Posted by Josh on 4/18/2008, 6:43 pm, in reply to "Re: Confirm 240Z pads fit GT6?"
71.246.252.15
Thanks! That will make things alot easier. Drilling out the pin holes is not a problem.
--Previous Message--
:
: The 240Z pads fit but you may have to
: drill out the pin hole, dependant upon
: your calipers.
: --Previous Message--
: Josh try the TR-6 application, same
: caliper.
: There are two different Girling 16P
: calipers used on the TR,
: "big" pin &
: "little" pin. The big pin is
: approx .250 & the little pin is ...
: a little littler...
: They also used two different lining
: shapes, full width & tapered.
: Yes one of the z-car pads does fit but
: I can't recall the difference.
: HTH
: Glen
:
:
: --Previous Message--
: I've always liked Hawk pads for street
: use on other cars and haven't been as
: pleased with the EBC pads I've used.
: But, of course, Hawk lists no pads for
: the GT6. I read long ago someplace that
: 240Z pads will fit GT6 calipers, and
: the measurements on hawk's site are
: pretty close.
:
: Can anyone confirm if 240Z pads will
: fit the GT6 fronts?
:
:
:
:
:
  |
|
Responses:
|