Posted by SS on 11/1/2009, 9:57 am, in reply to "Re: Adapt Spit 1500 throttle bracket to GT6?"
207.200.116.131
I'll take a piccy later on. It is the same bracket that holds the throttle cable. With the steel snapon clip. Mount it to the front carb and it will be able to operate both equally.
You may have to drill and tap a hole for it, sometimes...
--Previous Message--
: Thanks steve...I didn't see any pics -
: got any? I'm not visualizing what the
: "Choke bracket" from the Mk4
: looks like (assuming it's something
: different from the throttle cable
: bracket?)
:
: --Previous Message--
: It's easy and well worth the effort.
: Go
: to GT6.com and search the first half
: dozen issues. There's an article there
: on how I did it.
:
: Or go to the last paragraph of this
: page:
:
:
: http://gt6.com/triumph/issue4/article.asp
:
: --Previous Message--
: Anyone aware of a way to adapt the
: pivot-like throttle bracket from the
: Spit 1500 to a GT6. It looks like on
: the 1500 it actually bolts to a section
: of the intake manifold that the GT6
: obviously doesn't have. Has anyone
: managed to figure out a way to
:
: In short, I fitted a cable throttle to
: twin SU 1.75s on my GT6 using a Spit
: 1500 (or GT6 Mk3) pedal, eliminating
: the solid rod linkage, but I'm finding
: it far too "hair trigger"
: when on a direct cable to the carb
: throttle bar. I think I need something
: with a bit more preload, hence the
: interest in the Spit 1500 piece...
:
:
:
:
:
Responses: