You're absolutely right. I have a 72 and recently replaced my heater control valve with a used one off an earlier model and now my lever is reversed. No big deal. Just remember that what was then cold is now hot. LOL
--Previous Message--
: The GT6 used two different heater control
: valves. They rotated in reverse of
: each other. Someone correct me if I'm
: wrong, but the GT6+ used the same valve
: as the GT6 MK1, but the MK3 reversed
: the valve and reversed the motion of
: the heater control lever. Putting the
: wrong valve in your car might not be
: too bad if you have a + or 3, but I'd
: have to drive around with my temp lever
: sticking out of the dash when the
: heater was "OFF".
:
: Good luck! - Jim M
:
: --Previous Message--
: On my 70 GT6 the temp. control seems to
: be reversed. When the lever is moved
: to right (hot), it pulls the cable,
: which pulls the lever on the valve
: which in turn lowers the valve,
: shutting of the flow. Every thing
: appears stock. It is no big deal, but
: there must be an explanation.
:
:
:
Responses