - I tought that the Explorer.......... - Mustsed 6/26/2009, 2:59 pm
        
        Re: I tought that the Explorer.......... - ultrastang 6/26/2009, 4:49 pm
      - Re: Leave the Explorer rear ends to guys with Jeeps - mike 6/26/2009, 8:13 pm
    - Explorer brakes and Jeep - Jeff in GA 6/26/2009, 10:56 pm
  View all;
65 seat frame - Ted D 6/18/2009, 12:28 pm
View all; 29 responses, latest posted 6/26/2009, 10:31 pm
- Re: 65 seat frame - 6sally6 6/18/2009, 12:36 pm
  - Re: 65 seat frame - Ted D 6/18/2009, 12:59 pm
- Re: 65 seat frame - g.parker 6/18/2009, 2:07 pm
  - Re: 65 seat frame - MustangSteve 6/18/2009, 3:40 pm
- Re: 65 seat frame - g.parker 6/18/2009, 6:19 pm
  - Re: 65 seat frame - Al Newman 6/18/2009, 6:32 pm
  - Re: 65 seat frame - Al Newman 6/18/2009, 6:35 pm
    - Re: 65 seat frame - Ted D 6/18/2009, 11:19 pm
      - Re: 65 seat frame - FriscoSteve 6/19/2009, 7:23 am
        
        Re: 65 seat frame - MustangSteve 6/19/2009, 10:14 am
        
        Re: 65 seat frame - Ted D 6/19/2009, 6:50 pm
        
        Re: 65 seat frame - MustangSteve 6/20/2009, 10:17 pm
        
        Re: 65 seat frame - Ted D 6/21/2009, 10:45 am
        
        I don't know why butt........ - 6sally6 6/21/2009, 12:21 pm
        
        Re: I don't know why butt........ - Ted D 6/21/2009, 3:02 pm
        
        Re: I don't know why butt........ - MustangSteve 6/21/2009, 5:27 pm
        
        Re: I don't know why butt........ - Ted D 6/21/2009, 11:36 pm
        
        Vacuum leaks - MustangSteve 6/22/2009, 7:07 am
        
        Re: Vacuum leaks - Ted D 6/22/2009, 10:41 pm
        
        Re: Vacuum leaks - 6sally6 6/22/2009, 11:09 pm
        
        Re: Vacuum leaks - Ted D 6/23/2009, 9:12 pm
        
        Re: Vacuum leaks - MustangSteve 6/23/2009, 9:13 pm
        
        Re: Vacuum leaks - Ted D 6/24/2009, 10:11 pm
        
        Re: Vacuum leaks - MustangSteve 6/25/2009, 4:47 pm
        
        Re: Vacuum leaks - Ted D 6/25/2009, 8:20 pm
        
        Re: Vacuum leaks - MustangSteve 6/25/2009, 9:08 pm
        
        Re: Vacuum leaks - Ted D 6/25/2009, 9:14 pm
        
        Re: Vacuum leaks - 6sally6 6/26/2009, 9:10 am
        
        Re: Vacuum leaks - Ted D 6/26/2009, 10:31 pm
  View all;

Page: 1 2 3 4 5 ... Last; Message Archive

Post your Mustang question

Your Name:
Your Email:

Mustang Related Subject:

Message:

Post PIC: (URL from internet hosted picture)

Optional Link Title: (all links require a title)
Mustang Site Link URL: ALSO MUST ENTER TITLE

Notify me by email of all message replies.
Post a Poll
Question to ask:

Enter up to 10 possible answers for your question:

Answer 1:

Answer 2:

Answer 3:

Answer 4:

Answer 5:


Answer 6:

Answer 7:

Answer 8:

Answer 9:

Answer 10:

By posting, you confirm that you have read and agreed to be bound by Boardhost's usage terms.

REMEMBER!!! When posting a question about your Mustang or other Ford on this FORD MUSTANG FORUM, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.