Triumph GT6 And Spitfire Message Board: Re: Shaving GT6 head

Triumph GT6 And Spitfire Message Board
[ Post a Response | Triumph GT6 And Spitfire Message Board ]

Re: Shaving GT6 head

Posted by Mike on 12/31/2008, 6:04 pm, in reply to "Shaving GT6 head"
74.225.190.135

If the block has not been milled and you have flat top pistons a combustion chamber depth of .425 should be around 9.25

Mike

--Previous Message--
: I have a 72' GT6 that I am looking to
: increase the CR on. I was going to
: shave the head but not sure how much to
: achieve a 9.25:1 CR. I am thinking I
: should take off between 0.045 to 0.050
: off. Does that sound about right or is
: that too much?
:
:
:

Responses:

Re: Shaving GT6 head - JohnD 1/1/2009, 1:10 pm
- Re: Shaving GT6 head - Glen 1/1/2009, 4:27 pm

« Back to thread

Post a Response

Your Name:

Your Email:

Subject:

Message:

--Previous Message-- : If the block has not been milled and you : have flat top pistons a combustion : chamber depth of .425 should be around : 9.25 : : Mike : : --Previous Message-- : I have a 72' GT6 that I am looking to : increase the CR on. I was going to : shave the head but not sure how much to : achieve a 9.25:1 CR. I am thinking I : should take off between 0.045 to 0.050 : off. Does that sound about right or is : that too much? : : : : :

Optional Image URL:

Optional Link Title:
Optional Link URL:

Notify me by email of all message replies.

By posting, you confirm that you have read and agreed to be bound by the board's usage terms.