I will look closely at the damage when my son and the car return home for the Christmas holidays. My plan is to pull the front frame extensions out/forward if necessary but I am also not above cutting them and re-welding them to get them back into position quickly if pulling does not work. Hopefully the impact was not severe enough to cause the "inboard" damage you mentioned between the firewall and suspension. I will definitely look for it.
I do not have the factory manuals but I do have a Bently manual. I will look to see if the dimensions I need are in there. If not, I have a friend locally who should have the books.
Thanks for the heads up on how to post my parts wanted list and for where to look for the dimensions.
Doug L.
--Previous Message--
: Sorry to hear it, the damage sounds
: typical.
: The factory shop manual has detailed
: frame specs but no doubt they are
: online somewhere.
: If the damage got into the chassis, it
: most likely folded up behind the lower
: a-arm mounts, in that little short
: section in front of the bulkhead, look
: for a kink there.
: Post a WTB here for what you need.
: Good luck, let us know what you find.
: Glen
:
Responses