--Previous Message--
: Thanks for the response. I read on a
: forum of a Pinto oil seal that would
: fit. I think I will try that first
: rather than taking the head off. After
: my car idles at the light and I
: accelerate, there is a little bit of
: smoke at the start so hopefully it is
: coming from the intake valves.
:
: --Previous Message--
: On my GT6 and Spitfire I don't believe
: Triumph installed any valve stem seals.
: There may be some that fit but you
: will also need to make sure that when
: the valve is open at max lift the seal
: is not hit by the valve keeper.
:
: Valve guide seals are not typically
: necessary on the exhaust valves.
:
: Doug L.
:
:
: --Previous Message--
: Thanks Doug. Next question, is there an
: oil seal that would fit and stay in
: place? I read on another forum where it
: was done with success.
:
:
:
:
:
Responses