Glen
--Previous Message--
: Been a while since I asked anything here,
: so I'll let you have the first crack at
: it since it will be a day or so before
: I can act on the advice:
: I got my engine started for the first
: time in years. (YAY!) The problem is,
: last time I messed with it I must have
: cross threaded the outlet of the fuel
: pump. (stock glass domed mechanical
: one), so after dealing with a leaking
: pump for the first test firing I
: replaced the now bad part with a spare.
: Hindsight tells me I could have done
: this without removing it,
: but....Anyway, now the priming lever
: works but the engine seems to run till
: the carb bowls run out of fuel, so it
: sounds to me like I didn't get the pump
: seated correctly. Any ideas on properly
: seating the lever?
:
: Just for kicks, here is it running.
:
: https://www.youtube.com/watch?v=f-IEeZ4rzns
:
:
Responses