Chuck
clw2000@msn.com
--Previous Message--
: These:
:
: http://www.btinternet.com/~jon.wolfe/wolfitt_products_1.htm#Anti
: roll bar drop links - rod end
: conversion
:
: I don't race this car, so never
: installed them. They're brand new.
: Wolfitt wants about $80 for them +
: shipping from UK. I'll take $50 shipped
: in the US.
:
: --Previous Message--
: 1. these are a perfect fit, by the way,
: and very nicely made.
: 2. these will allow you to use the
: frame upper shock mount (like the
: non-roto cars) rather than the weak
: body mount (which was made to clear the
: roto donut). You'll need the shorter
: non-roto shocks for that.
: 3. I will consider offers if you don't
: think that's a fair price.
:
: --Previous Message--
: Changing directions on this car and no
: longer have a need for these, so
: putting them out there for someone who
: might want them. This is a pair of
: Canley Classics CV axles for rotoflex
: cars. They were installed on my car for
: a couple hundred miles (I don't drive
: it much) and work fine. A few minor
: issues:
: 1. On one of them the threads at the
: end are slightly stripped. Can be
: re-tapped.
: 2. On one of them, there is some
: imperfection on the axle where it
: "rises." This is not a
: bearing contact area. not sure whether
: it came to me like that or I did it
: somehow, but it has no effect on
: anything other than cosmetically.
: 3. Tiny slice in one of the boots. Like
: 1/2 cm. long. Doesn't leak any grease -
: I had a temp fix using some black
: silicone. Replacement boots can be
: gotten from Canley if it's an issue for
: about 15 bucks.
:
: Only other thing of note is that
: because of machining tolerances on the
: original spindles, the outer CV joint
: bore "may" rub or foul the
: inner collar of the spindle. On mine I
: just bored the spindle backs out a bit
: with a grinder, but a machine shop
: could probably do a cleaner job. Canley
: notes this in their instructions as
: well.
:
:
:
:
: http://www.canleyclassics.com/?xhtml=xhtml/product/cvkit1.html&xsl=product.xsl
:
: These go new for (current rate) over
: $800 + shipping.
:
: I will sell them for $500 shipped to
: the US. I need money for other
: projects!
:
: pics showing everything mentioned
: above. Let me know if you're interested
: via email or here.
:
:
:
: http://i78.photobucket.com/albums/j85/irish44j/DSCN1742.jpg
:
:
:
:
: http://i78.photobucket.com/albums/j85/irish44j/DSCN1743.jpg
:
:
:
:
: http://i78.photobucket.com/albums/j85/irish44j/DSCN1744.jpg
:
:
:
:
Responses