Posted by Glen
on 1/1/2009, 5:24 pm, in reply to "Half-Shaft repairs"
70.149.104.100
The flange can be a real PITA to remove.
The inner bearing rides directly on the shaft & the journal surface often suffers.
Also several different axle shaft lengths were used over the years so they are not all interchangable.
HTH
Glen
--Previous Message--
: Got a "Flinger" working it's
: way open on the drivers side, and stiff
: rolling resistance on the right
: trunnion. I recently received nearly
: the complete rebuild kit [seals,
: bearings etc] from Nigel at SpitBits.
: Ok so far. Before I go and try and
: build my own special tool for pulling
: the hub, does any one re-build these as
: a service? I have a spare right
: assembly from a donor '79 that I plan
: to "exchange/use" for now.
: Any ideas?
:
Responses: