Yes the top hole is tapped through the case, hence copper sealing washer.
Glen
--Previous Message--
: Finally a topic that does not involve cam
: timing.
:
: The Bentley manual says that when
: fitting the rear oil seal carrier to
: the back of the block that a copper
: washer is used on the top bolt. I
: don't remember seeing this on the 1500
: or either GT6 engine I took apart in
: the past.
:
: I have plenty of crush washers to use
: so I will fit a copper washer but I'd
: like to understand the intent. I
: assume that the top hole must be tapped
: through to the inside and is a
: potential oil leak path that is sealed
: by the copper washer. Is that correct?
:
: Doug
:
:
:
:
Responses