One thing that I do find with old coils is sometimes the solder connection or rivet on the low tension terminal will break-down or work loose.
Glad you found it, that will drive you nuts...!
Glen
--Previous Message--
: I swapped out coils tonight and the
: problen went away. Coil tested ok, but
: I guess they can still go bad. Thanks
: for the posts!
:
: --Previous Message--
: The only time I experienced something
: like that was when ice crystals were
: clogging my fuel pump strainer. So if
: all else seems good, I'd check fuel
: supply; starting with a new fuel filter
: and then opening up the fuel pump to
: check for diaphragm condition and
: debris.
:
: Good Luck. Let us know how it works
: out.
:
: Ciao - Jim M
:
: --Previous Message--
: My GT6 won't rev past 4000 rpm, even in
: neutral. Mechanical points and
: original carbs. Timing set to 14
: degrees BTDC. Advance is working when
: I rev it. any thoughts?
:
:
:
:
:
Responses