http://ahsprite-mk3-restoration.blogspot.com.es/2012/07/gear-knob-restoration.html
--Previous Message--
: I have used the same method on plastic
: parts before. The engraving in this
: knob is a bit shallow and almost
: smeared looking so I decided not to use
: any abrasives (yet) on this one. So
: far I have just used a paper towel with
: WD-40 to remove all the surface
: deposits and grime. Depending on how
: it looks in the car I may use it as is.
: I don't want to sand or polish away
: what's left of the shift pattern.
:
: Doug L.
:
:
: --Previous Message--
: I've had good results restoring old
: plastic knobs by screwing a stud in
: them and chucking up in a drill press
: and use progressively finer polishing
: compound, grit determined by how bad
: they are, with an optional shot of
: clear afterward.
: Don't know if it will work in your case
: but might be something to consider...
: Glen
:
:
:
Responses