Do fit the box You need the engine backing plate from a TR and an extended pilot bushing to engage more of the input shaft. The clutch slave can be mounted using the 2.5 Saloon mount or fabbed at home.
--Previous Message--
: Guess I am a throwback and date myself
: but.....I have most of the Triumph
: tools for gbx repairs and
: inspect/rebuild very carefully every
: one I do. I treat each one like it is a
: race car transmission.....Haven't had
: problems...knock on wood. Everyone has
: opinions, just voicing mine.
:
: --Previous Message--
: The few TR6 gearboxes I have seen are
: quite a bit larger than the 3-rain and
: single-rail boxes. I imagine a lot of
: tweaking and fabricating would be
: required to make a TR6 gearbox fit. I
: expect a new tunnel cover would be
: required and that it would encroach a
: lot into the cabin.
:
: Doug L.
:
: --Previous Message--
: Sorry for bit of confusion, my car is a
: Mark 3 GT6. Transmission has had a hard
: life. Suzuki in Bugeye looked great fun
: but any alternate trans would have to
: be adapted by someonelse. I can
: assemble but I can't design. Thought
: about a TR6 trans but you never hear of
: anyone doing it so there must be some
: problem.
:
:
:
:
:
Responses