Posted by Joseph P Siam on 11/23/2007, 10:25 am, in reply to "Re: GT6 Header also check"
71.116.132.208
Thanks Glen Steve Dale would be the guy. All he needs is a gasket and he could use it as a pattern. Joe
--Previous Message--
: Joe, I am very close to building a
: header, I wonder if we should talk to
: Mordy or Dale and get a few flanges
: cut. I'm thinking they could perforate
: the center bits and we could finish
: cutting them after the tubes are stable
: and secure. Whatdya think?
:
: --Previous Message--
:
: ...Joe I would also check the clearance
: under the inlet manifold, it could run
: into the header tubes.
: FWIW I checked my old Pacesetter
: catalog & they show a different pn
: for the GT-6 as compared to either
: early/late TR-6.
: HTH
: Glen
:
: --Previous Message--
: Thanks Steve, Yes I need one. I have
: found one for a TR6 with a single exit.
: It measures OK in the height so ground
: clearance shouldn't be a problem so I
: think it will fit. Building a exhaust
: system from the header back is no
: problem as I build a few in the past.
: thanks Joe
:
: --Previous Message--
: Joe has a customer's GT6 awaiting
: delivery and can't find a header in the
: US. TR6 headers are a bit easier to
: find but he needs to know if it will
: fit before splashing out the money that
: he may not be able to recoup.
: If anyone has a spare laying around Joe
: neds it
:
: --Previous Message--
: Assuming you mean mk2/3 GT6.
:
: Not sure about US spec TR6 but European
: ones are different. GT6 has single
: outlet, TR6 has twin outlets side by
: side.
:
: The TR6 one alledgedly flows better and
: will fit the GT6 head but
: modifying/fabbing the twin downpipes to
: miss both engine and chassis (and
: steering column on RHD) will be a
: challenge. Why do you ask?
:
: Nick
:
: --Previous Message--
: Hi All is there a difference between a
: GT6 and a TR6 header? If so what are
: the differences? Thanks joe
:
:
:
:
:
:
:
:
:
:
:
  |
|
Responses:
|