Hi. There is no pcv port as this car has w eber carbs. and a Triumphtune manifold..
P.J.
--Previous Message--
: After re-reading this post I have another
: stupid question.
: I assume that the PCV valve/port is
: blocked off so that no air/vapors can
: get in the manifold?
: Glen
:
: --Previous Message--
:
:
: --Previous Message--
: Sorry for the side-Discussion but
: Glen's
: comment interests me.
:
: Our Mk1 does have the PCV. However, I
: have fitted a NOS part with a diaphragm
: that is still pliable. On my son's
: Spitfire I simply connected a draft
: tube the valve cover's nipple and ran
: that back and down so it exits under
: the frame... like cars from the 1950s.
: If you don't run the PCV valve what
: have you guys done?
:
: Doug L.
:
:
:
: --Previous Message--
: Stupid question...you don't have one of
: those goofy "PCV" that came
: on a few years, ie the ones with a
: diaphragm in them that ruptures and
: oils up a couple cylinders?
: No?
: Good, sorry I had to ask...
: Keep us posted.
: Glen
:
:Hi. Actually yes I do have one of those.
: It came from a 68 GT6 MK.1 I mounted
: it at the rear of the engine and
: removed the diaphragm. Ran a hose from
: the valve cover to the body of the PCV
: valve and another tube down the rear of
: the engine to the bottom edge of the
: block. Sort of a drip machine for the
: road.
: P.J.
:
:
:
:
:
Responses