Glen
--Previous Message--
: The pan head screw and nut have worked
: for me for years but I had a thought
: after your post.
:
: I keep expecting the check strap to
: collapse the threads of the bolts I use
: making the assembly loose. You
: mentioned using a pin.
:
: Next time I have to change a check
: strap I may take a 1/4" clevis
: pin, cut it off shorter, and drill a
: new hole for a cotter pin. (Not in
: that order). The short pin and cotter
: should work equally well and pass
: through the checkstrap seal with more
: clearance. The solid body of the pin
: would end my worries about the short
: bolt's threads getting
: "mushed".
:
: Doug L.
:
:
: --Previous Message--
: Thanks, Doug. I think I will try and
: drill the rivet out from the bottom. I
: will use your bolt suggestion, and
: maybe use an elastometric nut
: underneath.
:
:
:
Responses