Ciao! and good luck,
Jim
--Previous Message--
: Ed, I hust re-read your original post, am
: I correct that you repalced the 'ear'
: bushings?
: It's possible the the inner steel tube
: section is too wide. If you still have
: the old ones, measure and compare.
: If the new ones are too wide, can use a
: grinder disk or similar to trim them.
:
: Carter
:
: --Previous Message--
: Excellent idea! 'was just this morning
: talking about a "carrier" to
: help hold/stabilize this foot-ball
: shaped boat anchor while wrestling it
: around. I'll do that as well. Thanks
: John.
:
: --Previous Message--
: If you haven't, I'd suggest making a
: diff.carrier from some scrap wood. A
: solid block with a couple of
: cross-pieces will stabilise the diff on
: the jack, esp. if you tie it on!
: makes lifting and lowering, while you
: get it ll lined up much easier.
:
: John
:
:
:
:
:
Responses