
Posted by Rob F. on 6/12/2005, 4:49 pm, in reply to "smoothing" When it gets dry use a shop broom or even a stiff household broom and smooth out the surface with the broom, then wet it down. If it still isn't smooth just keep repeating rolling brooming until you get it perfect you may also have to broom out some foot prints. If you are puting down sod a smooth surface is not as important as you can level the surface with top dressing.
68.3.223.250
Hi Jeff.
--Previous Message--
: What's the trick to getting out all
: the little hills and valleys that
: are created when rolling. I've
: tried using a 2 x 4 to take them
: out. I was just curious if there
: was an easier way.
:
Message Thread:
![]()
« Back to thread