[ Post a Response | LiftingLarge.com Forum ]
Welcome to our Forum. Please feel free to ask questions about our products or start conversations about powerlifting. Please keep it clean!! No Advertising!!. We will try to answer your questions on sizing, ordering and using Titan or any other gear.
Posted by Brian Welsh on 9/20/2007, 3:47 pm A couple of questions about Katana sizing please. QUESTION ONE Both of these shirts were very tight around the arm during the initial workouts (crushing the bicep, but then loosened up after several workouts). In this regarded I am absolutely stunned and flabbergasted to read a post on this forum by Stephen on 08/14/07. Stephen says that his unflexed arm is 17/17.5" and his flexed arm is 18/18.5" and his relaxed chest is 48/48.5". He says that he can put on a size 46 Katana "with ease". How is this possible when I measure so much smaller than him (arm 2" smaller and chest 5" smaller) and only now after many workouts is my somewhat stretched out 46 Katana able to be put on with ease? Am I missing something here? Many thanks, Brian
125.238.2.124
Hi guys!
Earlier this year I was wearing a 46 Katana. I have been wearing a 44 Katana A/S for the last few months. My chest measures about 43/43.5" relaxed and upper arm 15" relaxed and 16.25" flexed cold (and a bit bigger pumped of course).
SECOND QUESTION
I can touch with around 400 in my 44 Katana. I can do a full single with 435 and can do around 475 off one wood. Is it time for me to try and sequeeze into a smaller Katana. I wouldn't want the arm hole to be smaller surely (even given Stephen's post) but perhaps I could handle a tighter chest plate? Any thoughts? Is my 44 shirt powerful enough for me at present? Is there any way to work this out?
   |
|
Responses:
|