[ Post a Response | Putting Green Discussion Forum ]
Posted by mike on 6/28/2005, 6:09 pm, in reply to "back lapping sprocket attachment" --Previous Message--
170.138.100.250
you have to remove the sprocket. To do so you may have to use a gear puller.
: I have a 7 blade Mclane reel mower and
: have manual brushed lapping compound
: on each of the blades and spun the
: blades backward by hand to sharpen.
: Does anyone know a way to attached a
: cordless drill with some type of
: rigged up device to fit over the
: sprocket so it will spin backwards.
: I have seen the hand cranks but I do
: not see how they attach to the main
: axle and I don't believe the
: sprocket comes off at least easily.
: Thanks
:
Message Thread:
« Back to thread